8082 EZ Pivot Door Slide For Medium Doors

8082 EZ pivot door slide defines this Knape and Vogt pocket door hardware as a 12 inch, 30 lb class solution for medium-duty doors that need to pivot and slide into a cabinet, keeping fronts clear when doors are open. The product is described as self-closing, so the slide is designed to pull the pivoting door closed at the end of travel, which supports consistent door position when the door is returned. The 8082 PEZ 12 model is part of the KV 8080/8081/8082 family rated for medium-duty doors, so it suits applications that match the stated 30 lb class where a standard cabinet slide would not provide the pivoting action. Maximum door dimensions of 42 inch high by 24 inch wide define the operating envelope, helping align door size to the slide capability. The anochrome finish provides a neutral, metallic appearance that works with many cabinet interiors.

Key Pocket Door Hardware Details For Projects

• The KV 8080/8081/8082 family is rated as 30 lb class for medium-duty doors, so this slide serves projects where the door weight and usage fit that rating, helping match hardware to typical multimedia or cabinet doors.
• Maximum door dimensions of 42 inch height by 24 inch width set clear limits for door size, guiding layout of cabinet openings and door panels so the slide can operate through its full travel without binding.
• Top and bottom slides are attached with a wood follower strip prior to installation into the cabinet, so the installer builds a single slide-door assembly that can be set into the opening in one step, simplifying alignment.
• Precision steel ball bearings are used in the slide, supporting smooth and quiet operation as the door pivots and retracts, which is important in office, residential, or multimedia environments where noise control matters.
• Multiple hinge options are supported for inset, free-swing, overlay, thick, and extra thick door applications, so the same slide system can be applied to different door constructions and face conditions on similar projects.

Mounting And Alignment Details For Installation

The web description states that the top and bottom slides are attached with a wood follower strip before the assembly is installed into the cabinet, which means the installer fastens both tracks to a straight strip to keep them parallel. That follower strip then guides the entire slide set into the cabinet, supporting consistent spacing between top and bottom tracks and helping the door run true. Precision steel ball bearings in the mechanism guide the door as it moves, so once the tracks are set square and plumb, the internal bearings carry the load smoothly through the pivot and slide cycle. The self-closing function adds a controlled pull at the end of travel, reducing the need to manually seat the door tightly against the cabinet face after use.

Using This Pocket Door Slide In Real Projects

Where This Pocket Door Hardware Works Best

This Knape and Vogt pocket door slide is categorized as pocket door hardware and multimedia and workspace components, so it suits cabinets where doors need to retract out of the way instead of swinging into the room. The family description as 30 lb class, medium-duty doors, aligns with typical cabinet, multimedia, or workspace doors that fall within the 42 inch by 24 inch door size specification, keeping the slide within its intended range. The model is described as having hinge options that support inset, free-swing, overlay, thick, and extra thick door applications, giving flexibility to use the same slide architecture on different face treatments across a project. The anochrome finish coordinates with many interior cabinet finishes, which helps maintain a consistent appearance in open cabinets where hardware remains visible.

Details That Support Repeatable Door Performance

The design uses precision steel ball bearings, which carry the moving door on defined bearing races so the load is distributed along the slide, supporting smoother travel over repeated cycles. The self-closing description indicates that the mechanism draws the door closed at the end of its stroke, which helps seat the door against the cabinet consistently and can reduce partial closing. Top and bottom slides are joined by a wood follower strip before being installed, creating a rigid assembly that maintains parallelism between tracks so the door does not rack during movement. The cassette roller, described as adding protection for raised panel doors, helps guide and support doors with profiled faces, which can reduce contact between the panel profile and cabinet edges. The product family is available in black and anochrome finishes, allowing a choice that matches other hardware in the installation for a coordinated project.

Common Questions About The 8082 EZ Slide

Selecting This Slide For Pocket Door Projects

The Knape and Vogt 8082 EZ pivot door slide with baseplate is defined as a 12 inch, 30 lb class, self-closing pocket door hardware solution for medium-duty doors up to 42 inches high by 24 inches wide. The use of precision steel ball bearings, a wood follower strip connection between top and bottom slides, and hinge options for inset, free-swing, overlay, thick, and extra thick doors ties this slide to cabinet, multimedia, and workspace applications that need retracting doors. For projects matching these dimensions, door types, and finish preferences, this slide offers a defined set of characteristics to align with project requirements.