Steel Table Legs Polished Chrome Adjustable 27-3/4 in

Steel Table Legs For Adjustable Work Surfaces

Steel table legs from Camar in the Isola Series provide a load bearing capacity of 330 lb per leg, so a single leg supports substantial work surface loads where a stout support is needed under tables or workstations. The leg has a 3 inch diameter, giving a broad steel footprint that spreads weight and feels solid when used under heavier tops. The leg comes in a 27-3/4 inch long table height, which fits standard table applications where a conventional sitting-height surface is required. A polished chrome finish gives a bright metal appearance that suits projects calling for exposed metal supports. The leg extends by 9 inches by rotating the top of the leg, allowing significant height change using the built-in threaded adjustment rather than separate shims. This adjustable range supports applications that move from lower table height toward taller counter-style installations using the same leg.

Key Isola Series Details That Drive Performance

• The load bearing capacity of 330 lb per leg supports substantial table tops, allowing confident use under dense work surfaces or heavier assemblies without overloading a single support point.
• The 3 inch diameter steel leg distributes vertical loads across a wider tube, which reduces point pressure and contributes to a more rigid feel along the length of the support.
• The 27-3/4 inch table height length targets standard table applications, helping achieve a typical working height when used with common top thicknesses in shop or office environments.
• The ability to extend the leg by 9 inches by rotating the top adds built-in height flexibility, reducing the need for separate leg sets when a range between table and higher surface levels is desired.
• The welded mounting plate with a 6 inch diameter and four screw holes offers a broad attachment surface, helping spread forces into the underside of the top at four fastener points for stable mounting.
• The polished chrome finish supplies a reflective metallic look that matches designs where the leg remains visible beneath tables, supporting a clean appearance alongside metal hardware or fixtures.

Mounting And Height Adjustment For Camar Steel Legs

The mounting plate is welded to the leg extension, creating a fixed steel connection that eliminates separate brackets at the joint and supports consistent alignment from plate to floor. The plate diameter of 6 inches provides a larger contact circle at the top of the leg, which helps distribute forces into the underside of the work surface. Four screw holes in the mounting plate give defined fastening points, allowing the leg to be secured at four locations around the plate. The leg extends by 9 inches by rotating the top of the leg, using an internal mechanism that changes overall length while the base remains in place, so height changes happen from above the leg. This rotation-based adjustment allows fine tuning of table height within the extension range during layout and installation.

Using Camar Isola Legs In Work Surface Builds

Where These Adjustable Steel Table Legs Fit

The Isola Series from Peter Meier is described as a premium line of steel table legs, so this leg is suited to projects where a finished metal support is part of the overall table or work surface design. With a 27-3/4 inch long table height, the leg works in standard-height table builds where the top thickness plus leg length combine for a typical seated working position. The ability to extend the leg by 9 inches by rotating the top opens up applications that need higher surfaces within that range, such as elevated work tables that share components with lower tables. The 3 inch diameter tube provides a visual and structural presence appropriate for work surfaces, desks, or tables that carry moderate to heavy loads. A polished chrome finish supports use in visible locations like offices, meeting areas, or shop spaces where metal legs remain exposed. The load bearing capacity of 330 lb per leg supports heavy tops when multiple legs are used, enabling layouts with dense materials or equipment positioned on the surface.

Details That Support Consistent Mounting Results

The welded mounting plate simplifies leg positioning because the plate and leg extension are a single steel piece, which keeps the leg axis fixed relative to the screw pattern. A 6 inch diameter plate offers a wide footprint on the underside of the table, supporting stable mounting when positioned near corners or along rails. Four screw holes provide a clear pattern for mechanical fastening, which helps resist rotation or racking forces at the top of the leg during normal use. The 9 inch extension, controlled by rotating the top of the leg, lets the installer set the final working height by turning from the top side rather than moving the foot, which is helpful when the lower end is close to the floor. The combination of defined plate size, screw locations, and adjustable extension length supports repeatable results across multiple legs on the same surface, helping maintain even height and stable support from one corner to another in a table or work surface build.

Common Questions About Camar Isola Series Legs

Select This Adjustable Leg For Your Next Table Build

The Camar Isola steel table leg with polished chrome finish combines a 3 inch diameter tube, 27-3/4 inch table height, and 9 inches of extension by rotating the top, so one component handles a broad height range. A 6 inch diameter welded mounting plate with four screw holes supplies a defined connection for securing the leg to work surfaces or tables. With a load bearing capacity of 330 lb per leg, this model fits projects where substantial tops need dependable vertical support. For work surfaces, tables, or desks requiring visible metal legs and adjustable height within the specified range, this Isola Series leg provides a focused solution.