Medium Duty 30 lb Traditional Installation Method 14" Pocket Door Slides with Base Plates (No Hinges) Anochrome Knape and Vogt 8082PEZ 14

14 Inch Pocket Door Slides For Medium Duty Doors

14 inch pocket door slides from Knape and Vogt in the 8082PEZ 14 configuration provide a medium-duty solution rated at 30 lb class, so they support typical cabinet or multimedia doors without overbuilding the hardware for the application. The slides are part of the KV 8080/8081/8082 30 lb class family, which gives you a consistent performance level when you are standardizing hardware across several pocket door openings. Maximum door dimensions of 42 inches high by 24 inches wide define the envelope these slides are designed to move, helping you match door size to hardware capability during layout. The product sits in the pocket door hardware class, so it is intended for use where doors need to retract into a cabinet or enclosure while still operating smoothly on the slide system.

Key Pocket Door Slide Details For Installers

• The 8082PEZ 14 designation identifies a specific Knape and Vogt pocket door slide set, which helps you match new installs or service replacements to an existing 8082-based layout for consistent action.
• A 30 lb class rating defines the medium-duty performance of these slides, guiding door construction and hardware pairing so door weight stays within the intended operating range.
• Maximum door dimensions of 42 inches high by 24 inches wide set a clear working envelope, letting you size doors with confidence around this slide system.
• Top and bottom slides are attached with a wood follower strip prior to cabinet installation, so you can assemble the moving door system on the bench before fitting it into the casework.
• Precision steel ball bearings in the slides provide smooth and quiet operation, which supports clean motion for multimedia or workspace doors where frequent opening and closing is expected.
• Available Anochrome finish on this model offers a neutral, metallic appearance that integrates well with typical cabinet interiors and other hardware components.

Traditional Pocket Door Slide Installation Workflow

The 8082PEZ 14 pocket door slides use a traditional installation method where the top and bottom slides are attached with a wood follower strip prior to the slide being installed into the cabinet, so you can build and align the moving assembly before bringing it to the case. Mounting hardware is provided in the 8082 slide packs, which allows you to fasten the slide components during this bench assembly step. A pair of attached hinge base plates is fixed to each slide in the 8082 configuration, so the interface between door hinges and slides is already established when you position the unit. This approach supports a predictable installation sequence for pocket door hardware in cabinetry and workspace furniture.

Using 8082PEZ 14 Pocket Door Slides On Projects

Where These Pocket Door Slides Are Applied

The 8082PEZ 14 pocket door slides are part of the Knape and Vogt 8080/8081/8082 medium-duty pocket door slide line, so they are suited to door applications that fall within a 30 lb class loading and the specified 42 inch by 24 inch maximum door envelope. The product is categorized as pocket door hardware in the shelf, closet and garage organization and multimedia and workspace components group, placing it in projects where doors retract back to clear equipment or storage. Cassette rollers are available separately for this system and add protection for raised panel doors, which matters when a project uses profiled door faces that benefit from guided travel. Multiple hinge options, including inset, free-swing, overlay, thick and extra thick, are supported by the slide system, so a single slide family can serve different door overlay conditions in a built-in installation program.

Details That Support Repeatable Pocket Door Results

In the 8082 slide packs, a pair of attached hinge base plates is mounted to each slide, creating a stable interface for hinge attachment that helps maintain consistent reveals when you repeat the same layout across several cabinets. The presence of mounting hardware in these 8082 slide packs allows you to follow the same fastening pattern on every install, supporting uniform alignment from job to job. Top and bottom slides are designed to be connected to a wood follower strip before being installed into the cabinet, which lets you square the door movement path on the bench and then transfer that alignment into the case. Precision steel ball bearings inside the slides deliver smooth and quiet travel, which supports accurate operation when doors are moved in and out of the pocket multiple times per day. The 30 lb class rating defines the intended door construction range, so when door builds remain within that class, the slides are working inside their designed load expectations.

Common Questions About 8082PEZ 14 Pocket Door Slides

Select 8082PEZ 14 Slides For Pocket Door Projects

The 8082PEZ 14 Knape and Vogt pocket door slides combine a 30 lb class medium-duty rating with defined maximum door dimensions of 42 inches by 24 inches, giving you clear design parameters. The traditional installation method with a wood follower strip, attached hinge base plates, and precision steel ball bearings creates a predictable, smooth-operating pocket door system. For projects in the pocket door hardware category that call for retracting doors in cabinets or multimedia enclosures, this 14 inch slide configuration aligns door size, load class and installation workflow into a single, repeatable solution.