EPCO BP Pull 12-5/8" (320 mm) Center to Center, Stainless Steel, BP320-SS

EPCO Stainless Steel Bar Pull For Cabinets

EPCO stainless steel bar pull BP320-SS is a 12-5/8 inch center-to-center handle that spans longer cabinet fronts for a continuous grip, which helps doors and drawers open smoothly along their full width. The pull is part of the EPCO BP Series stainless steel bar collection, so it follows a familiar straight-bar form that lines up cleanly across multiple cabinets. Its 320 mm center-to-center drilling dimension matches standard long-pull layouts, allowing consistent handle spacing across a bank of doors or drawers. The overall length of 15-5/8 inches leaves material beyond the screw holes, giving a visual margin at each end that looks proportional on wider fronts. Stainless steel construction provides a solid-feeling grip, which supports repeated use on high-traffic cabinets. The stainless steel finish visually pairs with other stainless details, creating a unified hardware appearance on the project.

Key Stainless Bar Pull Details That Matter

• The 320 mm center-to-center dimension aligns with long-pull drilling layouts, which streamlines boring operations when repeating the same spacing across multiple cabinet faces.
• The 12-5/8 inch center-to-center measurement in imperial units supports layout work when plans or jigs are marked in inches, simplifying tape-measure transfers on site or in the shop.
• The 15-5/8 inch overall length gives extra bar beyond the mounting points, which helps the pull look balanced on wider drawers or tall doors without appearing undersized.
• The stainless steel material creates a consistent bar profile from end to end, which helps the pull feel uniform in the hand and supports a clean, linear hardware layout.
• The stainless steel finish visually ties in with other stainless components, which keeps door and drawer hardware looking coordinated on a run of cabinets.
• The projection of 1-27/64 inches stands the bar off the front, which leaves finger clearance between the pull and the cabinet surface for a straightforward grip.

Mounting And Fit For EPCO BP320-SS Pull

The BP320-SS pull uses 320 mm (12-5/8 inch) center-to-center mounting, so the two fastener points fall on a long span that suits wide drawers and full-height doors. This spacing concentrates drilling at two precise locations, which helps keep fronts unbroken except where structural support is needed. The projection of 1-27/64 inches fixes how far the handle sits off the face, giving a consistent stand-off that affects both hand clearance and how far the bar visually floats from the cabinet. With an overall length of 15-5/8 inches, the ends extend past the mounting points, so layout can reference the screw centers while still delivering an extended bar that reaches further across the panel. The stainless steel material carries the same diameter along its length, which keeps mounting visually straight when lining up multiple pulls.

Using This Stainless Steel Cabinet Bar Pull

Where The EPCO BP Series Pull Fits

The EPCO BP Series 320 mm center-to-center pull works on cabinet doors and drawers that benefit from a longer handle run, because its 12-5/8 inch drilling span covers more of the front surface. The stainless steel construction supports use in cabinetry where metal hardware is part of the visual design, matching other stainless elements such as hinges or appliance fronts. The stainless steel finish keeps the pull visually consistent with other stainless steel bar pulls in the same collection, which is useful when mixing different lengths while maintaining the same profile. With an overall length of 15-5/8 inches, this bar pull can span a significant portion of a drawer width or door stile, distributing the gripping area so hands naturally land near the fastener line. Its 1-27/64 inch projection defines the gap between the bar and cabinet face, which sets the hand space for repeated openings.

Details That Support Repeatable Cabinet Results

The 320 mm center-to-center dimension on the BP320-SS gives a fixed measurement for jigs and drilling templates, which helps installers repeat the same hole pattern accurately across multiple cabinets. Listing the center-to-center distance as both 320 mm and 12-5/8 inches supports work from metric or imperial drawings, reducing conversion steps during layout. The 8-32 x 1 inch screw specification defines the thread size and length used with this pull, which guides the choice of fastener engagement through varying door or drawer thicknesses. The bar pulls 1-27/64 inch projection remains constant once mounted, so every handle in a run stands off the face by the same amount, improving alignment along long cabinet banks. The stainless steel bar and finish supply a uniform surface along the handle, which helps the grip feel the same at any point and keeps visual lines straight when multiple BP Series pulls are mounted together.

Buyer Questions About EPCO BP320-SS Pull

Select EPCO BP320-SS For Long Cabinet Runs

The EPCO stainless steel bar pull BP320-SS combines a 320 mm center-to-center span with a 15-5/8 inch overall length, giving cabinets a long, continuous handle line. Stainless steel construction and finish keep the pull visually consistent from end to end, supporting projects that use stainless hardware throughout. With a 1-27/64 inch projection, the bar stands off the face at a fixed distance, creating uniform hand clearance across doors and drawers. The specified 8-32 x 1 inch screw threading and length define the mounting interface, aligning this pull with common cabinet construction. For jobs calling for a straight, stainless steel bar pull in a 320 mm drilling pattern, the BP320-SS provides the dimensions and finish needed to match that layout.