CompX Timberline Cam Lock Cylinder Body, Horizontal Mount with Flat Cam, Cam length 1-1/4" - CB-184

CompX Timberline Cam Lock Cylinder Body Purpose

CompX Timberline cam lock cylinder body gives you a horizontal mount locking point for door or drawer applications in 3/4 inch material, so you can set up consistent lock positions across cabinetry, furniture, desks, and lockers without reworking layouts. The CB-184 configuration uses a flat cam with a 1-1/4 inch cam length, which reaches reliably to standard strike locations on many cabinet doors and drawers for straightforward lock engagement. The design is a cam lock for door or drawer locking in cabinetry, furniture, desks, and lockers, so it serves as a single style you can repeat across different casework pieces in the same project. A 180 degree cam rotation CCW operation means the rotation is predictable from one installation to the next, which supports uniform key motion wherever this cylinder body is installed.

Key Locking Details That Support Installers

• The CompX Timberline cam lock cylinder body is intended for 3/4 inch material thickness, so it aligns with common cabinet side and front construction and helps prevent extra machining passes.
• The horizontal mount layout positions the cylinder body for side-facing applications, which is useful when designing furniture and desks where vertical mounts are impractical or conflict with interior components.
• The 1-1/4 inch flat cam length lets the cam travel reach typical door and drawer contact points, supporting dependable locking action across many cabinetry and locker layouts.
• The 180 degree cam rotation CCW motion defines exactly how the cam moves between locked and unlocked positions, aiding repeatable drilling and stop settings during production work.
• The cam lock is specified for door or drawer locking in cabinetry, furniture, desks, and lockers, which lets one part number cover multiple casework types on the same job.

Horizontal Mount Cam Lock Installation Context

The CB-184 horizontal mount with flat cam is built for 3/4 inch material thickness, so boring patterns and edge distances can be planned around that thickness when laying out cabinet sides or drawer fronts. Because this is a cam lock for door or drawer locking in cabinetry, furniture, desks, and lockers, it fits directly into many standard casework drilling routines where the lock body passes through the front and the flat cam swings behind. The 1-1/4 inch cam length provides a defined reach behind the door or drawer, which supports consistent engagement with fixed strikes or cabinet frames in repeated production runs. With a 180 degree cam rotation CCW, the operating arc is fixed, so installers and fabricators can align the locked and unlocked positions precisely during setup.

Using CB-184 Cam Lock Cylinder Body In Projects

Where This Cam Lock Cylinder Body Fits Best

This CompX Timberline cam lock for 3/4 inch material thickness is suited to cabinetry, furniture, desks, and lockers where panels are built around that common thickness, so the cylinder seats correctly in the material. As a cam lock for door or drawer locking in cabinetry, furniture, desks, and lockers, it works across multiple storage points in the same room, such as cabinet doors above and drawers below a work surface. The horizontal mount orientation is particularly practical on desks and certain furniture cases where the lock face is on a vertical panel but internal clearances favor a side-mounted cylinder body. The 1-1/4 inch flat cam length lets the cam sweep behind door or drawer edges to catch rails or fixed catches, supporting secure closure in many cabinet and locker layouts.

The CB-184 cam lock cylinder body carries the manufacturer part number CB-184 and is identified as CYLINDER BODY, TYPE 184, which helps match it to drawings and hardware schedules that specify that style. Because it is a CompX Timberline cam lock cylinder body, it ties into the CompX Timberline system used widely in woodworking and casework projects. The flat cam installed on this horizontal mount body gives a simple, predictable contact surface against frames or strikes, which simplifies alignment when several locks are set at the same reveal line. The defined 3/4 inch material intent, combined with the 1-1/4 inch cam length, provides clear geometry for designers creating cabinet, furniture, desk, and locker layouts around this locking point.

Why These CB-184 Details Matter In Daily Use

The 180 degree cam rotation CCW operation of this CB-184 cam lock establishes a consistent turning motion that users experience at every locked door or drawer, which helps keep operation intuitive across multiple cabinets or lockers in a space. Since the cam lock is specified for door or drawer locking in cabinetry, furniture, desks, and lockers, installers can standardize around this cylinder body on mixed projects rather than switching between different cam lock types. The 1-1/4 inch flat cam length defines the swing path behind the panel, giving predictable clearance when routing shelves, dividers, or locker interiors around the cam travel zone.

The cam lock for 3/4 inch material thickness means the shoulder and body depth are matched to that panel size, so the cylinder face sits appropriately relative to the surface when bored to the correct depth. As part of the CompX Timberline cam lock family, this cylinder body is designed to accept a CompX Timberline lock plug that is ordered separately, which allows keying plans to be managed through the plug selection while keeping the same CB-184 body installed. The horizontal mount with flat cam installed supports layouts where the cam must sweep laterally behind the closure, such as sliding past a cabinet frame rail or locker jamb, which can reduce layout changes between adjacent locking points.

Buyer Questions About CB-184 Cam Lock Details

Select CB-184 Cam Lock Cylinder Body For Casework

The CB-184 CompX Timberline cam lock cylinder body provides horizontal mount locking for door or drawer applications in 3/4 inch material, using a flat cam with 1-1/4 inch cam length and 180 degree CCW rotation to support predictable locking layouts in cabinetry, furniture, desks, and lockers.