Nexis 2-D Cam Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro-Screws, 8mm

Nexis 2-D Cam Adjustable Wing Mounting Plate Use

Nexis 2-D cam adjustable wing mounting plate provides a dedicated base for Nexis hinges, creating a precise connection between hinge and cabinet that supports consistent door alignment across a run of cases. Grass Nexis two cam adjustment base plates offer plus or minus 2 mm of cam height adjustment and plus 3 mm/minus 1 mm of cam depth adjustment, so installers can fine-tune door position after hanging without redrilling or shifting the cabinet. The hinge affixes to plate via clip-on design, allowing fast hinge removal or installation while the plate stays fixed to the cabinet. This mounting plate is an 8 mm height version, setting the hinge at a defined offset that matters when matching an existing layout or following a hardware schedule. As part of the Nexis system from Grass America, it serves as the interface that turns cabinet and hinge into a single, adjustable assembly.

Key Nexis Mounting Plate Details That Matter

• Grass Nexis two cam adjustment base plates offer plus or minus 2 mm of cam height adjustment, giving vertical door tuning that helps align reveals with neighboring fronts.
• These Nexis base plates provide plus 3 mm/minus 1 mm of cam depth adjustment, which shifts the door in and out to refine overlay and close against the cabinet edge cleanly.
• The hinge affixes to plate via clip-on design, speeding up hanging and removal in the shop or on site because the plate stays on the cabinet while the hinge clips on and off.
• Cabinet side affixing method uses pre-mounted Euro screws, so the plate seats directly into system holes for a repeatable layout in line-bored cabinetry.
• This version is a two point fixing design, giving a stable mounting footprint that resists plate movement once tightened, which supports long-term hinge alignment.
• Nexis two cam adjustment base plates are available in 0 mm through 8 mm heights, allowing selection of the 8 mm offset here to suit a specific hinge geometry or door position.

Mounting And Adjustment On The Cabinet Side

The cabinet side affixing method uses pre-mounted Euro screws, so the Nexis 8 mm 3D cam wing plate locates directly into industry-standard system holes, which streamlines drilling operations in production environments. This version is a two point fixing plate, so two anchored positions tie it to the panel and provide a defined pivot reference for the hinge arm. Grass Nexis two cam adjustment base plates offer plus or minus 2 mm of cam height adjustment and plus 3 mm/minus 1 mm of cam depth adjustment, giving both vertical and in-out correction at the plate rather than altering door or case work. The hinge affixes to plate via clip-on design, making it practical to hang doors late in the process or pull them during finishing without disturbing the plate position.

Using This Nexis 8mm Plate In Real Projects

Where This Nexis Hinge Mounting Plate Fits

This Grass Nexis hinge mounting plate serves as the cabinet-side base in a Nexis hinge layout, so it works wherever a Nexis hinge is specified on a Euro-bored cabinet. The cabinet side affixing method uses pre-mounted Euro screws, which means the plate seats into system 32 style holes and establishes a repeatable hinge line across multiple cabinets. Nexis two cam adjustment base plates are available in 0 mm through 8 mm heights, and this plate is the 8 mm height version, so it suits applications that call for that specific mounting height to hit a target overlay or door reveal. The hinge affixes to plate via clip-on design, letting doors be hung after case installation while the fixed plate preserves the original hinge line during handling and transport.

How Nexis Cam Adjustments Support Repeatable Results

Grass Nexis two cam adjustment base plates offer plus or minus 2 mm of cam height adjustment, giving the installer the ability to nudge doors up or down to correct for drilling tolerances or case sag without altering the cabinet. These Nexis base plates also provide plus 3 mm/minus 1 mm of cam depth adjustment, so the door can be brought closer to or farther from the face of the cabinet to refine overlay, control reveal at face frames or ends, and tune the contact at soft-close or standard hinges. The two point fixing design locks the plate in position once the Euro screws are set, turning the cam adjustments into predictable, repeatable movements that hold once dialed in. Because the hinge affixes to plate via clip-on action, repeated adjustments or door removal do not disturb the plate, which supports consistent alignment across service visits or later modifications.

Common Questions About This Nexis Mounting Plate

Selecting This Nexis Plate For Your Hinge Runs

The Nexis 2-D cam adjustable wing mounting plate with 8 mm height gives Nexis hinge installations a defined mounting height plus cam-based height and depth adjustment, which is useful when precise reveals and overlays matter in cabinet runs. The cabinet side affixing method uses pre-mounted Euro screws, so it aligns with system-bored cases common in production shops and serious DIY layouts. With the hinge affixing to plate via clip-on design, door hanging and later removal stay straightforward while the plate maintains its reference on the cabinet. For Nexis hinge projects needing 8 mm mounting height and on-plate adjustment, this Grass Nexis hinge mounting plate from Wurth Baer Supply provides that defined setup.