
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Steel table legs 3 inch diameter from the Camar Isola Series provide a load bearing capacity of 330 lb per leg, which supports heavy work surfaces or tables where dependable vertical support is critical. The leg length of 27-3/4 inch is suited to table-height applications, so installers can use it where a standard sitting-height work surface is required. The 3 inch diameter steel construction distributes load over a broader footprint, which helps the leg resist point loads and lateral movement under normal use. A welded mounting plate fixed to the leg extension creates a rigid joint between the work surface and support, which helps maintain alignment over time. The matte black finish gives a subdued appearance that works in many shop or commercial environments, so the leg can be used where a low-glare look is preferred.
The leg can be extended by 9 inch by rotating the top of the leg, which provides a built-in height adjustment range for fine-tuning finished surface height. This rotation-based extension lets you compensate for uneven floors or slight variations in top thickness without changing the base structure. The welded mounting plate, set at 6 inch diameter with four screw holes, defines a clear attachment pattern that speeds layout on the underside of the work surface. Because the plate is welded to the leg extension, the adjustment happens within the leg rather than at the fasteners, which helps preserve the integrity of the screw connections during height changes.
The 27-3/4 inch long Camar Isola steel table leg is suited to standard table-height installations, so it works in applications such as work surfaces and tables in woodworking or similar environments. The 3 inch diameter construction gives a substantial support profile, which is useful when supporting tops that see frequent use or concentrated loads. With a 330 lb per leg load bearing capacity, each leg can support a significant share of the overall table weight, which allows straightforward planning of leg placement based on known load capacity. The 6 inch diameter mounting plate with four screw holes is configured for underside mounting to a flat surface, so it aligns naturally with common table and work surface construction methods.
The welded mounting plate attached to the leg extension forms a rigid connection, which helps keep the leg square to the work surface during loading and movement. This rigidity reduces the tendency for the leg to twist at the joint, which supports consistent alignment over time in high-use installations. The ability to extend the leg by 9 inch by rotating the top gives a generous adjustment window, which helps when setting consistent final heights across multiple tables on an irregular slab or subfloor. Because the mounting plate remains fixed while the leg height changes, the screw pattern stays stable, so the installer is working with a predictable attachment point even when dialing in the final elevation. The matte black finish provides a neutral appearance that can visually recede under darker tops, which can be desirable in commercial or shop environments where function and a clean look are both important.
The leg length of 27-3/4 inch can be extended by 9 inch by rotating the top, which brings the maximum height extension to 27-3/4 inch plus 9 inch for setting final surface elevation.
The load bearing capacity of 330 lb per leg defines how much weight each support can carry, which helps when planning the number of legs needed for a given work surface or table.
The mounting plate is welded to the leg extension and has a 6 inch diameter with four screw holes, which creates a stable, rigid connection between the table leg and the work surface.
The leg can be extended by 9 inch by rotating the top of the leg, which allows straightforward height changes without altering the fixed position of the mounting plate on the surface.
This version uses a matte black finish, which offers a subdued appearance that can coordinate with dark work surfaces or frames in many shop and commercial settings.
The leg has a 3 inch diameter, which provides a broad support profile and helps distribute loads from the work surface down into the floor contact area.
The Camar Isola Series steel table leg combines a 3 inch diameter body, 27-3/4 inch table-height length, and 9 inch rotational height extension, which gives installers a clear set of working dimensions. The 330 lb per leg load bearing capacity and welded 6 inch diameter mounting plate with four screw holes define both the structural role and the attachment layout, which streamlines planning. For projects that call for a matte black, adjustable steel support with known capacity, this leg offers a defined set of characteristics ready to be integrated into your next work surface or table build.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CM624-7S-C1 Mfr# 624-7S-C1 | Steel Table Legs Polished Chrome Adjustable 27-3/4 in | ||||
Sold in: 1 Each | CM624-7S-ST Mfr# 624-7S-ST | Isola steel table leg brushed chrome 27-3/4 in |