Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Grass 6.3-13mm Flat Head Euro Screw is a nickel-finish cabinet fastener engineered for the 32mm line-bore system. With a flat head, coarse thread, blunt point, and #2 Phillips drive, it seats European cup hinges, drawer slides, and other cabinet hardware into pre-bored 5mm line-bore holes with consistency across full production runs.
The 13mm length is the standard choice for mounting hardware to 3/4-inch (19mm) cabinet panels. It provides enough thread engagement to hold hinge and slide mounting plates firmly without the tip approaching the panel's opposite face. For shops running a consistent panel thickness, this length keeps installation predictable and eliminates the guesswork of mixed-length fasteners across a production run. It is the length most commonly called out by European hardware manufacturers for standard carcass work.
The nickel finish gives the screw head a neutral, low-contrast appearance against most European-style hinge plates and slide brackets, so hardware looks clean and intentional after installation. The coarse thread engages the wood fiber and composite material surrounding a pre-bored hole without requiring high driving torque, which helps protect the hole wall in particleboard and MDF panels. The flat head seats flush against the hardware mounting plate, distributing clamping load evenly and preventing the head from rocking under the plate edge.
Cabinet shops running frameless or face-frame production with European hardware depend on a reliable supply of correctly sized euro screws. Installers setting hinges and drawer slides in the field use the same standard. The 500-piece box supports both environments, providing enough volume for a multi-cabinet run without requiring a bulk pallet. Designers specifying Grass hardware or any 32mm-system fitting can call out the 81015-43 to ensure the fastener matches the hardware's intended mounting geometry.
It is intended for European cup hinges, drawer slides, and other cabinet hardware that mounts into 5mm line-bore holes in the 32mm system. The 6.3mm shank and 13mm length are sized for standard mounting plates on 3/4-inch panels.
Yes. The blunt point is designed for pre-bored holes, not for driving into undrilled material. Install it into an existing line-bore or mounting-plate hole.
Yes. The coarse thread engages the fiber structure of particleboard and MDF effectively when driven into a correctly sized pre-bored hole.
The nickel finish provides a consistent, low-contrast head appearance that blends with most European hardware mounting plates. It also offers standard indoor corrosion resistance appropriate for cabinet interiors.
Each box contains 500 screws.
A correctly sized euro screw is easy to overlook until an undersized one strips out or an oversized one splits the panel edge. The Grass 81015-43 is spec'd to the 32mm system, so the hardware seats the way it was designed to seat, and the installation holds.
Sold In: 500 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 500 Each |  GF83001K Mfr# 83001-43 | Grass 6.3-7.5mm Flat Head Euro Screw Phillips Drive - Blunt Point Coarse Thread Nickel, 83001-43 - 500/Box | ||||
Sold in: 500 Each | GF83000K Mfr# 83000-43 | Grass 6.3-18mm Flat Head Euro Screw Phillips Drive - Blunt Point Coarse Thread Nickel, 83000-43 - 500/Box |