NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPAG100CSC to RSAG100CSC.

Omega National Cherry Appliance Garage For Corners

Omega National AG-100 cherry appliance garage gives a dedicated corner unit for storing countertop appliances behind a retracting door, so the counter surface stays usable while equipment stays ready at hand between tasks.

The AG-100CSC corner unit appliance garage uses a 17 inch wide by 18-1/2 inch high solid wood frame, which creates a defined opening for the tambour door and aligns the unit with surrounding cabinetry faces.

A cherry solid wood frame around the tambour door provides a consistent visible species on the front edge, which supports jobs that call for cherry fronts across doors, drawer fronts, and trim in the same run.

The appliance garage design places the tambour door in a housing above the work surface, so the door retracts vertically into the frame cavity and leaves the countertop depth in front of the unit open for loading and unloading appliances.

Key Corner Appliance Garage Details For Planning

• The three piece unit layout groups the solid wood frame housing the tambour door with two veneer faced 3/8 inch thick MDF end panels, so the installer receives defined parts for front framing and side panel closure in a corner run.
• The corner unit measures 17 inches wide at the frame and uses 11 inch wide by 19 inch high end panels, which helps the cabinetmaker plan adjacent cabinet widths and countertop depth transitions around the corner.
• A door opening size of 13-3/4 inches wide by 16-1/2 inches high defines the clear access space, which helps determine which small countertop appliances can be stored behind the tambour without interference.
• The tambour door uses a spring tension track system that gives smooth, non-binding operation, which supports repeated daily opening and closing without sticking or uneven movement along the track.
• The corner appliance garage is part of the AG-100 Series with cherry solid wood and veneer tambour, aligning with other AG-100 series components where matching wood species and tambour appearance are required across a project.

Corner Tambour Appliance Garage Fit And Framing

The 17 inch wide by 18-1/2 inch high solid wood frame housing the tambour door establishes the main footprint for the AG-100CSC, giving designers a fixed front dimension to work into corner upper cabinet layouts above a standard countertop.

Two 11 inch wide by 19 inch high veneer faced MDF end panels extend the frame back into the corner, so the cabinet run gains rigid sides that align with wall lines and create a defined enclosure for the retracting tambour door behind the frame.

The 13-3/4 inch wide by 16-1/2 inch high door opening defines the usable front access for appliances, letting planners size the vertical clearance above the countertop and the horizontal reach into the corner when positioning this appliance garage.

The spring tension track system guides the tambour door as it travels inside the frame, so the door path remains predictable during installation, helping the installer orient the tracks square to the front frame for consistent movement.

Using The AG-100CSC Corner Appliance Garage In Kitchens

Corner Appliance Garage Layouts And Typical Placement

The Omega National corner unit appliance garage places the tambour door and frame across a kitchen corner, using the 17 inch wide front to bridge between runs while the 11 inch wide end panels return into the corner space along each wall.

By using 19 inch high end panels with the 18-1/2 inch high frame, the AG-100CSC creates a tall corner enclosure that works above a counter depth, so appliances can sit on the countertop and slide behind the tambour door when not in use.

The door opening size of 13-3/4 inches wide by 16-1/2 inches high sets the limit for appliance height and width inside the corner, so commonly used small appliances that fit these dimensions can remain plugged in and simply roll forward when needed.

The three piece unit structure - a solid wood frame housing the tambour door plus two veneer faced MDF end panels - creates a defined geometry for shop layout, allowing fabricators to position the appliance garage in cut lists between standard wall cabinets.

Corner units from this AG-100 Series are available in four species of solid wood and veneer tambour, so cherry projects using AG-100CSC can align with other species choices from the same line when a job calls for multiple wood options across different rooms.

Tambour Door Operation And Daily Workflow Impact

The tambour door on the AG-100CSC is designed around a spring tension track system, providing smooth, non-binding operation as the door is lifted and retracted into the frame cavity during daily use along a busy countertop line.

Because the track system focuses on non-binding operation, the tambour door follows a controlled path, which reduces resistance during opening and closing and supports quick access to appliances without the user wrestling a sticky door.

The solid wood frame housing the tambour door stabilizes the track system, so the movement of the door stays aligned with the 13-3/4 inch wide opening and reduces lateral play that could interfere with adjacent cabinet doors or wall finishes.

With veneer faced 3/8 inch thick MDF end panels enclosing the sides, the tambour tracks sit within a consistent enclosure, which helps the door maintain its curve as it travels and supports long-term alignment of the spring tension mechanism.

The cherry solid wood and veneer tambour construction gives a unified wood appearance on visible faces, which assists installers in blending the appliance garage with neighboring cherry fronts so the tambour door reads as part of the same cabinet run.

Common Questions About The AG-100CSC Corner Unit

Select The AG-100CSC For Corner Appliance Storage

The Omega National AG-100 cherry appliance garage supplies a 17 inch wide solid wood framed corner unit with a spring tension track tambour door, giving designers a defined cherry solution for placing small appliances behind a retracting door.

With a 13-3/4 inch wide by 16-1/2 inch high opening and veneer faced 3/8 inch thick MDF end panels, this AG-100 Series cherry corner unit helps projects needing a coordinated corner appliance storage point in a cherry cabinet run.