Nexis 2-D Cam Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro-Screws, 4mm

Nexis Cam Adjustable Wing Mounting Plate Use

Nexis 2-D cam adjustable wing mounting plate describes a Grass America hinge mounting plate designed to support Nexis hinges in cabinet installations. The plate sits between the cabinet side and the hinge, so it sets the door position and allows precise adjustment. Its 4mm height positions the hinge at a specific offset from the cabinet side, which helps align doors when matching an existing layout or planning consistent reveals across a run of cabinets. As a hinge mounting plate in the Nexis family, it works with the Nexis clip-on connection described for these plates, which speeds up attaching and removing the hinge during fitting or later adjustment. The part is nickel-plated, so the surface resists wear in normal cabinet environments and maintains a clean look inside the case where hardware is visible during use or service.

Key Nexis Plate Details For Cabinet Jobs

• The plate is described as a Nexis two cam adjustment base plate, which gives both height and depth fine-tuning at the plate, so the installer can dial in consistent gaps on multiple doors.
• It offers plus or minus 2 mm of cam height adjustment, letting the door move up or down on the cabinet side to correct minor layout or drilling variation without remounting the plate.
• It offers plus 3 mm and minus 1 mm of cam depth adjustment, so the door can be moved closer to or farther from the cabinet side, helping achieve a flush look or correct slight racking.
• The hinge affixes to the plate via a clip-on design, which speeds hanging, removal, and re-hanging of doors during finishing or service, reducing time spent handling fasteners at the hinge joint.
• The cabinet side affixing method uses pre-mounted Euro screws, so the plate is fastened with those factory-installed screws into Euro-style holes, streamlining mounting on cabinet sides drilled for that system.
• This is a two point fixing version, meaning the plate is secured to the cabinet at two screw locations, which stabilizes the plate while still allowing adjustment through the integrated cams.

Plate Mounting, Height, And Adjustment Workflow

This Nexis cam adjustment base plate is identified with a 4mm height, so the built-in offset helps define the starting overlay or inset relationship between the door and cabinet when combined with the chosen Nexis hinge. The pre-mounted Euro screws are specified as the cabinet side affixing method, so the plate is driven into Euro system holes on the case side rather than requiring separate fastener selection. With the Nexis clip-on description, the hinge engages the plate without loose hinge-side fasteners, which simplifies mounting when working inside deep or narrow cabinets. The listed cam adjustments, plus or minus 2 mm in height and plus 3 mm and minus 1 mm in depth, mean the installer can do final alignment with a tool at the plate instead of re-drilling plates or shifting hinge locations.

Using The Grass Nexis Hinge Mounting Plate

Where This 4mm Nexis Wing Plate Fits

This hinge mounting plate is described as part of the Grass Nexis line, so it is intended for use with Nexis hinges that connect via the described clip-on interface at the plate. The 4mm height value defines the mounting plane for the hinge cup relative to the cabinet side when the plate is fixed to the case. On cabinet runs built with consistent drilling for Euro screws, the cabinet side affixing method using pre-mounted Euro screws lets the plate sit repeatably in the system holes, giving a consistent baseline for alignment across multiple doors. The wing style mounting layout noted in the product naming spreads the contact area along the cabinet side, which supports stable seating of the plate once the Euro screws are driven home.

Why Nexis Cam Adjustments Support Precise Results

The Nexis two cam adjustment description means this plate handles both height and depth tuning at the cam. The specified plus or minus 2 mm height cam range lets an installer shift the door edge up or down against neighboring fronts or panels to match reveals without changing the drilling pattern. The plus 3 mm and minus 1 mm depth range at the cam allows shifting the door closer to or slightly away from the cabinet side to refine the door-to-face alignment or match a face frame or panel plane. Because the hinge uses a clip-on attachment to this plate, doors can be removed and reattached while preserving these cam settings, which is useful during finishing or later field adjustments. The nickel-plated finish on the plate supports smooth operation of these cams and resists surface wear where tools contact the adjustment points. Together, these details help maintain consistent alignment over time while relying on the integrated adjustment built into the mounting plate.

Common Nexis Mounting Plate Questions Answered

Selecting This Nexis Plate For Your Cabinet Run

This Nexis cam adjustment base plate from Grass America combines a 4mm height, two point fixing, and defined cam ranges to support precise door alignment on Euro-drilled cabinets. The pre-mounted Euro screws and Nexis clip-on hinge connection streamline mounting and adjustment on site. When a project calls for Nexis hinge hardware with built-in cam height and depth control at the plate, this 4mm nickel-plated wing mounting plate provides the specified geometry and adjustment capability for controlled cabinet door positioning.