EPCO Stainless Steel Bar Pull For Long Runs
EPCO stainless steel bar pull defines this handle as a stainless steel bar-style pull from the EPCO BP Series, giving you a consistent look when matching other pulls in the same line. The 25-3/16 inch, or 640 mm, center to center dimension sets the mounting hole spread, so it suits wide drawers and tall doors that need a long, solid grip. Stainless steel material forms the entire pull, providing a hard metal surface that holds up under frequent use in busy cabinet areas. A stainless steel finish matches the base material, so wear lines do not expose a different color underneath during service. The overall length of 28-3/8 inches extends past the mounting points, giving extra hand clearance at each end. A projection of 1-27/64 inches stands the handle off the face, creating usable finger space for a secure pull on heavier fronts.
Key Stainless Bar Pull Details For Cabinets
- The EPCO BP Series designation ties this bar pull to a known product family, so matching or repeating pulls across a project stays visually consistent.
- The 25-3/16 inch (640 mm) center to center size fixes the drilling layout, simplifying planning when laying out long drawer banks or tall pantry doors on a line.
- Stainless steel material provides a solid metal construction, which supports repeated grabbing in kitchens, shops, or storage cabinets without softening or deforming.
- A stainless steel finish on stainless material keeps the appearance uniform, so edges and high-touch points continue to match surrounding stainless hardware over time.
- The 28-3/8 inch overall length spans a wide area on the front, giving users an extended grip area to pull from different spots along the handle.
- The 1-27/64 inch projection creates stand-off from the surface, giving space for fingers behind the bar when opening heavier or deeper cabinet components.
Mounting Dimensions That Drive Handle Fit
The 25-3/16 inch center to center dimension establishes the critical mounting measurement for this EPCO BP Series pull, guiding hole locations before drilling fronts. Because that span equals 640 mm, it aligns with metric layouts in many cabinet programs, keeping shop drawings clear. The 28-3/8 inch overall length shows how far the bar will visually run across a door or drawer, helping position it symmetrically on wide faces. The 1-27/64 inch projection states how far the pull stands out from the cabinet face, which affects clearance for fingers and any adjacent doors. Together, these fixed measurements let you map drilling and sight lines on drawings and jigs before committing to a run of fronts.
Using This 640 mm EPCO Pull In Projects
Where This Stainless Steel Bar Pull Fits Best
The EPCO BP Series 25-3/16 inch (640 mm) center to center stainless steel pull suits applications that call for a long, straight bar handle, such as wide drawers or tall cabinet doors. Its stainless steel material works in cabinets that use metal hardware as a design feature, letting the pull read as a clean linear element across the face. The stainless steel finish coordinates with other stainless components, supporting runs of pulls that need a consistent sheen and color tone along a bank of cabinets. With an overall length of 28-3/8 inches, the pull covers a significant width or height on the front, which can help visually balance larger cabinet faces. The 1-27/64 inch projection gives practical stand-off on deeper fronts, so the hand can wrap the bar without pressing knuckles into the door or drawer surface.
Why These EPCO BP640-SS Details Matter On Install
The 640 mm, or 25-3/16 inch, center to center dimension on the EPCO BP640-SS defines exactly where to bore the two mounting holes, which supports repeatable drilling when using templates or CNC layouts. Knowing the overall length is 28-3/8 inches helps locate the pull relative to door or drawer edges, so reveals and sight lines remain consistent across a run. The 1-27/64 inch projection gives a known stand-off that affects clearances near adjacent panels, walls, or appliance fronts, which matters when fronts open past each other. A stainless steel construction provides a uniform material through the bar and posts, which keeps the tactile feel consistent wherever users grip. Because the finish is also stainless steel, the visual appearance stays aligned with the base metal at corners and edges that see regular hand contact.
Common Questions About The BP640-SS Pull
What is the center to center size on this EPCO bar pull?
The EPCO BP Series BP640-SS bar pull has a 25-3/16 inch, or 640 mm, center to center dimension, which sets the hole spacing when laying out the handle on cabinet doors or drawers.
How long is the BP640-SS stainless steel pull overall?
The BP640-SS pull has an overall length of 28-3/8 inches, giving it a long visual span across the cabinet front for wide drawers or tall doors.
What projection does this stainless steel cabinet pull provide?
The EPCO stainless steel cabinet pull projects 1-27/64 inches from the surface, creating space behind the bar for fingers when opening doors and drawers.
What material and finish are used on this EPCO BP640-SS pull?
The BP640-SS pull is made of stainless steel and has a stainless steel finish, so the look and feel stay consistent across the bar and supports.
How does the 640 mm length help on wide cabinet fronts?
The 640 mm center to center span allows the pull to reach across a wider section of the front, providing multiple comfortable grip points along its length.
What product series and part number identify this bar pull?
This handle is part of the EPCO BP Series and carries manufacturer part number BP640-SS, which helps match it with other pieces or specify it on project documents.
Select This 640 mm EPCO Pull For Long Fronts
The EPCO BP Series BP640-SS stainless steel bar pull combines a 25-3/16 inch (640 mm) center to center span, 28-3/8 inch overall length, and 1-27/64 inch projection to handle larger cabinet fronts with a straight, functional grip. Stainless steel material with a stainless steel finish keeps the appearance and feel uniform across the handle in day-to-day use. For projects calling for a long, linear stainless pull with clearly defined mounting dimensions, this model aligns the drilling layout, visual balance, and hand clearance around a single, consistent hardware choice.
