Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPWRL2430-M to RSWRL2430-M.
Omega National maple wine bottle storage x 30"W x 24"H, 18 openings unfinished - WRL2430MA provides a 24 inch tall by 30 inch wide lattice panel that organizes up to 18 bottles in a consistent grid, which helps installers create uniform wine storage layouts in upper or tall cabinets. The unfinished maple construction gives a bare wood surface, so shops can stain or finish this rack to match surrounding cabinetry and trim schedules without working against a factory-applied coating. The lattice design is part of Omega Nationals wine bottle and stemware storage class, so it is sized and proportioned specifically for wine bottle presentation instead of general shelving. The WRL2430MA part number identifies this 24 inch by 30 inch, 18 opening configuration, which simplifies ordering and reordering the exact layout used on multi-cabinet runs.
The WRL2430MA lattice rack uses a 24 inch tall by 30 inch wide layout with 18 openings, so cabinet builders can design openings slightly larger than this footprint and then fit the panel inside face frames or frameless interiors with planned reveals. Because the panel is easily trimmed to desired size, shops can cut the outer edges of the mouldings to fine-tune width and height, which helps align the lattice pattern to door openings or adjacent components without redesigning the storage concept. The 3/4 inch by 7/16 inch mouldings with radiused edges keep cut edges manageable during trimming and finishing, since the consistent profile lets fabricators maintain the same visual detail after sizing.
This Omega National maple wine bottle storage x 30"W x 24"H, 18 openings unfinished - WRL2430MA panel is part of a family of panels available in four sizes: 17 inches wide x 29 inches tall with 11 bottle openings, 17 inches tall x 36 inches wide with 14 bottle openings, 24 inches tall x 30 inches wide with 18 bottle openings, and 24 inches x 43 inches with 28 bottle openings. This range lets designers select the 24 inch by 30 inch option where a moderate bottle count is needed in a standard cabinet width, while coordinating with other panel sizes in wider or taller sections. The product sits in the kitchen and bath cabinet accessories category under wine bottle racks, so it supports dedicated wine storage zones in kitchen, bar, or pantry cabinetry using a familiar cabinet workflow.
All joints in the WRL2430MA panel are glue and mechanically fastened, creating a rigid lattice that holds its square during handling and trimming, which helps maintain even diagonals and consistent bottle openings after installation. The mouldings measure 3/4 inch by 7/16 inch with radiused edges, so each crossing point presents a uniform face for finishing and reduces hard corners where wear can show around frequently handled bottles. The unfinished maple species gives a neutral, fine-grain hardwood surface that accepts various stains and clear finishes, which helps shops align the wine rack appearance with custom cabinet door styles and interior finishes. Because the panel is easily trimmed to desired size, fabricators can cut to exact cabinet interiors, allowing the mechanically fastened joints to keep the pattern intact even after sizing adjustments.
The WRL2430MA lattice rack is specified as 24 inches tall by 30 inches wide, which helps cabinet planners match openings and design face frames or frameless interiors around that footprint.
This Omega National maple wine bottle storage panel has 18 openings, so designers can plan for up to 18 individual bottle positions within one 24 by 30 inch section.
The WRL2430MA wine bottle storage panel is easily trimmed to desired size, allowing shops to cut height or width to match specific cabinet interior dimensions or design reveals.
This rack is described as maple wine bottle storage unfinished, so the lattice is maple and arrives without a factory-applied finish, ready for shop finishing to match cabinetry.
The WRL2430MA lattice uses mouldings with all joints glue and mechanically fastened, creating a stable assembly that holds its grid pattern when handled, trimmed, and installed.
The 3/4 inch by 7/16 inch mouldings with radiused edges define each bottle opening profile, supporting bottles while providing smoother edges that accept stain or clear finishes cleanly.
The Omega National maple wine bottle storage x 30"W x 24"H, 18 openings unfinished - WRL2430MA offers a defined 24 inch by 30 inch lattice layout that fits planned cabinet openings. With unfinished maple, glue and mechanically fastened joints, and easily trimmed edges, this panel supports custom finishing and sizing while preserving a consistent 18 opening pattern. For projects that call for coordinated wine bottle racks across several cabinets, this WRL2430MA configuration provides a repeatable part number and geometry to build around.
Sold In: 1 Pair
