Clip-On Cam Adjustable Face Frame Mounting Plate, Nickel-Plated, Screw-On, 1mm

Clip-On Cam Mounting Plate For Face Frames

clip-on cam adjustable face frame mounting plate describes a Salice America hinge mounting plate designed for face frame cabinets, so installers can pair it with compatible clip-on hinges for clean, repeatable door mounting on framed constructions. The plate belongs to the hinge mounting plates product class, which means it serves as the fixed base tying the hinge to the cabinet, giving you a stable reference when laying out door reveals. Constructed of die-cast steel, the plate provides a rigid base under the hinge arm, supporting long-term alignment on frequently used doors. Its nickel plating resists corrosion, so the plate keeps a consistent surface in typical shop and jobsite environments where humidity and handling can affect bare steel. The 1 mm plate thickness supports overlay applications within its range, helping you hit your target overlay while keeping a low plate build for face frame work.

Key Salice Mounting Plate Details For Installers

• The plate is constructed of die-cast steel, which gives the hinge base a solid, non-flexing platform, helping doors swing true under everyday cabinet use.
• Nickel plating on the plate resists corrosion, so the mounting surface stays stable and smooth, supporting consistent hinge movement over time.
• Two cam plates provide -0.5 mm to +2.8 mm cam depth adjustment, letting you pull the door closer or further from the face frame to fine-tune door-to-cabinet gaps.
• The same two cam plates provide +/-2 mm cam height adjustment, so you can nudge the door up or down at the plate to straighten reveals along adjacent doors.
• The plate is available in 1 mm to 4 mm thickness for overlay applications, allowing selection of a base thickness that aligns with the required door overlay on the face frame.

Screw-On Face Frame Plate Installation Workflow

The mounting plate is a screw-on design, which anchors directly into the cabinet face frame, giving you a secure, mechanical connection to support the hinge arm. The 1 mm thickness version keeps the hinge base close to the frame, useful when you are targeting specific overlay values within the offered thickness range. Two integrated cam plates provide -0.5 mm to +2.8 mm depth adjustment, so once the plate is fixed with screws, you can adjust the cam rather than re-positioning the plate. The same cam system offers +/-2 mm height adjustment at the plate, so you can correct small alignment issues after hanging the door, saving layout time during fit and finish.

Using This BAU3R19 Plate In Cabinet Work

Where This Face Frame Mounting Plate Fits

This hinge mounting plate is identified as a face frame mounting plate, so it is intended for cabinets that use a face frame construction rather than frameless sides. As a 1 mm hinge mounting plate within a family that ranges from 1 mm to 4 mm thickness, it supports overlay applications where a thin base helps you hit an overlay target while keeping the hinge geometry consistent. The plate belongs to the hinge base plates category, so it works as the interface between cabinet structure and hinge arm, giving you a repeatable mounting datum for doors across a run of face frame cabinets. With a clip-on cam adjustable configuration, it pairs with compatible clip-on hinges, allowing the hinge arm to connect to a fixed, die-cast steel base that maintains alignment.

Why Cam And Nickel Details Improve Results

The die-cast steel construction gives the BAU3R19 mounting plate a robust body, so hinge forces from frequent opening and closing transfer into a solid casting instead of a flexible bracket, supporting long-term door alignment. Nickel plating on the plate resists corrosion, keeping the cam surfaces and contact areas smooth, which helps the adjustment mechanism operate reliably during install and later tuning. Two cam plates with -0.5 mm to +2.8 mm depth adjustment let you fine-tune how close the door sits to the face frame, controlling reveal depth without moving screw positions. The same cams provide +/-2 mm height adjustment, so you can align doors vertically along a bank of cabinets from the plate itself, reducing rework during final fitting. Being part of a series available from 1 mm to 4 mm thickness, this 1 mm version fits overlay applications where a low-profile base supports the intended hinge overlay geometry on face frames.

Common Questions About This Salice Mounting Plate

Selecting This Plate For Face Frame Overlay Work

This Salice America BAU3R19 hinge mounting plate ties a clip-on hinge to a face frame with a die-cast steel, nickel-plated base, so doors rest on a stable, corrosion-resistant platform. The 1 mm thickness, working within the 1 mm to 4 mm overlay range, helps target specific overlay geometry on framed cabinets. With -0.5 mm to +2.8 mm cam depth and +/-2 mm cam height adjustment, the plate lets you dial in reveals from the cam rather than relocating screw positions. For face frame cabinet runs needing precise overlay and fine adjustment at the plate, this mounting plate offers a controlled way to set door position.