EPCO Recessed Pull 4-1/2" (114 mm) Long Polished Chrome, 4115-PC

EPCO DP4115-PC Recessed Pull For Clean Fronts

EPCO DP4115-PC recessed pull uses a stainless steel body with a polished chrome finish, giving a decorative hardware option that pairs corrosion-resistant material with a bright, finished appearance for visible cabinet and furniture faces. The pull has an overall length of 4-1/2 inches and an overall width of 1-5/8 inches, so it suits medium-size drawers and doors where a low-profile grip is preferred. Its projection or depth of 9/16 inch keeps the grip shallow, helping maintain a flat look where snagging on clothing or material would be a concern on busy jobsites or in work areas. As part of EPCO's recessed pulls collection, this unit provides a compact handhold cut into the surface rather than standing proud of the face, supporting a streamlined design in both commercial and residential casework.

Key Stainless Recessed Pull Details For Jobs

• The stainless steel material forms the core of the pull, adding strength to the recessed hardware so repeated use on active drawers and doors remains dependable in typical woodworking environments.
• The polished chrome finish over stainless steel gives the pull a bright, reflective look that matches other polished chrome hardware lines, simplifying visual coordination across cabinets and furniture runs.
• The 4-1/2 inch by 1-5/8 inch overall size creates a handhold area suited to standard cabinet drawer and door fronts, balancing grip room with the tighter spacing common in built-in installations.
• The 3-11/16 inch by 1-5/16 inch mounting hole size sets the required cutout, letting installers prepare accurate recess dimensions before fitting this pull into doors or drawers.
• The 9/16 inch projection or depth defines how far the recess extends into the panel, guiding material selection and layout where door or drawer thickness and internal clearances matter.
• The option to mount by side screw, pin mounting, or gluing offers several attachment approaches, allowing installers to match the pull's retention method to the door or drawer construction.

Recessed Pull Fit, Cutout, And Mounting Details

This recessed pull mounts flush with the face of the drawer or door, so the visible front stays flat while the grip pocket is sunk into the panel. With an overall size of 4-1/2 inches by 1-5/8 inches, it fits layouts that require a compact but usable pull footprint between adjacent fronts. The specified mounting hole of 3-11/16 inches by 1-5/16 inches defines the cutout, guiding routing or machining so the stainless steel body nests securely. A 9/16 inch projection or depth means the recess extends just over half an inch into the workpiece, important when balancing panel thickness against interior clearances or back-of-door components.

Using This EPCO Recessed Pull In Cabinet Work

Where This Stainless Recessed Pull Fits Best

This recessed pull is part of the EPCO recessed pulls collection, positioning it for applications where a pull that mounts flush with the face of the drawer or door is preferred. The 4-1/2 inch length and 1-5/8 inch width give it proportions suited to cabinet drawers, sliding doors, and lighter doors where a surface-mounted handle might interfere with adjacent panels or walkways. Because the pull mounts into a 3-11/16 inch by 1-5/16 inch opening, it serves cabinetmakers and installers who are routing repeatable pockets for multiple fronts, allowing consistent alignment across a bank of doors or drawers. The 9/16 inch projection or depth keeps the recess relatively shallow, which matters on thinner fronts where a deeper pocket could approach the back face or conflict with internal hardware.

Mounting Options That Support Different Builds

The pull mounts flush with the face while offering side screw, pin mounted, or glued installation options, providing several ways to secure it to the door or drawer construction. Side screw mounting uses the exposed stainless steel body as a stable anchor, giving a mechanical connection suitable for frequent operation on active cabinets. Pin mounting uses discreet pins in the body to locate the pull in the routed opening, helping maintain alignment in repetitive production runs. A glued option lets the pull bond directly into the prepared 3-11/16 inch by 1-5/16 inch recess, which can be useful in thinner materials where traditional fastener paths are limited. Across these methods, the stainless steel material and recessed design work together so the pull stays integrated with the front surface instead of standing off, supporting a low-profile, snag-resistant result that is important in tight corridors, shop fixtures, and flush cabinet lines.

Common Questions About This Recessed Cabinet Pull

Select The Right Recessed Pull For Your Run

The EPCO DP4115-PC recessed pull combines a stainless steel body, polished chrome finish, and flush mounting to support clean cabinet and furniture lines. With defined overall and mounting hole dimensions and a 9/16 inch depth, it gives installers predictable fit for routed openings. Multiple mounting methods - side screw, pin mounted, or glued - let this pull adapt to drawer or door construction choices. For projects calling for a polished chrome recessed pull sized at 4-1/2 inches by 1-5/8 inches, this model offers a clear, defined option to standardize across a run.