CompX Timberline Cam Lock Cylinder Body, Horizontal Mount with Off-Set Cam, Cam length 1-1/4" - CB-188
Description
CompX Timberline Cam Lock Cylinder For 3/4 Inch Panels
CompX Timberline cam lock cylinder body is a horizontal mount cam lock cylinder designed for cabinet and furniture applications where a dedicated cam lock is required in 3/4 inch thick material. The CB-188 cam lock cylinder body provides 180 degree rotation, so the cylinder turns through a clear half-turn to drive the off-set cam between locked and unlocked positions, which simplifies positioning the cam against a strike. All locks requiring a 16.5 mm diameter bore hole tie the cylinder directly to a precise machining step, which supports repeatable drilling on production runs. The design to mount in 3/4 inch thick material with a 3/4 inch long cylinder places the locking mechanism properly within standard panel thicknesses, helping keep the cam in line with typical cabinet door or drawer geometry. Locks installed to lock in a counter clockwise position create a consistent key motion across a project.
Key CB-188 Cam Lock Details For Daily Use
- 180 degree rotation on this cam lock cylinder body creates a straightforward open-and-close motion, which helps installers align the off-set cam travel with the strike contact area.
- The requirement for a 16.5 mm diameter bore hole gives a clear drilling size, which supports accurate hole preparation with metric or fractional bit conversions in a shop workflow.
- Design to mount in 3/4 inch thick material with a 3/4 inch long cylinder positions the lock body centrally in common cabinet side panels, supporting even cam reach to the mating strike.
- Horizontal mount with off-set cam and a 1-1/4 inch cam length places the cam throw out from the cylinder centerline, which helps the lock engage strikes located away from the bore center.
- Locks installed to lock in a counter clockwise position standardize the key turn direction, which can simplify user orientation and reduce callbacks related to key operation questions.
Mounting And Bore Details For Clean Installation
This horizontal mount cam lock cylinder body uses a 16.5 mm diameter bore hole, so machining focuses on one main hole size for the cylinder body. Designed to mount in 3/4 inch thick material with a 3/4 inch long cylinder, the CB-188 cam lock cylinder body sits properly within typical case sides or fronts, helping the off-set cam line up with a separate strike. Locks that must be installed to lock in a counter clockwise position also define the rotational orientation during installation, which supports setting up jigs and templates so each cylinder is oriented consistently across similar casework.
Using The CB-188 Cylinder Body In Locking Runs
Where This Horizontal Mount Cam Lock Fits Best
The CB-188 cam lock cylinder body is a horizontal mount configuration, so it fits applications where the cylinder is bored directly through a flat 3/4 inch panel. The requirement that all locks use a 16.5 mm diameter bore hole gives a single reference size for case sides or doors, which works well when boring multiple cabinets in a production line. Design to mount in 3/4 inch thick material with a 3/4 inch long cylinder suits common cabinet box construction, where side or rail thickness often matches that dimension. The off-set cam with a 1-1/4 inch cam length extends the cam reach beyond the cylinder centerline, so the lock interacts with a separately positioned strike in typical cabinet layouts.
Details That Support Repeatable Locking Performance
The 180 degree rotation of this cam lock cylinder body means the key turns through a half-turn from locked to unlocked, so users experience a simple, predictable motion in daily operation. Locks that must be installed to lock in a counter clockwise position define both the resting and locked cam positions, which aids installers who lay out multiple locks across drawer banks or door rows. Because all locks require a 16.5 mm diameter bore hole, drilling templates can be standardized, improving repeatability from one panel to the next. The mounting design for 3/4 inch thick material with a 3/4 inch long cylinder helps keep the cylinder shoulder and cam alignment consistent, which supports smooth engagement with a separate strike. The off-set cam and 1-1/4 inch cam length also help fine-tune how the cam sweeps past the strike contact point, which matters when aligning door reveals and achieving firm closure.
Common Questions About The CompX CB-188 Cylinder
What material thickness is the CB-188 cylinder body designed for?
The CB-188 cam lock cylinder body is designed to mount in 3/4 inch thick material, which matches common cabinet panels and helps the cam align with the mating strike.
What size bore hole does this cam lock cylinder require?
This CompX Timberline cam lock cylinder body requires a 16.5 mm diameter bore hole, giving a precise drilling dimension for shop layouts and drilling jigs.
How far does the off-set cam extend from the CB-188 cylinder?
The CB-188 uses an off-set cam with a 1-1/4 inch cam length, which extends the cam throw to reach a separate strike mounted away from the cylinder centerline.
What rotation does the CompX Timberline CB-188 provide?
The CB-188 cam lock cylinder body provides 180 degree rotation, delivering a half-turn motion between locked and unlocked positions for straightforward user operation.
In which direction does the CB-188 lock when installed?
The CB-188 must be installed to lock in a counter clockwise position, establishing a consistent key turn direction for end users across cabinets using this cylinder.
What is the manufacturer part number and brand for this cylinder body?
This cam lock cylinder body has manufacturer part number CB-188 and is from the CompX Timberline Lock brand, which identifies it within the CompX Timberline cam lock family.
Select The CB-188 Cylinder For 3/4 Inch Panels
The CB-188 cam lock cylinder body from CompX Timberline Lock matches 3/4 inch thick material with a 3/4 inch long cylinder, so it suits standard cabinet construction. With its 16.5 mm diameter bore hole requirement, 180 degree rotation, horizontal mount layout, and off-set 1-1/4 inch cam length, this cylinder body offers defined dimensions for drilling, setup, and consistent locking motion in woodworking projects.