8071 EZ pivot door slide from Knape and Vogt is a pocket door hardware set rated in the 30 lb class, so it is suited for medium-duty doors where a controlled slide-and-pivot action is needed. The 12 inch length in ebony black supports pocket door layouts that keep doors out of the way in use while matching darker casework. The slide set is part of the KV 8070/8071/8072 family, giving installers a consistent system for different hinge and mounting preferences. Designed as a top and bottom slide set, it lets the door track straight in and out of the pocket along a defined path. In multimedia, closet, or workspace cabinetry built around pocket doors in the 30 lb range, this slide helps keep the motion predictable and repeatable.
Knape and Vogt positions the 8071 slide as a top and bottom slide set, so the installation workflow centers on aligning those tracks to keep the door square in the opening and pocket. The follower strip bracket is designed so the follower strip can be installed after the slides are installed, which separates casework mounting from the final door linkage. The 12 inch slide length in this model supports pocket door runs sized for that stroke, aligning with cabinet depths planned around shorter travel. With the 42 inch by 24 inch maximum door dimensions, the layout stage can account for door size and opening clearances while staying within the intended operating range of this 30 lb class hardware.
The 8071 EZ pivot door slide sits in Knape and Vogt's pocket door hardware class, making it suited to cabinets where the door needs to retract into a pocket and then pivot out for access. The 30 lb class rating points it toward medium-duty doors rather than large structural panels, fitting common multimedia, closet, and workspace door sizes that stay within the 42 inch height and 24 inch width limits. The 12 inch length supports pocket doors that do not need full-depth travel, which helps in shallower cabinets or upper units. The ebony black finish visually ties into darker casework and equipment racks, supporting clean lines when doors are open or retracted.
The follower strip bracket design, which allows the follower strip to be installed after the slides have been installed, lets installers mount the 8071 top and bottom slides, set alignment, and then connect the door follower as a separate step. This staged workflow can simplify final door fitting in tight multimedia or workspace cabinets. Precision steel ball bearings in the slide support smooth and quiet operation, which is important when doors are cycled repeatedly in offices or home theaters. Multiple hinge options for inset, free-swing, overlay, thick, and extra thick doors mean the same 30 lb class slide system can serve different face treatments and door builds without changing the core slide geometry. Across the 8070, 8071, and 8072 slide packs, the common 30 lb class and shared model family help keep installations consistent when different hinge strategies are chosen in the same project.
The 8071 EZ pivot door slide is a 30 lb class component designed for medium-duty doors within the 42 inch high by 24 inch wide maximum door dimensions.
The follower strip bracket on the 8071 slide is designed so the follower strip can be installed after the slides are installed, allowing the cabinet slides to be set before linking the door.
The KV 8071 system supports multiple hinge options for inset, free-swing, overlay, thick, and extra thick doors, so the slide can work with different door motion and edge treatments.
This 8071 EZ pivot door slide is a 12 inch model in ebony black, aligning with darker cabinet designs and pocket door layouts that use a 12 inch slide stroke.
The 30 lb class rating places the 8071 slide in a medium-duty range, supporting typical cabinet doors built within that weight class for repeated pocket door operation.
The precision steel ball bearings in the 8071 slide provide smooth and quiet operation, which helps the door travel cleanly into and out of the pocket with reduced noise.
The 8071 EZ pivot door slide, model 8071PEZ EB 12 from Knape and Vogt, brings a 30 lb class, 12 inch, ebony black pocket door solution into the 8070/8071/8072 family. With defined door limits of 42 inch high by 24 inch wide, a follower strip bracket designed for post-install follower attachment, and multiple hinge options for inset, free-swing, overlay, thick, and extra thick doors, it fits pocket door cabinets that need predictable motion and a coordinated hardware system. For medium-duty pocket doors sized within these parameters, this slide set offers a focused way to execute a repeatable pocket door layout.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV8090CR Mfr# 8090P CR | 8092 Raised Panel Cassette Roller for Pocket Door Slides, 75lb Capacity, Black |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set | KV8071PEB-14 Mfr# 8071PEZ EB 14 | 8071 EZ Pivot Door Slide, 30lb Capacity, Ebony Black, 14", Polybag | ||||
Sold in: 1 Set | KV8071PEB-16 Mfr# 8071PEZ EB 16 | 8071 EZ Pivot Door Slide, 30lb Capacity, Ebony Black, 16", Polybag | ||||
Sold in: 1 Set | KV8071PEB-18 Mfr# 8071PEZ EB 18 | 8071 EZ Pivot Door Slide, 30lb Capacity, Ebony Black, 18", Polybag | ||||
Sold in: 1 Set | KV8071PEB-20 Mfr# 8071PEZ EB 20 | 8071 EZ Pivot Door Slide, 30lb Capacity, Ebony Black, 20", Polybag | ||||
Sold in: 1 Set | KV8071PEB-22 Mfr# 8071PEZ EB 22 | 8071 EZ Pivot Door Slide, 30lb Capacity, Ebony Black, 22", Polybag | ||||
Sold in: 1 Set | KV8071PEB-24 Mfr# 8071PEZ EB 24 | 8071 EZ Pivot Door Slide, 30lb Capacity, Ebony Black, 24", Polybag |