8082 EZ Pivot Door Slide For Medium Doors

8082 EZ pivot door slide with baseplate is a Knape and Vogt pocket door hardware solution rated as a 30 lb. class for medium-duty doors, so it supports typical cabinet or multimedia doors without overbuilding the hardware. As part of the KV 8080/8081/8082 family, it fits directly into projects already specd around these slide packs, which simplifies matching components across a run of cabinets. The slide is designed for doors up to 42 in. high by 24 in. wide, so it covers a common size range in entertainment, closet, and workspace applications. This 24 in. model aligns with standard cabinet depths in many multimedia and workspace layouts, keeping door travel consistent with carcass dimensions. The self-closing function pulls the door back into position at the end of travel, which helps keep faces aligned when doors are stowed.

Key 8082 EZ Slide Details For Project Planning

• The 30 lb. class rating defines the load range as medium-duty, which helps match the slide to doors that carry typical panel and hardware weight without oversizing components.
• Maximum door dimensions of 42 in. high by 24 in. wide give a clear envelope for door design, so panel sizing, hinge selection, and stile widths can be laid out with confidence.
• Top and bottom slides attach to a wood follower strip before installation into the cabinet, which lets the assembly be worked on the bench for cleaner alignment and easier handling.
• Precision steel ball bearings provide smooth and quiet operation, which matters when doors pivot and retract in front-facing cabinetry where noise and drag are noticeable.
• The 8082 configuration provides attached hinge base plates on each slide, which reduces separate parts to track and speeds up setting hinge locations relative to the slide travel.
• Available Anochrome finish allows coordination with other KV hardware in similar finishes, keeping visible components consistent in higher-end cabinet interiors.

Pivot Door Slide Mounting And Hinge Options

The KV Model 8080/8081/8082 series is designed as pocket door slides, so they support doors that retract back alongside the cabinet interior rather than swinging only on face hinges. Multiple hinge options are supported, including inset, free-swing, overlay, thick, and extra thick door applications, allowing one slide family to serve different door builds across a project. In the 8082 variant, hinge base plates are attached to each slide, so hinge layout is indexed directly from the slide body during mounting, which helps maintain consistent reveals. Top and bottom slides are first fastened to a wood follower strip, then that assembly is installed into the cabinet, which keeps both tracks in plane along the full travel path.

Using The 8082 Slide In Cabinet Work

Where This Pocket Door Hardware Performs Best

As pocket door hardware in the multimedia and workspace components category, the 8082 slide suits cabinets where doors need to open and then pivot back into the case. The 24 in. slide length aligns with common cabinet depths used in entertainment units and workstations, so the door can retract without extending beyond the cabinet interior. With a maximum door size of 42 in. high by 24 in. wide, it fits many upper and tall cabinet doors used to conceal equipment or work areas. The 30 lb. class rating supports medium-duty doors, which typically cover doors built from standard panel materials plus hinges and pulls in these applications.

Details That Support Repeatable Door Results

The 8082 configuration supplies a pair of attached hinge base plates on each slide body, so the hinge interface is fixed in relation to the slide travel path and helps repeat door positioning from cabinet to cabinet. Because top and bottom slides mount first to a wood follower strip, both tracks can be squared and spaced on the bench, which supports straight travel and reduces side loading once installed in the cabinet. Precision steel ball bearings inside the slides give a smooth, quiet motion that keeps doors from binding as they pivot and retract, which is important for maintaining alignment over the full height of a 42 in. door. A cassette roller, available separately for raised panel doors, adds support at the stile area during movement, which helps carry the profile of more decorative door designs. The self-closing feature pulls doors back toward the stowed position at the end of travel, which helps keep fronts flush when the doors are parked inside the cabinet and contributes to consistent reveals.

Common Questions About KV 8082 EZ Slides

Selecting This 8082 EZ Slide For Your Project

The Knape and Vogt 8082 EZ pivot door slide with baseplate, in a 24 in. length and 30 lb. class rating, aligns with cabinet projects needing medium-duty pocket doors that retract into the case. Defined maximum door dimensions of 42 in. by 24 in. simplify door engineering around this hardware family, while the attached hinge base plates on the 8082 variant connect hinge layout to slide travel. For multimedia, closet, or workspace cabinetry using the KV 8080/8081/8082 line, this model provides a clear, documented basis for specifying the pocket door function.