Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPWRL2443-C to RSWRL2443-C.
Omega National cherry wine bottle storage x 43"W x 24"H, 28 openings unfinished - WRL2443CH provides a dedicated wine bottle storage panel sized for 24" height and 43" width, so cabinet layouts can be planned around a known footprint. The lattice rack design delivers 28 openings, which organizes individual bottles in a repeatable grid, helpful when planning capacity and spacing in a cabinet run. The panel is supplied unfinished cherry, allowing finishing to match surrounding cabinetry systems built from cherry stock. All joints are glue and mechanically fastened, creating a unified panel that handles normal handling and installation stresses as a single rigid assembly. Mouldings measure 3/4" x 7/16" wide with radiused edges, giving each opening a defined border that presents bottles consistently and reduces sharp profile transitions around the lattice. Panels are boxed in 2 piece sets (front and back), forming matched faces for through-cabinet wine storage applications.
The 24" x 43" lattice rack panel is easily trimmed to desired size, allowing installers to adjust the panel to an exact cabinet opening rather than building the cabinet strictly around the stock dimensions. This trim-to-size flexibility lets fabricators fine-tune clearances where face frames, end panels, or reveals vary slightly from nominal. Because the joints are glue and mechanically fastened, the lattice maintains integrity when edges are cut back within normal layout limits, supporting clean edges after trimming. The 3/4" x 7/16" mouldings with radiused edges present consistent material around the perimeter, so trimmed edges still align visually with the interior grid. With unfinished cherry, any freshly cut edges can be finished at the same time as the rest of the panel for a uniform look at the final fit.
This Omega National cherry wine bottle storage x 43"W x 24"H panel fits naturally into tall upper or base cabinet sections where a 24" high opening exists, giving designers a defined wine storage zone within a cabinet layout. The 28 openings create a regular matrix, which works well in bar cabinets, pantry sections, or kitchen uppers where bottles are stored horizontally in a visible grid. As part of Omega National Products wine bottle and stemware storage offerings, this panel can be specified alongside other wine bottle racks to build coordinated storage areas across multiple cabinets. The cherry, hickory, maple, and red oak options in the line allow this cherry version to be used where the surrounding cabinetry is cherry, while maintaining consistency with projects that might use other species in different zones.
The WRL2443CH lattice rack uses glue and mechanically fastened joints, which creates repeatable squareness and alignment from panel to panel for predictable fits in production work. The 24" x 43" dimension is clearly defined, so cut lists and cabinet drawings can reference a known size when designing openings, face frames, and supports. With mouldings at 3/4" x 7/16" and radiused edges, each intersection presents the same profile, which keeps the visual pattern consistent even when panels are trimmed and installed in different cabinets on the same job. The ability to easily trim to desired size helps reduce rework when field conditions differ slightly from drawings, because the same panel can be scribed or shortened rather than rebuilt. The unfinished cherry surface also supports finishing runs where multiple components pass through the same process, helping maintain an even appearance across doors, frames, and wine storage panels.
The WRL2443CH lattice rack is 24 inches tall by 43 inches wide, which sets the base opening size for planning cabinet spaces around the wine storage panel.
This Omega National cherry wine bottle storage panel has 28 openings, so cabinet designs can allocate space based on a known bottle capacity per panel.
The 24 x 43 wine bottle rack panel is easily trimmed to desired size, allowing installers to adapt it to actual cabinet openings while retaining the lattice layout.
This product is an unfinished cherry wine bottle storage panel, which allows the surface to be stained or coated to coordinate with surrounding cherry cabinetry systems.
The wine bottle rack uses glue and mechanically fastened joints, giving the lattice a stable structure that handles typical handling during installation.
The panel uses 3/4 inch by 7/16 inch mouldings with radiused edges, producing a consistent softened profile around each opening within the lattice grid.
The Omega National cherry wine bottle storage x 43"W x 24"H, 28 openings unfinished - WRL2443CH provides a defined 24" x 43" lattice panel, supporting straightforward cabinet design and field trimming. With unfinished cherry construction, glue and mechanically fastened joints, and 3/4" x 7/16" mouldings with radiused edges, this wine bottle rack suits projects that need coordinated cherry cabinetry and predictable bottle capacity. Specify this 28-opening panel when a tall cabinet section requires organized wine storage built from a known-size lattice rack.
Sold In: 1 Pair
