
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson American Classic pull is a zinc die cast cabinet handle in the American Classics collection, so it provides a consistent style match on projects using that series. The finish is Weathered Copper, which gives cabinet and drawer fronts a worn-in copper look that works well in traditional or rustic designs. The pull has a 3 inch center to center dimension, so the drilled hole spacing is straightforward for standard 3 inch layouts. Overall length is 3-11/16 inches, giving some finger clearance beyond the hole spread for comfortable gripping. Projection is 1-1/4 inches, which positions the hand away from the door or drawer face, helping reduce knuckle contact. A base diameter of 5/8 inch offers a defined footprint against the surface, which helps visually cover the bore area. Width is 3/8 inch, keeping the profile slim where space or tight drawer spacing matters.
The center to center measurement of 3 inches defines the mounting hole spacing, which sets the drilling or template layout for both new and retrofit work. An overall length of 3-11/16 inches means the ends extend beyond the bore points, helping cover slight drilling variances while still aligning with a standard 3 inch pattern. The pull uses 8-32 x 1 inch screws, so it matches a common machine screw thread used in cabinet doors and drawer fronts. A projection of 1-1/4 inches positions the gripping surface off the face, giving working room for fingers when mounted on doors of typical thickness. With a base diameter of 5/8 inch, the contact point against the wood or panel creates a defined bearing surface that pairs well with standard cabinet construction.
This pull is part of the American Classics collection, so it fits projects that are already using or specifying that Berenson series across a kitchen, bath, or built-in. The 3 inch center to center dimension makes it suitable for cabinet doors and drawers drilled on a standard 3 inch pattern, which is common in residential cabinetry. Its Weathered Copper finish supports designs that call for an aged, darker copper tone on face frames and door fronts. Because the overall length is 3-11/16 inches, it works well on medium-width drawer fronts, giving enough handle span without overwhelming narrower faces. The 1-1/4 inch projection aids use on doors near adjacent walls or appliances, keeping fingers clear of surrounding surfaces when opening.
The zinc die cast construction gives each pull a consistent shape from piece to piece, which supports clean alignment along cabinet runs where small variances would stand out. The 3 inch center to center measurement allows installers to rely on familiar drilling jigs, which reduces layout time when handling multiple doors and drawers. A 5/8 inch base diameter helps visually mask the edges of the drilled holes, which is useful when replacing older hardware where the original bores may show slight wear. The 3/8 inch width keeps the profile slim, allowing multiple pulls on adjacent drawers to sit close without looking bulky. The 1-1/4 inch projection combines with the overall 3-11/16 inch length to offer a comfortable grip area, which is important on frequently accessed storage. The Weathered Copper finish maintains the American Classics collection appearance from piece to piece, supporting a uniform look across a full installation.
The Berenson American Classic pull has a 3 inch center to center dimension, which sets the distance between mounting holes and matches standard 3 inch cabinet drilling.
The pull length is 3-11/16 inches and the width is 3/8 inch, so it spans slightly beyond the hole spacing while keeping a slim profile on cabinet fronts.
The pull projection is 1-1/4 inches, creating space between the handle and cabinet face so fingers can comfortably grip without rubbing the surface.
The pull is zinc die cast with a Weathered Copper finish, giving a solid metal body and an aged copper appearance for traditional or rustic cabinet projects.
This pull uses 8-32 x 1 inch screws, matching a common cabinet hardware thread and length used on many doors and drawer fronts.
The 5/8 inch base diameter creates a defined contact area at each end of the pull, helping cover the drilled holes and giving a finished look on the surface.
The Berenson American Classic Series 3 inch center to center Weathered Copper pull brings a zinc die cast construction, American Classics styling, and standard 3 inch mounting into one hardware choice. The 3-11/16 inch overall length, 1-1/4 inch projection, and 5/8 inch base diameter support both grip comfort and clean coverage around the bores. For projects calling for a Weathered Copper finish in a familiar 3 inch layout, this 9889-1WC-P pull offers dimensions and detailing that align with typical cabinet and drawer applications.
Sold In: 1 Each