Salice Series F Thick Door Hinge For Overlay

Salice Series F thick door hinge is a concealed cabinet hinge designed for profile and thicker doors, so it handles jobs where standard hinges do not give enough range. This hinge is specified for doors up to 40 mm, which covers many thicker fronts used in modern cabinetry. The hinge allows large overlays up to 1 3/8 inch, giving flexibility when setting reveals on overlay pocket doors or cabinets with wide face frames. A 94 degree opening angle keeps the door swing controlled while still giving access to the interior. The hinge design supports both inset overlay face-frame and frameless applications, so a single part number can be used across different cabinet constructions. The nickel finish on this hinge gives a consistent look with other Salice hardware in the run.

Key Salice Hinge Details That Aid Layout

• Series F hinges for profile and thicker doors are described as the perfect solution for overlay pocket doors, so they address projects where the door must overlay while sliding back into a pocket.
• Use on doors up to 40 mm lets this hinge cover thicker door designs, which helps when specifying heavy fronts or applied panels without changing hinge families.
• Large overlays possible up to 1 3/8 inch allow generous coverage of the cabinet front, giving flexibility in face-frame or frameless overlay layouts.
• A 94 degree opening angle provides a controlled door swing, which is useful where adjacent cabinets or walls sit close to the hinge side.
• A cup depth of only 13 mm helps when there is limited material in the door, preserving strength in thinner rail sections behind the hinge bore.
• The hinge cup edge drilling distance of 3 mm to 15 mm supports different reveal plans, so boring distance can be tuned to the overlay requirement.

Hinge Mounting, Adjustment, And System Fit

This Salice European thick door hinge uses a screw-on connection, which anchors the hinge reliably to the door and mounting plate. The hinge has patented parallel side-to-side adjustment of plus 5.5 mm to minus 0.5 mm via a hinge arm screw, so the door can be shifted horizontally without disturbing the cup bore. That parallel adjustment lets doors be lined up across a bank of cabinets while keeping reveals consistent from top to bottom. Series F hinges are designed to work with all Salice mounting plates, which means door and frame geometry can be set using the mounting plate style already used in the shop. Series F hinges are compatible with Smove soft-close devices, allowing soft-closing action to be added within the same system when desired.

Using This CFA5P99 Hinge In Cabinet Projects

Where This Salice Thick Door Hinge Performs

The manufacturer part CFA5P99 identifies this hinge as a Series F thick door model, so it slots into Salice projects where profile or thicker doors are already specified. Because it is positioned for overlay pocket doors, it suits cabinets where the door overlays the opening and still needs room to retract. The ability to handle large overlays up to 1 3/8 inch means it works well in face-frame runs where stiles are wide and overlays need to hide more frame. The hinge classed as a concealed cabinet hinge keeps the hardware out of sight when the door is closed, which is often required in higher-end casework. Its nickel finish sits comfortably next to other nickel-plated hinges and plates used across a kitchen or commercial install.

Why These Salice Details Support Repeatable Results

The cup depth of only 13 mm allows boring without taking excessive material from the door, which helps keep screw holding strength and stability over time. The hinge cup edge drilling distance range of 3 mm to 15 mm gives room to standardize boring while still fine-tuning overlays, so jigs can stay consistent between jobs. Patented parallel side-to-side adjustment from plus 5.5 mm to minus 0.5 mm via the hinge arm screw keeps the door moving parallel to the cabinet edge during adjustment, avoiding twist that can open up uneven gaps. Because Series F hinges are designed to work with all Salice mounting plates, the same hinge body can be used on both face-frame and frameless cases by selecting the appropriate plate height. Compatibility with Smove soft-close devices means closing speed and damping can be added using components from the same Salice system. The fact that the hinge exceeds ANSI/BHMA grade 2 standards and is ISO 9001 and ISO 14001 certified indicates that it is produced under documented quality and environmental management systems that support consistent output.

Common Questions About This Salice Series F Hinge

Selecting This Hinge For Thick Door Work

The Salice thick door hinge CFA5P99 combines a 13 mm cup depth, large overlay capacity up to 1 3/8 inch, and door use up to 40 mm, so it suits many thicker-door layouts. With parallel side-to-side adjustment and compatibility across Salice mounting plates, it fits easily into existing Salice-based casework programs. Add its 94 degree opening angle and concealed European hinge format, and this hinge provides a focused option when specifying overlay pocket doors or other thicker fronts. Use this hinge when a Series F thick door solution is required to keep your Salice system consistent from cabinet to cabinet.