Nexis 2-D Cam Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro-Screws, 0mm

Nexis Wing Mounting Plate For Adjustable Hinges

Nexis 2-D Cam Adjustable Wing Mounting Plate defines this Grass America hinge mounting plate as a Nexis system component with cam-based adjustment, so installers can set cabinet doors using built-in mechanisms rather than relying only on drilling precision. This hinge mounting plate belongs to the hinge mounting plates product class, which positions it as the interface between the Nexis hinge and the cabinet side, giving a consistent reference point across a run of doors. The 0mm height described in the SAP and web descriptions means the plate sits at a neutral height relative to the cabinet surface, which is useful when casework is built to standard system boring patterns. The two-point fixing version reference identifies that the plate fastens at two cabinet-side locations, helping maintain alignment when doors are cycled repeatedly.

Key Nexis Mounting Details That Support Installers

• The web description specifies that Nexis two cam adjustment base plates offer plus or minus 2 mm of cam height adjustment, which lets installers fine-tune the vertical position of a mounted door after installation to match reveals across multiple fronts.
• The same web description adds that these plates provide +3 mm and -1 mm of cam depth adjustment, giving additional control of the door-to-cabinet gap so doors can be brought closer or moved slightly away without remounting the plate or changing boring locations.
• The web description states that the cabinet side affixing method is pre-mounted Euro screws, which allows the plate to be secured into system holes sized for Euro screws so installers can use common line-boring patterns in cabinet production workflows.
• The web description further notes that the hinge affixes to the plate via a clip-on design, so once the plate is mounted on the cabinet side, the compatible Nexis hinge can be attached or removed without tools, supporting quick adjustment or replacement work.
• The same web description explains that Nexis two cam adjustment base plates are available in 0 mm through 8 mm heights, which gives shops flexibility to choose different mounting heights in the same hardware family to match construction styles or overlay targets.

Mounting And Clip-On Engagement For Nexis Hinges

The web description identifies this product as a Nexis two cam adjustment base plate, so it is designed to work as the base for Nexis hinges where fine-tuning with cams is part of the installation routine. The cabinet side affixing method described as pre-mounted Euro screws means the plate is secured through Euro screw holes, which fits directly into cabinet sides bored for that thread and diameter, supporting consistent spacing in frameless casework. The hinge affixes via clip-on design, so once the plate is fastened, the hinge arm can be attached in a repeatable motion that suits production environments or field adjustments. The two-point fixing version detail shows the plate relies on two fastening points on the cabinet side, giving a clear mounting pattern when laying out drilling or using automated boring equipment.

Using This Nexis Plate In Real Cabinet Projects

Where This 0mm Nexis Mounting Plate Fits Best

The product name specifies a 0mm Nexis mounting plate, so it fits layouts where the mounting plate height is intended to match a standard reference line in frameless or panel-based construction. The category Hinges|Hinge Base Plates confirms this plate is designed as the cabinet-side component in a hinge system, so it fits tasks where doors are hung on Grass Nexis hinges over consistent cabinet runs. The cabinet side affixing method of pre-mounted Euro screws suits cabinets bored for Euro screw threads, allowing shops using 32 mm system boring to drop this plate into existing hole patterns. The two-point fixing version notation means each plate uses two fastening locations, supporting stable fixed points on tall doors where repetitive opening and closing demands a solid cabinet-side anchor position.

Why Nexis Cam Adjustments Reduce Door Rework

The web description states that Nexis two cam adjustment base plates offer plus or minus 2 mm of cam height adjustment, so an installer can correct minor drilling or construction variation by raising or lowering the door slightly instead of redrilling cabinet sides, which reduces rework time. The same description explains there is +3 mm and -1 mm of cam depth adjustment, allowing the door overlay or reveal at the front of the cabinet to be tuned without changing plate position, which helps align face planes across a bank of doors. The hinge affixes via clip-on design, so after the plate is secured with the Euro screws, the hinge can be removed or reattached during adjustment sessions without disturbing the cabinet-side setup. Because Nexis two cam adjustment base plates are available in 0 mm through 8 mm heights, a shop can standardize on the same adjustment logic while selecting different plate heights to suit overlay changes or construction differences from project to project.

Common Nexis Wing Mounting Plate Questions

Selecting This Nexis Plate For Your Hinge Run

This Grass Nexis two cam adjustment base plate in 0mm height gives a neutral starting point with cam height and depth adjustment, so doors can be aligned to surrounding fronts without altering cabinet construction. The pre-mounted Euro screw fixing and two-point version details support straightforward cabinet-side mounting on system-bored panels. The clip-on hinge connection then lets you complete the Nexis hinge run in a repeatable sequence, using the same mounting logic across a bank of doors.