EPCO DP Series Recessed Pull For Flush Fronts

EPCO DP Series recessed pull is a stainless steel pull designed to sit flush with the face of a drawer or door, which keeps the front surface clear for tight spaces or clean-lined cabinet runs. The 115mm (4-1/2 inch) overall length and 42mm (1-5/8 inch) width define a compact pull area that fits many small to mid-size cabinet fronts where a low-profile grip is preferred. Stainless steel material combined with a stainless steel finish provides a uniform look that suits stainless-front cabinets or projects that call for metal hardware. The DP4115-SS manufacturer part number ties this pull to the EPCO DP Series line for consistent specification across similar openings. With a 14mm (9/16 inch) projection or depth, the pull sits shallow in the cutout, which helps maintain interior clearance behind the door or drawer.

Key Stainless Recessed Pull Details For Projects

• The 115mm (4-1/2 inch) length and 42mm (1-5/8 inch) width define the cutout footprint, which helps lay out consistent recess sizes across a bank of drawers or doors.
• The 93mm (3-11/16 inch) by 34mm (1-5/16 inch) mounting hole dimensions give precise opening sizes, supporting accurate milling or routing before final installation.
• Stainless steel material with stainless steel finish provides a metal pull body that visually matches other stainless details on casework or equipment fronts.
• The 14mm (9/16 inch) depth or projection determines how far the pull sits into the panel, which supports planning for material thickness and clearance behind the front.
• Pulls mount flush with the face of the drawer or door, which is useful where snag-free fronts or sliding-clearance against adjacent parts are required.
• Side screw, pin mounted, or glued mounting options give multiple attachment methods, which helps match the pull to the fabrication method used on the job.

Flush Recessed Pull Mounting And Fit Details

The 93mm (3-11/16 inch) by 34mm (1-5/16 inch) mounting hole size defines the opening needed so the DP4115-SS pull seats correctly in the recess without excess play. With the pull mounting flush to the face of the drawer or door, the front surface stays flat around the hardware, which suits applications where projecting pulls could interfere with sliding panels or passing traffic. The 14mm (9/16 inch) projection or depth shows how much material is occupied inside the routed pocket, helping align the recess depth to standard panel thicknesses. Side screw, pin mounted, or glued attachment options support different shop workflows, whether the preference is mechanical fastening from the side or bonding the pull into the prepped cutout.

Using This DP4115-SS Pull In Cabinet Workflows

Where This Stainless Recessed Pull Fits Best

The EPCO DP Series 115mm (4-1/2 inch) recessed pull works where a compact stainless steel grip is needed in a machined pocket on a drawer or door front. The stainless steel material with stainless steel finish suits cabinet, casework, or fixture fronts that already use stainless details, providing visual continuity across a run. Because the pulls mount flush with the face of the drawer or door, they are suited to layouts where doors pass close to each other or where fronts need to stay low profile. The 42mm (1-5/8 inch) overall width keeps the recess narrow, which is useful on slimmer drawer rails or narrower stile sections where wider pulls would crowd edges.

How Dimensions And Mounting Support Repeatable Results

The defined 93mm (3-11/16 inch) by 34mm (1-5/16 inch) mounting hole provides fixed dimensions for routing templates, which supports repeatable cutouts across multiple fronts. The 115mm (4-1/2 inch) overall length lets installers line up pulls evenly along the width of drawers or doors, helping maintain consistent sightlines on banks of cabinets. With a 14mm (9/16 inch) projection or depth, the DP4115-SS sits to a predictable depth inside the recess, which simplifies setting up machining for both depth and edge clearances. Side screw, pin mounted, or glued mounting choices allow the same pull design to be used with different shop standards, whether fasteners are driven from the side edge or the pull is bonded into the opening.

Common Questions About The DP4115-SS Recessed Pull

Choose This Recessed Pull For Stainless Flush Fronts

The EPCO DP Series DP4115-SS recessed pull combines a 115mm (4-1/2 inch) by 42mm (1-5/8 inch) footprint with a 93mm (3-11/16 inch) by 34mm (1-5/16 inch) mounting hole, which simplifies layout for consistent recesses on drawers and doors. Stainless steel material and finish match metal-focused projects, while the 14mm (9/16 inch) depth defines a clear machining target in the panel. With side screw, pin mounted, or glued attachment options, this recessed pull supports different shop installation preferences on stainless-accented casework.