Isola steel table leg brushed chrome 27-3/4 in

Isola Steel Table Leg For Strong Work Surfaces

Isola steel table leg from Camar is a single table leg designed to support work surfaces and tables where a sturdy point load is needed. The leg is part of Peter Meier's Isola Series, so it matches that line for coordinated projects. Each leg has a 3 inch diameter, which spreads load across a wider footprint and helps reduce flex on heavier tops. The standard 27-3/4 inch length sets a typical table-height work surface when used under a suitable top. The leg is rated for a load bearing capacity of 330 lb per leg, so it handles substantial worktops or concentrated loads in workshop, office, or residential setups. The brushed chrome finish provides a neutral metallic look that blends with many hardware and appliance finishes.

Key Isola Table Leg Details For Real Jobs

• This single table leg has a 3 inch diameter, giving a broad, stable support column that resists wobble under typical work surface loads.
• The 27-3/4 inch long leg height works for standard table applications, so tops reach comfortable working level without custom fabrication.
• A welded mounting plate is permanently attached to the leg extension, creating a solid connection point that does not shift under load.
• The mounting plate has a 6 inch diameter, spreading the connection area and helping distribute stress across more of the underside of the top.
• Four screw holes in the mounting plate give defined fixing points, allowing consistent attachment patterns and repeatable installation layouts.
• The leg can be extended by 9 inches by rotating the top of the leg, letting installers set higher surfaces within the built-in adjustment range.

Installation Height And Mounting Plate Setup

This Camar Isola table leg uses a welded mounting plate on the leg extension, so installers work with one integrated component instead of loose separate parts. The 6 inch diameter plate sits against the underside of the work surface, giving a wide bearing area. Four screw holes in the plate define where fasteners engage the substrate, which simplifies layout when repeating legs along a run. With a base length of 27-3/4 inches that can be extended by 9 inches by rotating the top of the leg, the usable height range covers standard table heights and taller applications that need extra clearance. The 3 inch diameter steel tube adds lateral stability once anchored to a suitable top.

Using This 330 Lb Isola Table Leg In Projects

Where This Single Steel Table Leg Fits Best

This Isola Series steel table leg is built as a single support element for work surfaces and tables where independent legs are preferred over full bases. The 27-3/4 inch table-height design targets standard seating and desk applications, while the ability to extend the leg by 9 inches by rotating the top supports higher counters within that adjustment range. The 330 lb per leg load bearing capacity lets one leg contribute significant support under a corner, peninsula, or freestanding section when paired with additional structure. With a 3 inch diameter shaft and a 6 inch diameter mounting plate, the leg suits thicker tops that benefit from a broad mounting footprint and a substantial visual profile.

Details That Help Repeatable Mounting And Alignment

The welded connection between the mounting plate and the leg extension keeps the assembly rigid, so the plate-to-leg relationship stays fixed while positioning the leg under a top. Four screw holes on the 6 inch plate give clear locations for fasteners, which supports uniform spacing from project to project. Because height adjustment is handled by rotating the top of the leg to extend it up to 9 inches, installers can fine-tune finished height without altering the primary mounting. The 3 inch diameter leg helps maintain vertical alignment and reduces deflection when the 330 lb per leg capacity is utilized. The brushed chrome finish ties visually to other brushed chrome components in the space, helping projects that use coordinated metal finishes across hardware and visible supports.

Common Questions About This Isola Table Leg

Selecting This Brushed Chrome Isola Table Leg

Choose this 3 inch diameter x 27-3/4 inch high Isola single table leg when a steel support with defined capacity and integrated mounting is required. The 330 lb per leg load rating, welded 6 inch diameter plate with four screw holes, and 9 inch extension adjustment by rotating the top give a straightforward way to support and level work surfaces. The brushed chrome finish from Peter Meier's Isola Series ties the leg to other matching components on the project, keeping both structure and appearance aligned around a known part number, 624-7S-ST.