Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Grass 6.3-18mm Flat Head Euro Screw is a coarse-thread cabinet assembly fastener sized for the 32mm system. Its 18mm length gives it deeper engagement in thicker panel stock, making it the right choice when standard shorter euro screws leave too little thread in the material.
Most euro screw applications call for a short fastener because cabinet panels are thin and the hardware plate sits close to the surface. The 18mm length steps in when the panel is thicker, when a line-bored hole runs deeper, or when the hardware mounting plate has more material between the screw head and the threaded portion of the hole. In those situations, a 13mm or shorter euro screw bottoms out before the head seats, leaving the plate loose. The extra length here threads fully through and pulls the plate tight. It also suits shops that standardize on one euro screw length across mixed panel thicknesses to reduce bin changes during production runs.
The coarse thread on this screw is engineered for the fiber-matrix materials that dominate cabinet construction: particleboard, MDF, and melamine-laminated panels. The wider thread pitch displaces and grips the soft core material, resisting pull-out without crumbling the panel around the hole. The blunt point requires a pre-drilled pilot, which is standard practice in 32mm system cabinetry where line-bored holes are laid out before any hardware goes in. That pre-bored approach keeps hole placement consistent and protects panel edges from the stress a self-starting point would introduce. The flat head countersinks into the pre-bored step, finishing flush with or slightly below the panel face once fully driven.
Cabinet shops running European frameless construction are the core user for this fastener. The 32mm line-boring system depends on consistent hardware placement, and euro screws are the fastener that locks hinge plates, drawer slide brackets, and shelf hardware into those pre-bored positions. The 18mm length fits production environments where panel thickness varies across a job, or where a shop has standardized on a single longer euro screw to eliminate the need to swap bins mid-run. Installers doing field work on frameless cabinets will also reach for this length when replacing or adding hardware to thicker case panels on-site. The 500-piece box suits both shop stock and a full installation kit without the waste of a larger bulk quantity.
A euro screw must thread fully through the pilot hole and seat its head in the countersink. If the screw is too short for the panel, the threads don't reach enough material to hold, and the head can't pull the hardware plate tight. The 18mm length provides additional engagement depth for thicker panels where a 13mm screw would bottom out before seating.
No. The blunt point on this screw is designed for pre-bored pilot holes, which is the standard in 32mm system cabinetry. Driving it into undrilled material will not work and risks splitting the panel edge.
Euro screws like this one are used to mount European cup hinge plates, drawer slide mounting brackets, and other 32mm system hardware to cabinet side panels and face frames. The 6.3mm diameter matches the standard pilot hole for this class of fastener.
Yes. The drive recess accepts a standard #2 Phillips bit, which most installers already carry. No specialty bit is required.
The nickel finish is primarily cosmetic. It gives the screw head a light metallic appearance that blends with nickel-toned hardware mounting plates and light cabinet interiors. For indoor cabinet assembly in a controlled environment, it provides adequate protection for the application.
When thicker panels are in the mix, the 18mm length keeps euro screw installation predictable: full thread engagement, a seated head, and hardware that stays put through the life of the cabinet.
Sold In: 500 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 500 Each |  GF83001K Mfr# 83001-43 | Grass 6.3-7.5mm Flat Head Euro Screw Phillips Drive - Blunt Point Coarse Thread Nickel, 83001-43 - 500/Box | ||||
Sold in: 500 Each | GF81015K Mfr# 81015-43 | Grass 6.3-13mm Flat Head Euro Screw Phillips Drive - Blunt Point Coarse Thread Nickel, 81015-43 - 500/Box |