Omega National 62" T-Moulding for Stemware, Red Oak - BOX/12, M4640OUF2

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPSRT62RO to RSSRT62RO.

Omega National T-Moulding For Stemware Runs

Omega National T-moulding for stemware is a 62 inch long, T-shaped middle-piece profile designed for wine bottle and stemware storage runs, so it helps create continuous center sections between end pieces in a coordinated layout. This T-shaped profile is part of a molding system available in two profile types, T-shaped middle pieces and L-shaped end pieces, which lets installers build straight or segmented stemware rack runs with matching geometry. The moulding is made from unfinished solid wood in a red oak species, so it can be finished on site to match surrounding cabinetry and trim in the same wood family. Both the T-shaped and L-shaped moulding profiles share the same 62 inch length, giving fabricators a consistent starting dimension for cutting multiple sections from one stick or spanning wider cabinet areas in wine and stemware storage projects.

Red Oak Stemware Moulding Details That Matter

• The moulding is a T-shaped middle-piece profile, which anchors the center of a stemware or wine storage run so the installation aligns visually with L-shaped end pieces from the same system.
• Both T-shaped middle pieces and L-shaped end pieces are 62 inches in length, so runs can be laid out from a common length, simplifying repeat cuts and helping maintain consistent spacing along cabinets.
• The product is manufactured in unfinished solid red oak, which allows field finishing with stains or clear coats so installers can match existing red oak cabinet doors, face frames, or trim.
• The moulding belongs to a wine bottle and stemware storage product class, so its form factor is suited to bar areas, kitchen cabinetry, or similar installations where stemware organization is needed.
• The piece is part of an Omega National Products molding line, so it coordinates with other Omega National stemware rack components specified in the same category for unified project planning.

Installing 62 Inch Red Oak T-Moulding Sections

This Omega National 62 inch T-moulding for stemware gives installers a predictable length to work from, so they can plan cuts and joints along a bar or cabinet run using standard shop methods. The T-shaped middle-piece profile is designed to sit between corresponding L-shaped end pieces, so the run maintains a clear start, middle, and end geometry when laid out across uppers or soffits. Because the moulding is supplied in unfinished solid red oak, it can be sanded and finished after cutting, allowing edge details and cut faces to receive the same stain or clear coat as factory faces. The solid wood construction in red oak also accepts milling or light profiling where needed, so the stemware storage installation can be tuned visually to surrounding wine bottle and stemware storage components.

Using This Stemware Moulding In Cabinet Runs

Where This T-Moulding Fits In Stemware Layouts

This 62 inch red oak T-moulding fits into wine bottle and stemware storage layouts as the middle-piece profile, so it occupies the central span between Omega National L-shaped end pieces. The consistent 62 inch length shared across both profiles lets installers map out cabinet or bar runs by counting full-length sections, then cutting to final sizes as field conditions dictate. Because the moulding is part of the Omega National Products stemware racks category, it aligns with other wine bottle and stemware storage elements specified under the same brand, which helps maintain a unified appearance across an installation. The unfinished solid red oak construction supports on-site staining or clear finishing, so the installed T-moulding can visually tie upper stemware areas to red oak casework, panels, or valances in adjacent zones.

Why Omega National Details Support Repeatable Results

The Omega National M4640OUF2 part number identifies this specific 62 inch red oak T-shaped middle-piece profile, which helps shops reorder the same profile when expanding existing wine bottle and stemware storage layouts. Having both T-shaped and L-shaped profiles in the same unfinished solid wood species gives fabricators predictable matching grain and color before finishing, so cutoffs and new sections blend when assembled in longer runs. The uniform 62 inch length on each piece streamlines shop workflows, since jigs and stops can be set once to process multiple mouldings for replicated cabinet runs. Being classified specifically under wine bottle and stemware storage means the geometry is intended for those applications, so designers can confidently integrate this Omega National T-moulding into bar, kitchen, or entertainment cabinetry where stemware racks are part of the overall plan.

Stemware T-Moulding Questions From Installers

Selecting This Red Oak T-Moulding For Projects

This Omega National 62 inch T-moulding for stemware, in unfinished solid red oak, gives cabinet and millwork shops a defined middle-piece profile for wine bottle and stemware storage runs. The pairing of T-shaped middle pieces with L-shaped end pieces in the same length lets designers structure consistent layouts along upper cabinets or bar faces. With its role specified under wine bottle and stemware storage and stemware racks, this M4640OUF2 moulding suits projects where organized stemware display must visually align with red oak cabinetry. For work that calls for a matching red oak system and predictable 62 inch lengths, this T-moulding provides a clear, cataloged solution.