8081 EZ Pivot Door Slide No Hinge or Baseplate, 30lb Capacity, Anochrome, 12

8081 EZ Pivot Door Slide For Medium-Duty Doors

8081 EZ Pivot Door Slide gives a medium-duty pocket door setup a defined 30 lb. class rating, so installers can match this hardware to doors within that load range confidently for repeatable cabinet builds. This Knape and Vogt pocket door hardware is designed for doors up to 42 inches high by 24 inches wide, keeping it aligned with typical multimedia and workspace cabinet door sizes. The 3/4 extension function lets the door travel smoothly without overextending the slide hardware, which supports controlled motion in compact cabinets. Top and bottom slides are attached with a wood follower strip prior to installing the assembly into the cabinet, so the door movement stays synchronized between top and bottom tracks. Precision steel ball bearings deliver smooth and quiet travel along the slide, supporting consistent feel on every open and close. The anochrome finish provides a neutral, professional appearance that blends into most cabinet interiors.

Key Door Slide Details That Support Installers

• KV Model 8081 is rated as a 30 lb. class slide for medium-duty doors, so it matches typical residential and light commercial cabinet door weights without overbuilding the hardware selection.
• Maximum door dimensions of 42 inches high by 24 inches wide define a clear working envelope, allowing accurate planning of cabinet openings and face-frame layouts around this hardware.
• Top and bottom slides attach to a wood follower strip before cabinet installation, creating a single assembly that helps maintain parallel alignment of the door through the full slide travel.
• Precision steel ball bearings provide smooth and quiet operation, which helps finished cabinets feel refined and reduces resistance during everyday use in multimedia and workspace applications.
• Available anochrome finish offers a clean, neutral look that sits well behind face frames and doors, supporting professional interior appearance on completed cabinetry runs.

3/4 Extension Pivot Slide Installation Approach

This 3/4 extension pivot door slide installs as a top-and-bottom pair tied together by a wood follower strip, so the door guidance comes from both ends along the full travel path. Attaching the slides to the follower strip prior to mounting into the cabinet allows the installer to set spacing, orientation, and screw placement on the bench before lifting the assembly into position. The design functions as pocket door hardware for multimedia and workspace components, so the cabinet opening can be sized to the 42 inch by 24 inch door envelope without guesswork on slide capacity. The 3/4 extension rating defines how far the door will project relative to the cabinet depth, helping plan adjacent components, face-frame clearances, and trim details around the finished motion path.

Using This Pocket Door Hardware In Projects

Where This 8081 EZ Pivot Door Slide Fits Best

As pocket door hardware in the multimedia and workspace components category, this Knape and Vogt 8081 EZ Pivot Door Slide suits installations where doors must move out of the way without being removed. The 30 lb. class rating for medium-duty doors lines up with typical cabinet doors that carry only their own weight, so it supports use on entertainment cabinets, workstation storage, or similar furniture pieces. The defined maximum door size of 42 inches high by 24 inches wide gives designers and builders fixed boundaries when sizing openings, choosing door materials, or laying out multiple door sections in one run. Because the slide is available in anochrome, it pairs cleanly with a wide range of interior finishes, letting the functional hardware sit visually in the background while still supporting the door through its full motion.

Why The 8081PEZ 12 Details Matter For Results

The 8081PEZ 12 part number identifies a specific 12 inch version of the 8081 EZ Pivot Door Slide, so the travel length and 3/4 extension behavior are known variables when determining cabinet depth. Having both top and bottom slides tied to a wood follower strip keeps the door tracked at two points, which helps reduce racking forces on the hinges used with the door design. Precision steel ball bearings in the slides contribute to a smooth and quiet feel, supporting consistent motion that does not fight the user or the hinges across repeated cycles. Multiple hinge options are supported by the system, including inset, free-swing, overlay, thick, and extra thick door applications, giving builders flexibility in door style while still using the same slide family. Within the KV 8080/8081/8082 line, this 8081 version is specified as providing a pair of top and bottom slides per poly-pack with mounting hardware, while leaving hinge and hinge base plate selection open to match the specific door configuration.

Common Questions About This Pivot Door Slide

Selecting This 30 lb Pivot Door Slide

Knape and Vogt 8081 EZ Pivot Door Slide gives projects a defined 30 lb. class, 3/4 extension pocket door hardware solution for doors up to 42 inches high by 24 inches wide. The 8081PEZ 12 configuration uses top and bottom slides connected by a wood follower strip, so the assembly guides the door from both ends of its travel. Precision steel ball bearings and an anochrome finish support a smooth, quiet feel and clean interior appearance. For medium-duty multimedia and workspace cabinets that need a dependable pivot door motion, this slide provides a clearly specified option ready for integration into the design.