3D Edgebanding, Color 3D700R Brushed Aluminum, 2mm Thick 15/16" x 246' Roll

3D Edgebanding For Brushed Aluminum Projects

3D edgebanding gives you a transparent acrylic edge strip that is printed on the reverse side, so the brushed aluminum look is protected inside the material while still presenting the design clearly on the face of the edge.

This Doellken Woodtape edge banding is classified as PVC edgebanding and is built as a 3D acrylic product that visually supports modern aluminum-look casework, panels, and components that need a matching edge detail.

The roll size of 15/16 inch width by 2mm thickness spans 246 feet, which covers long production runs or multiple cabinets in one color without frequent roll changes, helping maintain consistent visual results along all exposed edges.

The specific color reference 3D700R Brushed Aluminum and manufacturer part number 3D700R-1402-29 give you a clear, repeatable match for ongoing jobs that need the same edge appearance over time.

The material construction and finish are designed to work on projects where an aluminum appearance is required on the edge while the underlying acrylic protects the graphic during normal shop handling.

Key Brushed Aluminum 3D Edgebanding Details

• The transparent acrylic construction is printed on the reverse side, which keeps the brushed aluminum graphic away from direct surface contact so normal handling and edge operations do not reach the print layer.
• The 2mm thickness gives a substantial edge build, which supports clean profiling operations and creates a pronounced aluminum-look band around workpieces that visually matches thicker fronts.
• The 15/16 inch width is sized for common panel thicknesses, so the edge banding can cover the edge and slight overhang for trimming while still presenting the brushed aluminum design across the full edge.
• The 246 foot roll length supports production runs where a single color is used repeatedly, which helps maintain uniform appearance across cabinets or fixtures that share the 3D700R Brushed Aluminum design.
• The 3D edgebanding design is intended for automatic edgebander applications, so it integrates into standard edgebanding workflows where consistent feed and machining of acrylic edges are part of the process.

Installation Use On Automatic Edgebanders

This 3D edgebanding is designed for automatic edgebander applications, so it is suited for machines that feed and apply edge material continuously while trimming and finishing the 2mm acrylic edge in one workflow.

The 15/16 inch by 2mm format works with automatic edgebanders that are set up for this width and thickness, allowing the material to track steadily, accept trimming, and reveal the brushed aluminum design across the full edge after processing.

The reverse-side printed acrylic construction keeps the print layer away from direct adhesive contact, which helps the brushed aluminum appearance remain consistent while the automatic edgebander applies glue to the non-printed side of the band.

The full 246 foot roll configuration supports longer machine runs between roll changes, which helps keep the automatic edgebander operating steadily with the same Doellken Woodtape 3D700R color throughout a project.

How This Doellken 3D Edgebanding Works In Practice

Where 3D700R Brushed Aluminum Edgebanding Fits

The 3D edgebanding in color 3D700R Brushed Aluminum fits projects that need an aluminum-look edge on panels where the visual design needs to stay consistent from face to edge, such as cabinets, fixtures, and furniture elements.

The 15/16 inch width covers common board thicknesses used in these assemblies, so the edge banding can be applied on automatic edgebanders and then trimmed to a flush, brushed aluminum edge that visually aligns with aluminum-effect surfaces.

The 2mm thickness supports a more pronounced edge detail, which is often selected when designers want the aluminum effect to read clearly from the front and side, allowing the edge band to become a defined part of the overall look.

The use of transparent acrylic with reverse-side printing means the brushed aluminum graphic is seen through the acrylic layer, which gives a sense of depth to the edge while the print remains protected behind the clear material during normal shop operations.

The color identification as 3D700R and the manufacturer part number 3D700R-1402-29 allow fabricators to specify and repeat the same brushed aluminum edge across multiple projects, so replacement panels or future additions can match the existing edge appearance.

The edgebanding category listing as PVC edgebanding with 3D acrylic construction places this product in workflows where synthetic edge materials are already used and where matching specific decorative finishes forms part of the job requirements.

Why Reverse-Printed Acrylic Supports Consistent Results

The transparent acrylic body of this 3D edgebanding is printed on the reverse side, so the printing is shielded by the acrylic thickness, which keeps the brushed aluminum design away from direct abrasion during standard handling and finishing.

This reverse-side printing allows the edge to be machined and trimmed during automatic edgebander processing while the visible brushed aluminum effect is seen through the clear acrylic, giving consistent appearance across multiple passes and parts.

The construction is designed so that glues or cleaners that contain solvents should not come in contact with this product, because solvent contact can affect acrylic, which matters when selecting adhesives and cleaning agents around the edge application area.

By specifying that glues or cleaners that contain solvents should not come in contact with this 3D edgebanding, the product highlights its acrylic-based structure, which helps fabricators consider how edge-area materials interact with the transparent body during shop work.

The combination of 2mm thick acrylic and reverse-side printed 3D design works with automatic edgebanders set up for this material class, so once parameters are dialed in, the brushed aluminum effect remains stable along long runs sourced from the 246 foot roll.

The fact that this product is sold in full rolls only, in both broken and full box quantities with discount available for full box orders, supports planning for job quantities where a consistent 3D700R Brushed Aluminum edge is required across many parts.

Common Installer Questions About This Edge Banding

Select 3D700R Brushed Aluminum For Matching Edges

The 3D edgebanding in color 3D700R Brushed Aluminum from Doellken Woodtape gives you a 15/16 inch by 2mm transparent acrylic edge, printed on the reverse side, that is designed for automatic edgebander applications on projects calling for an aluminum-look edge.

The 246 foot roll length and clear identification through part number 3D700R-1402-29 support jobs where a consistent brushed aluminum edge is needed across many components, so this edge banding can be specified when planning aluminum-effect casework or fixtures.