NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPAG100CSR to RSAG100CSR.

Omega National Red Oak Appliance Garage Storage

Omega National red oak appliance garage gives a dedicated corner unit for keeping countertop appliances behind a tambour door, so the appliances stay ready to use while the corner area is put to work. The AG-100CSR model is a three piece unit built around a 17 inch wide by 18-1/2 inch high solid wood frame, so the front face presents as real red oak in a standard cabinet-friendly size. This frame houses the tambour door, so the moving door tracks within a stable wood surround rather than against the cabinet interior. Two 11 inch wide by 19 inch high veneer faced 3/8 inch thick MDF end panels round out the three piece layout, providing consistent sides that visually tie into the frame. The corner unit design focuses storage into a corner run, turning that space into a usable small-appliance station.

Key Corner Appliance Garage Details That Matter

• The three piece unit layout, with a solid wood frame and two MDF end panels, divides the work between structural support and side coverage, so the installer positions a known assembly rather than loose components during cabinet work.
• The 17 inch wide by 18-1/2 inch high frame size defines the front opening footprint, so planning the corner cabinet run and adjacent fronts stays precise when laying out face frames or frameless fronts.
• The two 11 inch wide by 19 inch high veneer faced 3/8 inch thick MDF end panels create uniform side walls, giving the cabinet interior a finished look that matches the front frame height while using a stable engineered core.
• The tambour door is built around a spring tension track system, so the door moves with controlled resistance, helping the door travel feel smooth along the tracks during daily opening and closing.
• The tambour design focuses on non-binding operation, so the slats track through the corner without catching, supporting dependable movement when the door is rolled up and down over time.
• The corner unit availability in four species of solid wood and veneer tambour gives design flexibility, so red oak can be matched where that species is used elsewhere in the kitchen layout.

Fit And Opening Details For Cabinet Layout

The tambour door opening size of 13-3/4 inch wide by 16-1/2 inch high defines the working access space, so the installer and designer know how much clear height and width is available for typical small appliances. With the overall frame at 17 inch wide by 18-1/2 inch high, there is a clear distinction between the external footprint and the internal door opening, so any appliance choice can be considered against both clearance dimensions when arranging the corner station. The two 11 inch wide by 19 inch high end panels add side depth and height, so the unit occupies a predictable block within the corner cabinet area and aligns cleanly with neighboring cabinet elements.

Using The AG-100CSR Appliance Garage In Corner Runs

Where This Corner Appliance Garage Fits Best

The Omega National AG-100 Series red oak appliance garage is identified as a corner unit, so it is suited to the part of a countertop run where two walls meet and space is often underused. The solid wood frame at 17 inch wide by 18-1/2 inch high establishes a defined front module, so it can line up with other cabinet fronts in the corner section while still housing a full tambour door. The two 11 inch wide by 19 inch high veneer faced 3/8 inch thick MDF end panels extend from this frame, so the side walls transition from the face into the cabinet area without gaps. Because the corner units are available in four species of solid wood and veneer tambour, a shop working with a red oak program can keep species consistent across doors, fronts, and this storage piece.

How Tambour Door Construction Supports Daily Use

The tambour door in the AG-100CSR is designed around a spring tension track system that provides a smooth, non-binding operation, so opening and closing the garage becomes a controlled motion rather than a loose slide. That spring tension track system keeps the tambour pulled into its route, so the slats follow the curved path without dragging against the frame. The non-binding focus helps the door travel without sticking, so repeated use in a kitchen setting does not interrupt workflow when accessing appliances. With the door opening size set at 13-3/4 inch wide by 16-1/2 inch high, users gain a defined access window that pairs with the smooth travel, so reaching for appliances through the opening stays straightforward during routine tasks.

Common Questions About The AG-100CSR Corner Unit

Selecting This Red Oak Corner Appliance Garage

The Omega National AG-100CSR solid wood frame corner appliance garage uses a 17 inch wide by 18-1/2 inch high red oak front with a spring tension track tambour door, so it brings controlled door travel and clear access dimensions to a corner installation. The two 11 inch wide by 19 inch high veneer faced 3/8 inch thick MDF end panels extend this front into a finished unit, so the corner segment of the kitchen can function as a dedicated appliance zone. For projects built around red oak and needing organized corner appliance storage, this AG-100 Series appliance garage aligns the species, layout, and door action in one defined component.