
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NP1WRL1736AL to RS1WRL1736AL.
Omega National alder wine rack lattice provides a 17 inch tall by 36 inch wide unfinished panel that organizes wine bottles in a clean, repeatable grid, which helps cabinet builders integrate dedicated wine storage into upper or base cabinetry layouts. The panel is designed with 14 bottle openings, so capacity stays predictable when planning cabinet sections or balancing multiple racks across a run. All joints are glue and mechanically fastened, creating a rigid lattice structure that holds alignment during handling and installation in shop or on site. The mouldings are 3/4 inch by 7/16 inch wide with radiused edges, giving each opening a consistent profile that presents bottles evenly while keeping edge transitions smooth for finishing. The unfinished alder construction lets finishers match the rack to surrounding casework or trim systems using their standard stain and topcoat schedule.
The WRL1736AL 17 inch tall by 36 inch wide panel is designed as a lattice that can be trimmed, allowing shops to start from a predictable grid and then cut to final dimension for the specific cabinet opening. Because all joints are glue and mechanically fastened, the lattice retains its structure while edges are cut, which helps keep bottle openings square and aligned after fitting. The 3/4 inch by 7/16 inch mouldings with radiused edges give a consistent perimeter thickness, so the installer can reference these edges when setting reveals to adjacent face frames or interior dividers. The panel style supports insertion into cabinet carcasses or framed openings as a single, coherent component, which streamlines positioning and fastening steps in production or onsite installation.
The 17 inch tall by 36 inch wide lattice panel with 14 bottle openings fits naturally in cabinet sections built around that span, allowing designers to dedicate a full-width bay to wine storage instead of smaller segmented cubbies. As part of a series that also offers 17 inch by 29 inch, 24 inch by 30 inch, and 24 inch by 43 inch panels, this size works as the wider, low-height option when planning staggered banks of wine storage above counters or within tall cabinets. The unfinished alder construction matches projects that specify alder casework, so the rack can be finished along with cabinet doors, frames, and panels for a unified appearance. Because panels are sold in pairs, with front and back pieces, fabricators can create a through-lattice look that reads consistently from both sides of an open cabinet bay or pass-through opening.
Omega National wine bottle storage panels rely on all joints being glue and mechanically fastened, which keeps the lattice from racking as it is moved between the finishing area and cabinet assembly, supporting consistent alignment of the 14 openings in each unit. The 3/4 inch by 7/16 inch mouldings with radiused edges define every bottle opening with the same edge thickness and curve, which simplifies sanding and finishing passes and leads to uniform shadow lines when bottles are in place. The easily trimmed design means fabricators can start with a standard WRL1736AL panel and cut to final size after measuring completed cabinet interiors, reducing layout sensitivity to small casework variances. Working within a family of four panel sizes also lets shops repeat the same construction approach while scaling capacity, which streamlines jigs, finishing schedules, and installation routines across multiple jobs.
The WRL1736AL wine rack lattice panel measures 17 inches tall by 36 inches wide, so it suits cabinet openings planned around that width and allows a low-height wine storage section.
This 17 inch tall by 36 inch wide alder rack provides 14 bottle openings, giving a predictable bottle count when designing cabinet runs or grouping multiple panels together.
Omega National wine bottle storage panels are available in four unfinished species - cherry, hickory, maple, and red oak - supporting alignment with different cabinet wood programs.
The WRL1736AL lattice uses joints that are glue and mechanically fastened, providing a rigid structure that maintains bottle opening alignment during trimming and installation.
The wine rack lattice panels are easily trimmed to the desired size, allowing fabricators to fine-tune the panel to actual cabinet interior dimensions.
The lattice uses 3/4 inch by 7/16 inch mouldings with radiused edges, giving each opening a uniform frame that simplifies sanding and finishing work.
The WRL1736AL Omega National alder wine rack lattice combines a 17 inch by 36 inch panel, 14 bottle openings, and glue plus mechanically fastened joints to support stable, trim-to-fit wine storage in cabinet projects. The unfinished alder surface and 3/4 inch by 7/16 inch radiused mouldings allow shops to integrate this panel into their standard finishing and assembly workflow. For projects calling for coordinated bottle storage across several cabinet sections, this panel works alongside the other available lattice sizes to create a consistent look and predictable capacity. Choose this model when a wide, low-height lattice panel aligns with your cabinet design and finishing schedule.
Sold In: 1 Pair