Prisma table leg set matte black 27-3/4 in

Prisma Table Leg Set Matte Black For Work Surfaces

Prisma table leg set matte black from Camar uses the Peter Meier Prisma Series steel leg system to support work surfaces and tables where a clean, rounded look is needed. The 2-3/8 inch diameter steel construction provides a solid base that resists flex under typical work surface loads. Each leg has a 27-3/4 inch length for standard table-height installations, so tops finish at a familiar working level when planned into a project. The rounded design presents smooth edges around seating areas, which helps keep knees and clothing away from sharp corners. The matte black finish gives a low-sheen appearance that visually blends with many modern casework and frames. With a load bearing capacity of 660 lb per leg, this set supports heavy tops and equipment, allowing installers to design with stone, thick wood, or dense composite panels within that rating.

Key Prisma Rounded Table Leg Capabilities

• The steel Prisma Series construction with 660 lb per leg capacity carries substantial table and work surface loads, so a four-leg layout handles demanding residential or commercial tops within the stated rating.
• The 2-3/8 inch diameter profile spreads support over a larger footprint at each corner, which helps stabilize the table structure and reduces deflection at the mounting points.
• The 27-3/4 inch leg length is designed for table-height applications, keeping worksurfaces at a comfortable height when matched with typical top thicknesses.
• The matte black finish creates a subdued, modern appearance that works with dark or light tops, helping legs recede visually under desks, tables, and workstations.
• Separate brackets supplied with each leg provide a defined interface between leg and top, which simplifies locating legs during layout and helps maintain consistent alignment across multiple installations.
• The built-in 1-1/8 inch adjustable feet provide height tuning at floor level, allowing installers to level tables on uneven surfaces without altering the table top or structure.

Installation Details For Prisma Steel Table Legs

The Camar Prisma Series table legs use separate brackets to attach each 2-3/8 inch diameter leg to the underside of the table, creating a consistent connection pattern for repeated projects. Legs at 27-3/4 inches set up well for standard table-height builds when paired with typical top thickness, so layout work aligns with common ergonomic expectations. The built-in 1-1/8 inch adjustable feet give vertical adjustment at the floor, letting installers compensate for minor floor irregularities while keeping the top plane true. With 660 lb per leg load bearing capacity, installers can plan heavier tops or equipment placements within the rating without overbuilding substructures around the leg connection.

Using Camar Prisma Legs In Real Projects

Where Prisma Rounded Table Leg Set Works Best

The Camar Prisma steel table legs in matte black fit projects that call for a clean, cylindrical support under work surfaces and tables. The 27-3/4 inch leg height aligns with standard table applications, so these legs integrate into desks, meeting tables, and workstations built around common chair heights. The 2-3/8 inch diameter gives each corner or support point a visually balanced proportion under thicker tops, helping the finished table look intentional rather than improvised. With a 660 lb per leg load bearing capacity, these Prisma legs suit installations where tops may carry equipment, stacked materials, or dense surface materials within that rating. The matte black finish allows the support structure to blend with dark frames or provide contrast under light-colored tops in commercial or residential settings.

Details That Support Consistent Prisma Installations

The Prisma Series system uses separate brackets with each leg, giving installers a defined mounting interface that repeats from table to table for predictable results. By fastening the bracket to the underside of the top and then connecting the 2-3/8 inch diameter leg, the assembly process stays organized and repeatable across multiple units on a job. The built-in 1-1/8 inch adjustable feet allow fine tuning of each leg height at the floor, which helps achieve a flat work surface even when the subfloor varies slightly from point to point. Because the legs are specifically 27-3/4 inches high for table-height use, projects can be designed around that dimension without recalculating each time. The 660 lb per leg capacity provides a clear structural reference during planning, guiding how many legs are used and where loads are concentrated on the surface.

Common Questions About Camar 330-70-MT Table Legs

Select Prisma Table Leg Set For Your Next Top

The Camar Prisma table leg set in matte black offers 2-3/8 inch diameter steel legs at 27-3/4 inches high, giving a clear solution for standard table-height projects. With a 660 lb per leg capacity and built-in 1-1/8 inch adjustable feet, these legs support heavy tops and on-site leveling needs in one system. Using the supplied brackets as the interface between leg and surface, installers can repeat layouts efficiently across multiple tables. For work surfaces and tables built around the Prisma Series dimensions and finish, this leg set provides a defined, project-ready support option.