
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Lavi stainless steel post bracket gives you a flush center post solution for 1-1/2 inch bar or foot railing, so you can support straight runs with a clean, aligned look. The bracket is part of Lavi Industries bar and foot railing and accessories line, so it integrates into bar rail builds that follow the same system. The flush center post design supports rails between other fittings, which helps control deflection on longer straight sections. Being a dedicated post bracket helps standardize layout from post to post, which matters when you want consistent spacing along a commercial or residential bar front.
The bracket is identified by manufacturer part number 44-342/1H, which ties this piece to matching Lavi components using the same numbering. That clear ID helps installers reorder or match existing installations without trial and error during replacements or expansions.
This flush center post bracket is configured for 1-1/2 inch railing, so spacing and drilling can be planned around that tube diameter for predictable alignment along the bar face. The satin stainless steel finish ties visually to other satin stainless components in the same area, helping keep the appearance consistent across multiple brackets and fittings. Because it is a center post style, the rail sits in line with the support, which simplifies measuring straight runs, marking positions on the bar base, and keeping foot rails parallel to the floor. The 304 stainless steel material resists staining in normal bar conditions, so the bracket maintains its look when exposed to spills and routine wipe-downs during service.
This Lavi stainless steel post bracket fits into bar and foot railing and accessories projects that use 1-1/2 inch rail, so it becomes the vertical support between elbows, end caps, or wall returns in those systems. As a flush center post, it is suited to straight sections where the rail should appear to pass cleanly through supports without offset joints. The satin stainless steel finish lets it blend with stainless rails at the front of bars, service counters, or reception areas where a consistent brushed metal look is preferred. Because the bracket uses 304 stainless steel, it holds up in busy bar interiors where moisture and cleaning agents are part of daily operation.
Using a matching Lavi Industries bracket with part number 44-342/1H helps installers keep all supports in the run within the same product family, which maintains uniform geometry along the rail. The 1-1/2 inch sizing means it can be laid out at repeating intervals along the base structure, and that predictability simplifies cutting rail sections to length while keeping joints centered over the posts.
The flush center post layout keeps the rail axis directly over the support, which reduces visual waviness and helps keep loads transferred straight down to the mounting surface across the entire bar length. That alignment is important when setting multiple brackets at a uniform height for a foot rail, because it keeps the tube parallel to the floor and comfortable to use. The satin stainless steel finish hides minor scuffs better than a polished surface, so the brackets keep a uniform appearance in high-traffic bar fronts that see shoes and cleaning tools near the rail.
The 304 stainless steel construction reduces concerns about rust marks on finished millwork in typical interior bar settings, so it protects the look of cabinetry and wall finishes adjacent to the rail. Clear identification as manufacturer part number 44-342/1H lets shops document the exact bracket used on drawings or job files, which supports straightforward future additions when a bar or counter is extended. Being sold in each quantities also lets installers fine-tune bracket counts when layouts change on site without overcommitting to excess components.
This Lavi stainless steel post bracket is configured for 1-1/2 inch railing, which lets installers pair it with rail tubing in that diameter for consistent alignment.
The flush center post design holds the rail in line with the support, helping straight bar or foot rails look continuous while distributing loads directly over the posts.
The 44-342/1H bracket is made of 304 stainless steel, which provides corrosion resistance suited to indoor bar, restaurant, and hospitality rail installations.
This bar and foot railing bracket has a satin stainless steel finish, which delivers a brushed look that coordinates with similar stainless rail components.
Within Lavi Industries systems, this product is identified by manufacturer part number 44-342/1H, which ties it to matching bar and foot railing pieces.
This post bracket is used in bar and foot railing and accessories projects, supporting 1-1/2 inch rails along bars, counters, and similar interior fronts.
This Lavi stainless steel post bracket in satin stainless steel gives installers a defined solution for 1-1/2 inch flush center posts on bar and foot railing projects. With 304 stainless steel construction and the 44-342/1H part number, it fits directly into Lavi Industries bar and foot railing and accessories systems that use this size. Ordering it in each units lets shops and contractors match bracket counts to their rail layouts, whether building a new bar front or extending an existing 1-1/2 inch run.
Sold In: 1 Each