Clip-On Cam Adjustable Face Frame Mounting Plate, Nickel-Plated, Screw-On, 6mm

Clip-On Face Frame Mounting Plate For Hinges

clip-on cam adjustable face frame mounting plate describes a Salice America hinge mounting plate built for face frame work where precise door positioning matters. The plate is constructed of die-cast steel, so it provides a solid base under the hinge arm for consistent support during everyday cabinet use. Its nickel plating resists corrosion, which helps the plate maintain smooth hinge movement in typical shop and jobsite environments. This hinge mounting plate belongs to the hinge base plates product class, so it is designed to work as the fixed component that anchors the hinge system to the cabinet. A lifetime warranty backs the plate, which signals that the manufacturer supports long-term service in normal cabinet applications. With thickness options from 1 mm to 4 mm for overlay applications, the plate gives flexibility when setting reveal and door position across different cabinet runs.

Key Mounting Plate Details That Support Work

• The die-cast steel construction creates a rigid platform under the hinge arm, helping doors stay aligned under regular opening and closing in typical cabinet use.
• Nickel plating resists corrosion, which helps the hinge connection remain dependable in normal indoor environments where moisture and temperature can vary over time.
• Two cam plates provide -0.5 mm to +2.8 mm cam depth adjustment, allowing fine front-to-back positioning so doors can sit flush and consistent across a run of face frame cabinets.
• The same two cam plates provide plus or minus 2 mm cam height adjustment, so an installer can move the door up or down slightly to align top and bottom reveals between adjacent doors.
• Available 1 mm to 4 mm thickness options for overlay applications allow the plate thickness to support the intended overlay, helping match door projection and frame coverage job to job.
• A lifetime warranty supports the mounting plate, which matters when specifying hardware for projects where long-term performance and reduced rework are priorities.

Face Frame Hinge Plate Adjustment And Setup

This face frame hinge mounting plate uses a clip-on design, so it serves as the fixed reference point while the hinge arm clips on and off during fitting and adjustment. The plate attaches by screw-on mounting, which gives the installer a familiar approach for securing the plate to the face frame before hanging doors. Two cam plates built into the design provide -0.5 mm to +2.8 mm cam depth adjustment, giving controlled in-and-out movement of the door relative to the frame. The same cam system offers plus or minus 2 mm cam height adjustment, which allows small vertical corrections without relocating the screws. Available thicknesses from 1 mm to 4 mm for overlay applications help match door overlay requirements so that gaps and reveals can be brought into a consistent range across the installation.

Using This Salice Mounting Plate In Cabinet Work

Where This Face Frame Mounting Plate Fits Best

This Salice America hinge mounting plate is intended for face frame cabinet construction where a base plate is required to secure a compatible clip-on hinge arm. As part of the hinge mounting plates category, it acts as the structural interface between the hinge mechanism and the cabinet face frame, so it is well suited for shop-built or onsite-assembled face frame jobs. The plate is constructed from die-cast steel, which provides a firm foundation when doors are repeatedly opened and closed in residential or commercial cabinetry. Nickel plating resists corrosion in typical indoor environments, supporting dependable operation over time in kitchens, baths, and general storage cabinetry. Height options from 1 mm to 4 mm thickness for overlay applications give the installer a way to select a plate that supports the planned overlay dimension, helping achieve the desired balance between frame coverage and clearance.

Adjustment Range That Helps Fine-Tune Door Alignment

The mounting plate uses two cam plates that provide -0.5 mm to +2.8 mm cam depth adjustment, giving a practical range for moving doors closer to or further from the face frame so they sit properly relative to adjacent fronts. Plus or minus 2 mm cam height adjustment in the same cam system lets an installer raise or lower the door slightly without remounting, which is useful when dialing in even reveals along a row of cabinets. Screw-on mounting allows these depth and height changes to be made by turning the cams rather than shifting the fixing points, which saves time during final adjustments and service visits. The 6 mm face frame mounting height identified in the description and the 1 mm to 4 mm thickness options for overlay applications work together to define where the door will land in relation to the frame, giving predictable results when repeating a layout across multiple cabinets. The lifetime warranty supports using this plate in projects where long service life and low call-backs are important planning criteria.

Common Questions About This Hinge Mounting Plate

Selecting This Mounting Plate For Your Project

This Salice America clip-on cam adjustable face frame mounting plate offers die-cast steel construction, nickel plating, and a two-cam system for depth and height adjustment, giving practical control over door position. With 1 mm to 4 mm thickness options for overlay applications and a 6 mm mounting height reference, it supports repeatable layouts across multiple face frame cabinets. A lifetime warranty further supports using this plate where long-term service is expected. Choose this plate when a face frame hinge base with cam depth and height adjustment is needed to deliver consistent alignment in cabinet projects.