CompX Timberline Lock Cylinder Body, Horizontal Mount with Setback 3/32" Off-Set, 13/16" Cam Ext - CB-180

CompX Timberline Cam Lock For Cabinet Security

CompX Timberline cam lock is designed as a cam lock for 3/4 material thickness in door or drawer applications, so it fits common cabinet, furniture, desk, and locker construction where 3/4 inch stock is used. The cylinder body is described as CYLINDER BODY, TYPE 180 and identified by manufacturer part CB-180, giving a clear reference when matching to existing CompX Timberline lock layouts. This cam lock operates with 180 degree cam rotation CCW, which turns the cam counterclockwise through a half-turn to move between locked and unlocked positions in typical cabinet layouts. The unit is a horizontal mount with 3/32 off-set cam installed, so the cam sits slightly off-center to engage strikes or frames that are not perfectly in line with the cylinder center. Cam length is 13/16, providing a defined reach for engaging cabinet frames or lock bars in standard furniture and casework.

Key CB-180 Cylinder Body Details For Installers

• The cam lock for 3/4 material thickness is sized for common cabinet and furniture construction, so installers can match it to standard doors and drawers without reworking panel thickness.
• The horizontal mount layout positions the CompX Timberline lock cylinder body along the edge of the door or drawer, supporting predictable alignment in cabinetry, furniture, desks, and lockers.
• The 3/32 off-set cam installed shifts the cam contact point slightly, helping the cam reach and engage strikes or cabinet frames that sit off the cylinder centerline.
• The 13/16 cam length extends the cam arm a defined distance from the cylinder body, which helps the cam reliably catch behind the cabinet frame or lock rail in many casework designs.
• The 180 degree CCW rotation means the cam turns counterclockwise through a half-turn during operation, allowing hardware planners to align the lock sense with other CompX Timberline cam lock positions.

Horizontal Mount And Cam Geometry For Fit

The CompX Timberline lock cylinder body CB-180 uses a horizontal mount configuration, placing the lock body in line with the door or drawer movement so the cam sweeps across the frame edge in a predictable arc. This cam lock is specified for 3/4 material thickness, which matches many cabinet sides and drawer fronts and helps the 13/16 cam extension land where the cabinet rail or frame is typically located. The 3/32 off-set cam installed moves the cam plane slightly away from the center, which helps the cam clear the panel edge while still reaching the strike area. Combined with the 180 degree cam rotation CCW, these details support repeatable fit where the lock is laid out to rotate the cam into a behind-the-frame locking position.

Using The CB-180 Cam Lock In Woodworking Projects

Where This Cam Lock Body Is Typically Applied

The CompX Timberline lock cylinder body CB-180 is specified as a cam lock for door or drawer locking in cabinetry, furniture, desks, and lockers, so it targets wood and casework projects where simple rotary cam action is needed. Its design as a cam lock for 3/4 material thickness aligns with many cabinet sides, drawer fronts, and locker doors, which helps the 13/16 cam extension reach the frame or strike behind these panels. Because the unit is a horizontal mount with 3/32 off-set cam installed, it is suited to layouts where the lock body lies horizontally along the door or drawer and the cam must reach slightly off the cylinder centerline to hook behind a rail or cabinet side. In practice, this geometry supports straightforward layouts in many standard woodworking and fixture builds that rely on cam locks.

How CB-180 Details Support Repeatable Lock Function

The CYLINDER BODY, TYPE 180 configuration combined with 180 degree cam rotation CCW defines exactly how the CB-180 cam moves, which helps hardware planners design lock engagement points that match the half-turn CCW motion. The 13/16 cam length provides a fixed reach from the cylinder body, so once the cylinder is positioned in a 3/4 material door or drawer, designers can locate the mating frame or bar at a predictable distance. The horizontal mount orientation keeps the cylinder body aligned with the door or drawer edge, and the 3/32 off-set cam shifts the locking surface enough to engage behind the frame while avoiding interference with the panel edge. Since the application is clearly stated as door or drawer locking in cabinetry, furniture, desks, and lockers, the CB-180 cam lock fits straightforward security points where a rotary cam needs to swing behind a cabinet frame or lock rail using a known CompX Timberline geometry.

Common CB-180 Cam Lock Questions Answered

Selecting The CB-180 For Your Next Installation

The CompX Timberline lock cylinder body CB-180 combines a cam lock for 3/4 material thickness with a horizontal mount, 3/32 off-set cam installed, and 13/16 cam length to create a defined cam path for cabinetry, furniture, desks, and lockers. Its 180 degree cam rotation CCW and CYLINDER BODY, TYPE 180 designation provide clear operating and identification details when aligning with existing CompX Timberline cam lock layouts. For projects that call for a known 180 degree CCW cam motion and off-set reach behind standard 3/4 inch doors or drawers, this CB-180 configuration offers a precise geometry to build around.