EPCO BP Pull 18-7/8" (480 mm) Center to Center, Stainless Steel, BP480-SS

EPCO BP480-SS Stainless Steel Bar Pull Use

EPCO BP480-SS stainless steel bar pull gives you an 18-7/8 inch (480 mm) center to center handle that spans wide cabinet or drawer fronts in one clean run, which helps keep large doors easy to grab along their full working width. The pull is part of the EPCO BP Series, so it follows a consistent style line that supports uniform hardware layouts across a project. Stainless steel material provides a solid-feeling grip in everyday cabinet use, which matters when doors and drawers are opened repeatedly in kitchens, shops, or work areas. The stainless steel finish keeps the visual appearance aligned with other stainless details on the job, simplifying design coordination where a matched metal look is required. With its bar pull form and extended overall length, this handle creates a straight, continuous grab point that suits longer fronts where smaller pulls would break up the line.

Key Stainless Steel Bar Pull Details For Projects

• The 18-7/8 inch (480 mm) center to center dimension sets precise hole spacing, which helps installers drill or bore consistent mounting points across multiple doors and drawers.
• The overall 22-1/16 inch length creates a visually substantial handle, which supports proportionate hardware layouts on wider cabinet fronts or tall pantry doors.
• The 1-27/64 inch projection holds the bar off the surface at a defined distance, which gives fingers room to wrap behind the pull without crowding the door face.
• The stainless steel material forms the handle body, which supports a solid metal feel that aligns with typical decorative hardware expectations in woodworking projects.
• The stainless steel finish matches the base material, which provides a uniform metal appearance that works with stainless-faced appliances or other stainless components.
• The EPCO branding and BP Series designation identify a repeatable product line, which simplifies spec reuse when matching pulls across future work.

Mounting Dimensions And Bar Pull Alignment

The 480 mm (18-7/8 inch) center to center layout defines the exact distance between mounting points, which lets installers set up drilling jigs or boring patterns that repeat cleanly from cabinet to cabinet. The 22-1/16 inch overall length keeps each end of the bar extending past the mounting centers, which presents a balanced look once the pull is anchored on a door or drawer front. A 1-27/64 inch projection holds the bar away from the face, which limits knuckle contact with the surface as users pull doors open. The specified screw size of 8-32 by 1 inch sets the thread and length expectation at the connection points, which impacts how the pull seats against standard cabinet door and drawer front thicknesses.

Using This 480mm Stainless Bar Pull In Work

Where The BP480-SS Stainless Bar Pull Fits

The 18-7/8 inch center to center measurement positions this EPCO BP480-SS stainless steel bar pull for applications that are laid out around 480 mm spacing, which aligns with longer fronts where wider handle reach is needed for daily operation. Its stainless steel material and stainless steel finish place it visually with other stainless components, which is useful when cabinets sit beside stainless appliances or metal fixtures. The 22-1/16 inch total length allows the bar to cover a larger portion of the face, which can help users naturally grab the handle from different spots along the run without searching for a smaller pull. Because it is part of the EPCO BP Series, it works in layouts where multiple BP Series pulls are used in different sizes, tying long and short fronts together through the same basic profile.

Details That Support Consistent Mounting Results

The defined 480 mm (18-7/8 inch) center to center spacing on the BP480-SS gives installers a fixed drilling pattern, which reduces layout time once a jig or template is set for that dimension. The 1-27/64 inch projection determines how far the handle stands off the face, which influences both clearance for fingers and the shadow line against the surface in finished work. The 8-32 by 1 inch screw size specification indicates a common machine screw thread and length, which aligns with typical cabinet construction where a stable metal-to-metal connection is needed through the door or drawer material. Stainless steel construction and finish on a single bar form keep the pull visually and materially consistent, which helps maintain a uniform appearance across banks of cabinets installed in the same project.

Common Questions About The EPCO BP480-SS Pull

Selecting The Right 480mm Stainless Bar Pull

The EPCO BP480-SS stainless steel bar pull pairs its 480 mm (18-7/8 inch) center to center layout with a 22-1/16 inch overall length, which gives wide fronts a continuous handle in one piece. Stainless steel material and stainless steel finish present a unified metal look, which keeps cabinet lines visually consistent alongside other stainless elements in a room or workspace. When a project spec calls out EPCO BP Series hardware, this BP480-SS model provides the defined 8-32 by 1 inch mounting interface and 1-27/64 inch projection needed to line up drilling patterns and user grip across matching cabinets and drawers.