Knape And Vogt 8405 Drawer Slides For Smooth Travel

Knape and Vogt 8405 drawer slides give a 1 inch over-travel in a 14 inch length, so the drawer extends beyond the cabinet face for better access to stored items in everyday use. The side mount design positions each slide on the cabinet side, which suits standard drawer box construction in many shop and jobsite layouts. A specified side clearance of 1/2 inch plus 1/32 inch minus 0 inch per side sets a clear fit range, which helps size drawer boxes accurately for consistent running clearance. The slide height of 1-13/16 inch defines how much vertical space the slide occupies, which matters when working near fixed shelves or stacked drawer banks. A 32 mm pattern is provided, tying into line-bored cabinet systems and speeding layout when drilling case sides on production equipment.

Key 8405P 14 Details That Support Daily Use

• The 1 inch over-travel allows the 14 inch drawer to project past the cabinet face, which improves hand access to the back of the drawer during loading and unloading.
• Side clearance of 1/2 inch plus 1/32 inch minus 0 inch per side defines the target gap, which supports smooth ball bearing movement without racking when the drawer is fully extended.
• The 1-13/16 inch slide height sets a compact vertical profile, which helps fit the slide between closely spaced drawers or under shallow tops where space is limited.
• The 32 mm pattern aligns with system drilling, which reduces layout time and keeps screw locations consistent across cabinets in shop or on-site installations.
• The Anochrome finish covers the steel slide members, which provides a uniform appearance along the cabinet side that coordinates with common interior hardware finishes.
• The non-handed design allows either slide to mount on left or right, which simplifies stocking and speeds assembly by removing orientation checks during installation.

Side Mount Installation And Fastener Choices

This side mount ball bearing slide uses cabinet and drawer members fixed to the case side and drawer side, which suits many face frame and frameless layouts. Recommended fasteners are #7 x 1/2 inch Phillips pan head screws, giving a head style and length that seats in the slide holes while keeping penetration shallow in typical cabinet materials. The lever disconnect feature allows the drawer member to separate from the cabinet member, which helps mount each piece to the workpiece and then reconnect during final installation. A ball retainer latch holds the bearing cage in position, which maintains alignment while mounting and when cycling the slide under load.

How This 14 Inch Slide Works In Cabinets

Where The 8405P 14 Drawer Slides Are Used

This Knape and Vogt 8405P 14 slide is a side mount ball bearing drawer slide intended for drawer applications where controlled extension and return are important. The 1 inch over-travel on a 14 inch member helps expose the full drawer interior in cabinets, tool storage, or shop furniture where visibility into the rear is useful. A hold-in anti-rebound feature keeps the drawer in the closed position, which counteracts bounce at the front edge when the drawer is pushed shut in normal use. Polymer stop cushions are built into the design, which soften the contact at the end of travel and reduce harsh impact when the drawer reaches full close or full extension. The non-handed layout suits both left and right installations, which is useful in production runs where slides are pulled from stock without pairing to a specific cabinet side ahead of time.

Details That Help Fit, Operation, And Replacement

The specified 1/2 inch plus 1/32 inch minus 0 inch side clearance per side sets a dimensional target that helps drawers slide freely without excessive play, which is important when replacing worn slides with this 8405P 14 model. Using #7 x 1/2 inch Phillips pan head screws in the mounting holes gives a positive mechanical connection, which maintains alignment so the ball bearing action remains smooth over repeated cycles. The lever disconnect function allows the installer to remove the drawer member by actuating the lever, which simplifies installing or servicing the drawer box without disturbing the cabinet member. A ball retainer latch keeps the ball bearings located during handling, which supports dependable tracking when the drawer is repeatedly opened and closed. Polymer stop cushions operate at the contact points, which temper the closing and opening stops and can help limit transmitted shock to the cabinet case. The Anochrome finish covers the slide components, which supports a consistent look and surface over the working life of the cabinet hardware.

Common Questions About KV 8405P 14 Drawer Slides

Selecting This 14 Inch Slide For Your Project

The Knape and Vogt 8405 drawer slides combine 1 inch over-travel, side mount layout, and 1-13/16 inch height to support many cabinet and furniture drawer designs using a 14 inch slide length. Defined side clearance of 1/2 inch plus 1/32 inch minus 0 inch per side gives clear sizing targets when building or updating drawer boxes. Specified #7 x 1/2 inch Phillips pan head screws, a 32 mm pattern, lever disconnect, and hold-in anti-rebound features all work together to support consistent drawer action in woodworking and cabinet projects using this 8405P 14 model.