Nexis 2-D Cam Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro-Screws, 2mm

Nexis 2-D Cam Adjustable Wing Plate For Hinges

Nexis 2-D cam adjustable wing mounting plate gives a Grass Nexis hinge a 2 mm plate height that establishes your starting reveal at the cabinet, so you can match the hinge layout to the door and face geometry. The 2-point fixing design ties the plate solidly to the cabinet side at two locations, which helps keep the hinge position stable once you have alignment where you want it. Nickel-plated construction provides a hard, corrosion-resistant surface on the plate, supporting long-term use in typical cabinet environments. This Nexis mounting plate is part of the Grass America hinge system, so it works as the cabinet-side partner to a Nexis hinge in that hardware family. The wing mounting style spreads the bearing area on the cabinet panel, which supports a firm seat when you tighten the connections during installation.

Key Nexis Wing Mounting Plate Details

• The 2 mm mounting plate height sets a defined offset between cabinet and door, which matters when you are matching reveals across multiple doors in a run.
• Two-point fixing gives the plate two contact locations on the cabinet side, helping resist hinge creep when doors are loaded and used repeatedly.
• Nickel-plated finish on the plate creates a hard surface that tolerates normal cabinet use, which is helpful when hinges are adjusted or removed over time.
• The wing mounting form extends to either side of the screw line, giving a wider footprint on the panel that supports consistent seating on the cabinet surface.
• Pre-mounted Euro screws match cabinet construction using Euro screw drilling, so the plate can be driven directly into the system hole pattern during installation.
• Clip-on hinge connection lets a Nexis hinge attach to the plate without tools, which speeds hanging doors and later removal for adjustments or service.

Mounting And Adjustment Performance On Cabinets

Nexis 2-D cam adjustable wing mounting plate provides plus or minus 2 mm of cam height adjustment at the plate, so you can fine-tune the door up or down relative to the cabinet opening after initial mounting. The same cam system offers plus 3 mm and minus 1 mm of cam depth adjustment, letting you pull the door closer to the cabinet or ease it out to align with adjacent fronts. Cam-based adjustment can be dialed in from the front of the installed hinge, which shortens the time needed to correct gaps and flushness during final fit. Because this part is a 2-point fixing wing plate with pre-mounted Euro screws, it joins the cabinet side securely while supporting repeatable adjustments on Grass Nexis hinges.

Using This Grass Nexis Mounting Plate In Projects

Where This Nexis 2mm Wing Plate Fits Best

Nexis 2-D cam adjustable wing mounting plate is built as a hinge mounting plate in the Grass Nexis system, so it serves as the cabinet-side base for Nexis hinges on frameless or Euro-style casework drilled for Euro screws. The 2 mm plate height works as one option within the Nexis range, which is offered in heights from 0 mm through 8 mm, allowing a shop to select plate height that matches door overlay and cabinet design while still using the same hinge family. The wing mounting style suits cabinet sides where a wider plate footprint is preferred, giving more surface area around the Euro screw locations. In practice, this plate becomes the fixed reference on the cabinet, while the Nexis hinge uses that reference to swing and position the door.

How Nexis Cam Adjustments Support Clean Results

Nexis 2-D cam adjustable wing mounting plate uses its cam design to provide plus or minus 2 mm of height adjustment, which lets an installer shift the entire hinge position vertically to even out reveals between stacked doors. The plus 3 mm and minus 1 mm cam depth adjustment changes how far the door sits from the cabinet, so the face of the door can be brought into plane with nearby fronts or panel edges. Because the hinge affixes to the plate with a clip-on connection, the door can be placed on the plate quickly, adjusted through the cams, and then removed just as easily if further casework work is needed. In a production or retrofit setting, this combination of clip-on mounting and defined cam ranges reduces time spent correcting minor misalignments while keeping all adjustments accessible at the hinge and plate interface.

Common Questions About The Nexis 2mm Wing Plate

Selecting This Nexis Plate For Hinge Layouts

Nexis 2-D cam adjustable wing mounting plate, with its 2 mm height, cam adjustments, and pre-mounted Euro screws, is suited to cabinet projects built around Grass Nexis hinges. For casework needing controlled reveals, defined overlay, and accessible fine-tuning, this Grass America hinge mounting plate supports a straightforward workflow from case drilling through final door alignment.