NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NP1AG-100CSAL to RS1AG-100CSAL.
Omega National AG-100 Series Alder Appliance Garages provide a corner unit appliance garage solution using a three piece construction that organizes counter appliances in a defined cabinet space. The corner unit design turns an otherwise hard-to-use corner into a dedicated storage area, which helps keep the counter working area clear during daily use. The unit is built around a solid wood frame sized at 17 inches wide by 18-1/2 inches high, giving a fixed structure that defines the appliance opening and overall layout. This solid wood frame houses the tambour door, so the moving door is supported by a stable frame during repeated operation. Two 11 inch wide by 19 inch high veneer faced 3/8 inch thick MDF end panels complete the three piece layout, forming the sides that visually tie into surrounding cabinetry. The combination of solid wood frame and veneer faced MDF panels creates a corner appliance garage appearance suited to kitchen and bath cabinet runs.
The Omega National corner unit appliance garage provides a door opening size of 13-3/4 inches wide by 16-1/2 inches high, giving a fixed usable access area for placing and retrieving countertop appliances. This defined opening size sets the practical height and width of items that can be moved through the tambour door space during daily operation. The overall 17 inch wide frame dimension establishes the footprint needed on the corner cabinet run, providing a straightforward reference when laying out adjacent fronts. With the end panels at 11 inches wide by 19 inches high, the installer can relate those side measurements to neighboring cabinet heights and depths, supporting alignment along the corner. The combination of frame dimensions and door opening measurements allows accurate planning of the corner appliance zone inside a kitchen or bath layout.
The Omega National corner unit appliance garage is designed as a corner solution in kitchen and bath cabinet runs, so it occupies the corner position where two cabinet lines meet. The 17 inch wide by 18-1/2 inch high solid wood frame establishes a defined front for the corner, which helps line up doors and drawer fronts around the meeting point. Two 11 inch wide by 19 inch high veneer faced 3/8 inch thick MDF end panels form the sides, so the unit presents finished surfaces that can align with neighboring cabinet ends. The unit is described as a corner appliance garage, so it is intended to hold appliances within the corner space behind the tambour door. The AG-100 Series alder configuration combines solid wood and veneer tambour materials in a species that coordinates with alder cabinetry, creating a consistent material choice across the corner section. Because the unit belongs to the Appliance Garages & Tambour Doors class, it serves as a specialized enclosure for housing and operating a tambour door in that corner area.
The tambour door in this Omega National appliance garage is designed around a spring tension track system, providing a smooth, non-binding operation during opening and closing. The spring tension track system supports the tambour as it travels, which helps the door move along its path without sticking under normal use. This smooth door action is important in an appliance garage because the door must cycle frequently to access appliances while remaining within the cabinet footprint. The solid wood frame housing the tambour keeps the track and door components anchored, so the movement occurs within a stable structure sized at 17 inches wide by 18-1/2 inches high. The door opening size of 13-3/4 inches wide by 16-1/2 inches high defines the clear space the tambour uncovers, so each opening cycle reveals a consistent access area. With corner units available in four species of solid wood and veneer tambour, the AG-100CSAL alder version fits projects specifying alder while using the same basic tambour and track concept for predictable operation.
The Omega National AG-100CSAL uses a solid wood frame measuring 17 inches wide by 18-1/2 inches high, which sets the front size of the corner appliance garage in the cabinet layout.
The corner unit appliance garage has a door opening size of 13-3/4 inches wide by 16-1/2 inches high, defining the clear area available for moving appliances in and out.
The tambour door is designed around a spring tension track system, which supports smooth, non-binding movement as the door is raised and lowered during regular use.
The AG-100 Series alder corner appliance garage uses a solid wood frame in alder and two veneer faced 3/8 inch thick MDF end panels, combining solid wood and veneer components.
This product is a corner unit appliance garage categorized under Appliance Garages & Tambour Doors, so it is intended for use in kitchen and bath cabinet corner locations.
The manufacturer part number AG-100CSAL identifies the Omega National AG-100 Series corner appliance garage in alder, distinguishing this specific alder corner unit within the AG-100 lineup.
The Omega National AG-100 Series Alder Appliance Garages provide a defined corner unit solution using a 17 inch wide by 18-1/2 inch high solid wood frame, a spring tension track tambour door, and veneer faced 3/8 inch thick MDF end panels sized at 11 inches wide by 19 inches high. With a usable door opening of 13-3/4 inches wide by 16-1/2 inches high and alder solid wood and veneer tambour construction, the AG-100CSAL gives an appliance garage layout tailored to corner cabinet positions. For projects needing a corner appliance garage in alder that matches Appliance Garages & Tambour Doors requirements, this corner unit provides the fixed dimensions, door opening, and tambour track system specified by Omega National.
Sold In: 1 Each