8081 EZ Pivot Door Slide For Medium Doors

8081 EZ pivot door slide is a Knape and Vogt pocket door hardware set rated as a 30 lb class slide for medium-duty doors, so it supports typical residential multimedia or workspace cabinet doors within that load range. As part of the KV 8080/8081/8082 family, it fits applications that call for a pivoting pocket door action, helping doors move from a closed position to fully open and back into a cabinet. The slide is designed for doors up to 42 inches high by 24 inches wide, which aligns with many entertainment, office, and storage cabinet openings. Top and bottom slides are attached to the door with a wood follower strip before installation into the cabinet, giving installers a continuous mounting surface on the door edge. Precision steel ball bearings provide smooth and quiet operation, which helps doors track predictably over the life of the installation.

Key Pocket Door Slide Details That Matter

• The 30 lb class rating places this slide in the medium-duty range, so it suits doors that carry typical decorative panels without excessive hardware loads.
• Maximum door dimensions of 42 inches high by 24 inches wide align with many cabinet designs, simplifying layout when planning door size around the slide capacity.
• Top and bottom slides mount using a wood follower strip attached to the door, giving a solid, continuous edge interface that helps keep the door running straight.
• Precision steel ball bearings inside the slide create smooth, quiet travel, which matters when doors are opened repeatedly in living or work spaces.
• The Anochrome finish provides a clean, neutral appearance that blends with many cabinet interiors where hardware visibility is limited but still noticeable.
• Multiple hinge options support inset, free-swing, overlay, thick, and extra-thick doors, allowing the same slide family to adapt to varied door build-ups.

Pivot Door Slide Mounting And 3/4 Extension

This 14 inch 3/4 extension pivot door slide lets the door project out of the cabinet far enough for access while retaining part of the slide inside the case, which can help in tight cabinet depths. The top and bottom slides are fastened to a wood follower strip before the assembly is installed into the cabinet, so most mounting work happens on the bench rather than inside the case. That sequence can improve alignment because the follower strip provides a straight reference along the door edge. Precision steel ball bearings in the KV mechanism support repeated movement along this extension length, so the slide can cycle without the rough spots commonly felt in non-bearing designs.

Using This Knape And Vogt Pocket Door Slide

Where This Medium-Duty Pocket Door Slide Fits

This Knape and Vogt pocket door hardware is part of the 8080/8081/8082 model group rated for 30 lb class doors, which positions it for medium-duty cabinet doors rather than large wardrobe or passage doors. The specified maximum door size of 42 inches high by 24 inches wide fits many entertainment centers, built-in office cabinets, or storage units that benefit from doors retracting into the cabinet. Top and bottom slide members attach to the door using a wood follower strip, so the working interface between door and slide becomes a straight, uniform edge instead of relying only on the door material. That approach supports doors built from various substrates, because the follower strip provides consistent screw-holding and alignment along the entire door height. Doors that fall inside the height, width, and load class guidelines are matched to the slide geometry and bearing capacity, which supports repeatable operation.

Why Slide Details Support Reliable Door Motion

The 3/4 extension design on this 14 inch slide limits how far the door travels out of the cabinet, which can help control leverage on the slide when the door is open. Keeping part of the slide engaged in the cabinet side supports stability, especially on taller doors within the 42 inch specification. Precision steel ball bearings inside the KV mechanism carry the door load along the track rather than relying on sliding friction, resulting in smoother travel and reduced resistance when the door pivots and retracts. Multiple hinge options within the 8080/8081/8082 family allow configurations for inset, free-swing, overlay, thick, and extra-thick doors, so the same slide concept can serve different overlay conditions while maintaining the same running action. A cassette roller is available to add protection for raised panel doors, giving added guidance where panel profiles might otherwise contact adjacent surfaces. Together, these details support consistent door tracking from first installation through daily use.

Common Questions About KV 8081PEZ 14 Use

Select This Slide For Medium-Duty Pocket Doors

The 8081 EZ pivot door slide in 14 inch length and 3/4 extension couples a 30 lb class rating with door dimensions up to 42 inches high by 24 inches wide, aligning with many cabinet door layouts. The wood follower strip interface, precision steel ball bearings, and Anochrome finish give a practical combination for medium-duty pocket door projects. When a pocket door needs controlled travel, smooth operation, and support for varied hinge configurations in the KV 8080/8081/8082 family, this Knape and Vogt slide offers those defined capabilities for cabinet builds and retrofits.