Doellken PVC Edgebanding 1 5/16" x 2 mm, 700R Brushed Aluminum, 164', 3D700R 2102 28

3D Edgebanding For Brushed Aluminum Looks

3D edgebanding from Doellken Woodtape is a transparent acrylic edge banding that is printed on the reverse side, so the decorative brushed aluminum design is shielded by the acrylic layer and stays protected during everyday cabinet use and handling. The 2mm thick profile gives a substantial edge that stands up well on exposed cabinet fronts where a thin tape would feel light. The 1-5/16 inch width matches typical panel overhangs on many casework and fronts, helping cover the edge cleanly in a single pass. The 164 foot roll format supports longer production runs, so installers and shops can process multiple doors or panels without frequent roll changes. Designed for automatic edgebander applications, this product feeds consistently through standard machinery, supporting repeatable edges on production cabinet or fixture jobs.

Key 3D Edgebanding Details For Shop Work

• This 3D edgebanding is made of transparent acrylic, which places a solid protective layer over the printed design so the brushed aluminum look is less exposed to scuffing during normal cabinet use.
• The print is on the reverse side of the acrylic, which means the artwork is viewed through the clear layer, so color and pattern are shielded from direct contact during cleaning and handling.
• The product is designed for automatic edgebander applications, so it is suited to machine-fed workflows where consistent thickness and width support smooth feeding and trimming passes.
• The thickness is 2mm and the width is 1-5/16 inch, giving a robust edge that can cover standard board thicknesses while leaving enough material for clean radius trimming.
• The length is 164 feet per roll, giving shops enough material to run multiple cabinets or a full small project without frequent roll changes that interrupt the edgebanding process.

Installation And Automatic Edgebander Use

This 3D edgebanding is designed for automatic edgebander applications, so it works within standard machine processes where the banding is fed, glued, and trimmed in a continuous run. The 2mm thickness keeps the tape stable in the feed path, supporting clean cuts at the end trims and radius stations. The 1-5/16 inch width gives some working margin for trimming flush to the panel face, which helps achieve a straight, even edge profile. The product information specifies that glues or cleaners that contain solvents should not come in contact with this edgebanding, so water-based or other non-solvent products align best with maintaining the acrylic and print integrity during and after installation.

Using 3D700R Brushed Aluminum Edgebanding On Projects

Where This Brushed Aluminum Edge Banding Fits

The color 3D700R brushed aluminum finish on this edge banding is created by printing on the reverse side of the transparent acrylic, so the metallic effect shows through the clear surface and stays protected from direct wear. In cabinet or fixture work where a brushed aluminum appearance is desired on panel edges, this construction keeps the visual consistent with the flat surfaces while giving additional surface protection. The 1-5/16 inch by 2mm sizing lines up with common board thicknesses used in casework and commercial cabinetry, so panels with matching brushed aluminum surfaces can be edged in one pass without adding strips or build-ups. Because the product is made as 3D edgebanding from Doellken Woodtape, it pairs well with automatic edgebander settings that are tuned for thicker, decorative acrylic tapes, supporting steady throughput in a production environment.

Details That Support Consistent Edge Results

The transparent acrylic construction of this 3D edgebanding puts a uniform material against the edgebander rollers and trimming tools, which supports predictable heat transfer from the glue line and consistent trimming behavior along the entire panel length. With the print locked to the reverse side, the decorative layer is not disturbed by trimming knives or buffing units, so the brushed aluminum appearance remains even right to the edge. The 2mm thickness gives enough material for precise corner rounding without cutting into the printed layer, which is important on doors and fronts that will see repeated handling. The 164 foot roll length keeps the same color and batch running across multiple pieces, which helps maintain a uniform look in banks of cabinets or commercial fixtures that use the 3D700R-2102-28 specification throughout a project.

Common Questions About 3D700R Acrylic Edgebanding

Select 3D Edgebanding For Brushed Aluminum Runs

The 3D700R brushed aluminum 3D edgebanding from Doellken Woodtape combines transparent acrylic construction, reverse printing, and a 2mm by 1-5/16 inch by 164 foot format tailored for automatic edgebander applications. For cabinet or fixture projects that call for a brushed aluminum edge with protected graphics and a substantial feel, this full-roll edge banding offers a consistent specification that supports efficient production runs.