8072 EZ Pivot Door Slide For Medium-Duty Doors

8072 EZ Pivot Door Slide defines this Knape and Vogt pocket door hardware as a medium-duty slide set for doors up to 30 lb, so it suits projects where you need a compact pivot solution without stepping into heavy commercial hardware. As part of the KV 8070/8071/8072 30 lb Class, it is rated for doors up to 42 in high by 24 in wide, which helps you size entertainment, multimedia, or workspace doors confidently around the slide capability. The 18 in length places this model in a common cabinet depth range, so it integrates naturally with many standard casework layouts. The ebony black finish gives the hardware a dark, unobtrusive look, which blends into shadow lines behind pocket doors instead of drawing attention. As pocket door hardware, it is designed to let doors pivot and store out of the opening, clearing access to the interior for equipment or supplies.

Key Working Details Of This Pocket Door Slide

• This slide is classified as 30 lb Class, so it is built around medium-duty doors where the load stays within 30 lb for consistent movement.
• It supports maximum door dimensions of 42 in high by 24 in wide, which sets clear boundaries for cabinet door sizing and layout planning.
• The follower strip bracket accepts a follower strip installed after the slides, so you can hang and align the slides, then bring the follower strip in as a later step.
• Precision steel ball bearings deliver smooth and quiet operation, which helps doors travel predictably and reduces noise in finished living or workspace areas.
• Multiple hinge options accommodate inset, free-swing, overlay, thick, and extra thick doors, so one slide series can serve varied door builds and edge conditions.
• The 8072 slide pack uses base plates pre-attached to the slide bracket, which reduces assembly steps at installation and gives a consistent hinge plate position.

Installation-Oriented Details For 18 Inch Slide Mounting

This 18 in Knape and Vogt pocket door slide is identified as model 8072PEZ EB 18, tying together the 8072 series, EZ pivot format, ebony black finish, and 18 in length so it can be matched precisely to drawings and hardware schedules. As a top and bottom slide set within the 8072 format, it is configured for pocket door applications where both edges of the door need coordinated travel into the cabinet. The follower strip bracket is designed so the follower strip is installed after the slides have been mounted, allowing you to first secure the slide members to the cabinet and door positions, then integrate the follower strip once the slide action has been proven. Because the base plates are pre-attached to the slide bracket in this 8072 configuration, the hinge interface sits in a fixed relationship to the slide, which supports repeatable installation across multiple cabinets using the same hardware.

Using This 8072 EZ Slide In Real-World Cabinet Projects

Where This Pivot Door Slide Fits Best

This Knape and Vogt 8072 EZ Pivot Door Slide is listed under pocket door slides within pocket door hardware, so it addresses applications where doors need to pivot and retract into a cabinet rather than swing in front of it. With a maximum door envelope of 42 in high by 24 in wide, it works within typical entertainment, closet, or workspace cabinet door sizes where the door stays relatively narrow and tall. The 30 lb Class rating defines it as a medium-duty option, matching use cases where door construction and any attached hardware keep weight below 30 lb. Its 18 in length aligns with cabinet depths that often run near that measurement, so the door can recess into the case sufficiently. The ebony black color gives the hardware a dark profile, which suits installations where the slide is visible only in the pocket area and needs to visually recede.

Details That Support Repeatable Pocket Door Results

The follower strip bracket on this 8072 model is specifically described as allowing the follower strip to be installed after the slides have been installed, which lets you stage the work by mounting and aligning slides first, then tying the door edges together with the follower strip for synchronized action. Precision steel ball bearings within the slides provide smooth and quiet operation, so during final adjustments the door moves predictably and does not bind or chatter as it enters or exits the pocket. Multiple hinge options support inset, free-swing, overlay, thick, and extra thick doors, giving you flexibility to standardize on this slide series even when door overlays or thicknesses change between projects or cabinet runs. The fact that, in the 8072 slide pack, two base plates are pre-attached to the slide bracket means the hinge connection point is established at the factory, which saves layout steps and helps maintain consistent door reveal relationships from unit to unit.

Common Questions About This Knape And Vogt Slide

Select This 18 Inch Slide For Defined Door Parameters

This 18 in Knape and Vogt 8072 EZ Pivot Door Slide with baseplate, finished in ebony black and classified as 30 lb Class, gives a defined framework for medium-duty pocket doors up to 42 in by 24 in. The follower strip-ready bracket, precision steel ball bearings, and factory-attached base plates combine into a slide set that is engineered around predictable motion and repeatable mounting geometry. For cabinet runs or one-off builds using pocket doors within these limits, this model ties the slide, hinge interface, and door parameters into a single, clearly identified hardware choice.