Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Nexis cam adjustable wing mounting plate describes a Grass Nexis hinge mounting plate that sets the hinge position on the cabinet, so doors sit where you want them without re-drilling. This hinge mounting plate belongs to the Nexis family from Grass America, so it matches Nexis hinges in form and function on professional cabinet jobs. The 0mm plate height keeps the hinge at a neutral mounting level, which supports standard overlay layouts when using Nexis hinges. As a hinge mounting plate, it provides the fixed reference point on the cabinet side, so any adjustment happens through the cams instead of the screw pattern. The manufacturer part number F061073232236 identifies this exact 0mm, 3D cam, wing-style plate, which helps installers reorder the same part for consistent door alignment across multiple cabinets or future service work.
This Grass Nexis base plate uses pre-mounted Euro screws on the cabinet side, so the installer locates the prepared Euro holes and drives the existing screws rather than positioning loose fasteners. Because the plate height is 0mm, the hinge sits directly at the cabinet surface reference, simplifying layout where a neutral plate is specified. The Nexis two cam adjustment system provides separate height and depth adjustments, so installers can set basic door position and then fine-tune reveals with the cams instead of shifting the plate. With +3 mm/-1 mm of depth range and plus or minus 2 mm of height range, the same plate handles minor cabinet and door variation, which is common on larger runs.
This Nexis hinge mounting plate from Grass America is designed for cabinet installations that use Nexis clip-on hinges, so it becomes the cabinet-side anchor in the hinge system. The 0mm version fits projects where design calls for a neutral plate height, which keeps the overlay or inset relationship driven primarily by hinge selection. With three point fixing on the cabinet side, the plate spreads load across multiple Euro screw locations, which suits doors that are opened frequently in kitchens, commercial casework, or shop-built storage. Because it uses pre-mounted Euro screws, the plate works naturally with cabinets drilled on a Euro pattern, aligning with standard system 32 rows for predictable hinge positions. In production or multi-cabinet jobs, the repeated 0mm plate height and consistent screw layout help every door start from the same reference, improving uniformity across a run.
The Grass Nexis two cam adjustment base plates supply both height and depth tuning at the plate, which reduces rework when aligning multiple doors. Plus or minus 2 mm of cam height adjustment lets installers nudge doors up or down against neighboring fronts, trimming reveal differences without redrilling hinge locations. The +3 mm/-1 mm cam depth adjustment changes how far the hinge sits from the cabinet, which corrects small overlay shifts and helps set even margins between doors and cabinet faces. Because the hinge affixes via a clip-on design, doors can be hung, checked, and then popped off quickly if more casework work is needed, all without disturbing the adjusted cams. Over a full kitchen or bank of casework, that combination of 3D cam adjustment and stable three point fixing helps keep reveals consistent while controlling install time.
The Nexis 0mm component is a Grass Nexis hinge mounting plate, so it provides the cabinet-side base that a matching Nexis hinge clips onto for door installation.
The 0mm plate height sets the hinge directly at the cabinet surface reference, so overlay or inset results depend on the hinge choice instead of a raised or lowered plate.
The three point fixing version spreads the load across three Euro screw positions, so the mounting plate stays stable under repeated door use and consistent hinge action.
Pre-mounted Euro screws mean the plate is driven directly into Euro holes, so installers save time handling fasteners and gain predictable alignment on system 32 cabinets.
The Grass Nexis two cam adjustment base plate offers plus or minus 2 mm of height adjustment and +3 mm/-1 mm of depth adjustment for fine door positioning.
The clip-on hinge design allows the hinge to snap onto the plate, so installers can hang or remove doors quickly during fitting, finishing, or later alignment work.
The Grass Nexis cam adjustment plate with 0mm height, three point fixing, and pre-mounted Euro screws brings height and depth tuning directly to the cabinet-side hinge base, which supports accurate door reveals across a run. For projects built around Nexis clip-on hinges, this F061073232236 mounting plate offers a defined adjustment range and a repeatable Euro screw layout that suit both single cabinets and larger installations. Choose this Nexis cam adjustable wing mounting plate when a neutral plate height and on-plate 3D cam adjustment align with your cabinet drilling pattern and door layout goals.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GF318.493.70.0215 Mfr# F061073233236 | Nexis Cam Adjustable Wing Mounting Plate, 3-Point Fixing, Nickel-Plated, Screw-On, 2mm |
