Knape And Vogt 8405 Drawer Slides For Smooth Travel

Knape and Vogt 8405 drawer slides provide a 12 inch length side-mount solution that uses ball bearing construction, so the drawer travels on bearings for controlled movement that supports consistent operation in cabinet installations. The 1 inch over-travel feature allows the drawer to extend beyond its nominal length, which exposes more of the drawer interior for easier access during everyday use or service work. These slides are part of the 8405 Series, so the specification matches other 8405 applications where consistent geometry matters. The slides are unhanded side mount, which allows use on either side of the drawer without separate left and right parts during layout. An anochrome finish is used on the slides, so the metal surface has a uniform appearance that coordinates with other finished hardware in the installation.

Key 8405P 12 Details That Support Your Build

• The 12 inch length defines the slide travel, so it suits drawer depths designed around that nominal dimension in cabinet projects.
• The 1 inch over-travel design moves the drawer past its stated length, which helps pull the back of the drawer fully into reach for loading or adjustment.
• Side clearance of 1/2 inch plus 1/32 inch minus 0 inch per side specifies the slide-to-drawer spacing, which guides case and drawer sizing during construction for a controlled fit.
• A height of 1-13/16 inch defines the vertical space occupied by the slide, which supports planning rail locations and clearances in the cabinet.
• The 32 mm pattern is provided, which aligns slide mounting with 32 mm system hole layouts in cabinet sides for efficient drilling and repeatable positioning.
• Lever disconnect is built into the slide, which lets the drawer member be separated from the cabinet member during installation or removal without unfastening the hardware.
• A ball retainer latch is part of the design, which holds the ball bearings in place so the moving members stay properly supported through repeated cycles.
• Polymer stop cushions are integrated, which soften the contact at travel limits and reduce impact when the drawer reaches full extension or closing position.
• The slides are non-handed, which allows use on either side of the drawer with the same part, simplifying ordering and on-site inventory.
• Recommended fasteners are #7 x 1/2 inch Phillips pan head, which matches the slide holes and supports secure attachment into typical cabinet materials.

Side Mount, Clearance, And Mounting Pattern Details

The 8405P 12 side mount configuration places the slides on the drawer sides, so the 1/2 inch plus 1/32 inch minus 0 inch side clearance per side becomes the key design dimension between drawer and cabinet opening. The 1-13/16 inch height defines how much vertical face frame or side panel area is required, which supports layout of stacked drawers. The 32 mm pattern coordinates the mounting holes to 32 mm cabinet systems, so pre-drilled system rows can be used to position the slides along the case side. Recommended #7 x 1/2 inch Phillips pan head fasteners match the slide hole geometry, supporting solid attachment into cabinet panels while staying within the slide profile height.

Where 8405P 12 Slides Fit In Cabinet Projects

Using 12 Inch Over Travel Drawer Slides In Cabinets

The 12 inch over travel drawer slides work within cabinet designs where the drawer box depth is built around a 12 inch nominal slide length, so the slide motion aligns with the case interior. The 1 inch over-travel built into the KV Model 8405 allows the drawer to extend beyond the cabinet front more than standard full-extension, which brings rear contents closer to the user in storage or shop drawers. The 1/2 inch plus 1/32 inch minus 0 inch side clearance each side sets the required gap between the drawer and opening, so drawer widths can be sized precisely during fabrication. The unhanded side mount configuration supports using the same slide pair on both left and right sides, which simplifies planning and reduces part variation when building multiple similar cabinets.

Details That Support Repeatable Slide Alignment

The 32 mm pattern on these ball bearing side mount drawer slides aligns with 32 mm cabinet construction, so slide positions can follow standard system rows for consistent vertical spacing across banks of drawers. Lever disconnect built into the 8405P 12 side mount drawer slide lets installers separate the drawer member from the cabinet member after mounting, which helps fit drawer boxes without handling the full assembly in tight interiors. The ball retainer latch helps keep the bearings properly seated, which maintains smooth travel when drawers are cycled during normal use. Polymer stop cushions help moderate the stop points, which can reduce shock loading on both the slide and the cabinet structure at the ends of travel. The anochrome finish on the steel components presents a uniform appearance and surface treatment, which coordinates visually with other anochrome finish drawer slide installations in the same project.

Common Questions About 8405P 12 Installation And Use

Selecting 8405P 12 Slides For Your Next Project

The Knape and Vogt 8405P 12 side mount drawer slide combines a 12 inch length, 1 inch over-travel, and 1/2 inch plus 1/32 inch minus 0 inch side clearance, so it fits drawer designs built around those dimensions. The 32 mm pattern and recommended #7 x 1/2 inch Phillips pan head fasteners support straightforward mounting in system-based cabinet construction. Lever disconnect, the ball bearing design, ball retainer latch, and polymer stop cushions work together to support smooth travel and practical handling during installation and use. For cabinet runs designed around 8405 geometry and anochrome finish, this model aligns the slide details with those project requirements.