Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC edgebanding Tanners Lane from Doellken Woodtape is a PVC edge banding roll that finishes raw panel edges to match Tafisa L561 Tanners Lane Origen closely, so cabinets and casework keep a consistent visual line across doors, drawer fronts, and exposed shelves. The 15/16 inch width covers standard 3/4 inch panels with overhang for trimming, giving installers enough margin to flush-trim without exposing the substrate. The 0.018 inch thickness creates a thin, unobtrusive edge profile, which helps panels read as a single surface rather than a built-up edge. Supplied on a 600 foot roll, this edgebanding supports longer production runs on edgebanders or efficient use at a bench without frequent roll changes. The color designation 8683D Tanners Lane identifies the specific Doellken match, so repeat orders track the same design across projects.
This Doellken Woodtape PVC edgebanding, identified as manufacturer part 8683D-1518-1, uses its 15/16 inch width to span typical board thickness while leaving a modest lip for trimming, which lets edgebanders and hand trimmers generate clean, flush edges. The 0.018 inch thickness influences how the edge feels and looks at corners, supporting a light profile that does not visually bulk up door and panel edges. The roll length of 600 feet provides enough material to run a sequence of components with the same color 8683D Tanners Lane, which supports visual alignment across related parts in a project. The described close color match to Tafisa L561 Tanners Lane Origen ties the edge to the panel design so exposed ends do not distract from the surface pattern.
This PVC edgebanding in color 8683D Tanners Lane serves as edge treatment on casework, cabinetry, and furniture components built around the Tafisa L561 Tanners Lane Origen design, so exposed substrate edges present the same intended color story. The 15/16 inch by 0.018 inch format suits edges on panels near 3/4 inch thickness, where a slim edge is preferred to keep doors and drawer fronts appearing aligned when viewed in a bank. Because the banding is supplied on a 600 foot roll, it fits well into production environments where multiple cabinets, shelves, and partitions share the same decor, allowing long, continuous runs on edgebanders. In smaller shops, the same roll can support several coordinated projects whenever Tafisa L561 Tanners Lane Origen panels are specified, keeping the visual relationship consistent.
The Doellken Woodtape designation 8683D-1518-1 ties this PVC edgebanding directly to the Tanners Lane color 8683D and a 15/16 inch by 0.018 inch format, so ordering the same number reproduces the same appearance and geometry across phases of a job. The slim 0.018 inch thickness means less edge buildup, which supports tighter reveals where doors and drawer fronts meet, helping installers maintain even gaps in finished runs. The stated close color match to Tafisa L561 Tanners Lane Origen helps reduce visual transitions at corners and exposed edges, supporting a cleaner, more integrated look on wall units, closets, or commercial casework. Combined with the 600 foot roll length, these properties allow shops to standardize on one edgebanding specification whenever this Tafisa design is used, which streamlines layout, cutting lists, and edge-processing steps.
This edgebanding is 15/16 inch wide, 0.018 inch thick, and supplied in a 600 foot roll, which suits edging work on runs of panels near 3/4 inch thickness.
The 0.018 inch thickness creates a slim edge profile, helping cabinet doors and panels meet with tight-looking joints and a lighter visual edge.
This 8683D Tanners Lane PVC edgebanding is described as a close color match to Tafisa L561 Tanners Lane Origen, so edges align with that panel decor.
The 8683D Tanners Lane PVC edgebanding is manufactured by Doellken Woodtape, providing a defined product line and repeatable color reference.
Part number 8683D-1518-1 identifies this Doellken Woodtape PVC edgebanding as the 8683D Tanners Lane color in a 15/16 inch by 0.018 inch format.
The 600 foot roll length supports edging multiple cabinets, shelves, or partitions in the same decor, keeping color and edge profile consistent across the job.
This Doellken Woodtape PVC edgebanding in color 8683D Tanners Lane, sized 15/16 inch by 0.018 inch on a 600 foot roll, aligns closely with Tafisa L561 Tanners Lane Origen panels so exposed edges carry the same design. The defined manufacturer part number 8683D-1518-1 makes it straightforward to align your next run of cabinetry or casework with previous work in the same decor. For projects built around this Tafisa design, choosing this edgebanding lets panel faces and finished edges present as a unified surface from door to shelf to gable.