Nexis Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro-Screws, 4mm

Nexis Adjustable Wing Mounting Plate For Hinges

Nexis adjustable wing mounting plate from Grass America is a hinge mounting plate that ties Nexis clip-on hinges solidly to the cabinet. The 4mm plate height sets a predictable door position, which helps keep reveals consistent across a run of cabinets. Economy stamped steel construction creates a rigid base for the hinge arm, supporting stable door movement under regular use. Nickel-plated finish covers the steel, providing a clean look in the cabinet interior while helping the surface resist routine handling during installation and adjustment. As part of the Grass Nexis base plate family, this wing plate is designed for use in cabinet installations where Nexis hinges are specified, giving installers a matched system from one manufacturer.

Key Nexis Base Plate Details For Cabinet Work

• Grass Nexis base plates are constructed of economy stamped steel, creating a solid hinge interface that supports the door as it opens and closes on typical cabinet installations.
• The plate affixes to the hinge via a clip-on design, so the hinge arm can be attached or removed from the plate without disturbing the plate position once it is mounted.
• Cabinet side fixing uses a two point style, giving the base plate a defined footprint on the cabinet panel that helps resist twisting during everyday door use.
• All base plates have plus or minus 2 mm of height adjustment, allowing the installer to fine-tune the mounted door position to align faces and reveals along the cabinet run.
• Available pre-mounted Euro screw models integrate Euro screws into the plate, streamlining installation into system borings designed for Euro fasteners.
• The plate can also attach with #6 x 5/8 inch flat head screws, supporting use on cabinet panels prepared for traditional screw mounting.

Mounting And Adjustment Details For Nexis Plate

This Nexis adjustable wing mounting plate uses a 2-point cabinet side fixing pattern, giving the plate a defined mounting geometry that seats firmly on the panel. The base plate provides plus or minus 2 mm of height adjustment, so small changes in plate position can be used to bring doors into plane after hanging. With the hinge arm affixing via a clip-on design, the plate can stay set on the cabinet while doors are removed or re-hung, helping preserve alignment. The 4mm plate height works within the Nexis system to establish the working overlay relationship between door and cabinet.

Using The Nexis 4mm Plate In Cabinet Runs

Where This Hinge Mounting Plate Fits Best

The Nexis 4mm wing mounting plate is part of the Grass Nexis base plate line, positioning it for cabinet projects built around the Nexis hinge system. The 4mm height plays a role in how the door overlays the case, providing a consistent reference when used across all cabinets in a bank. Economy stamped steel construction supplies a stable platform for standard cabinet doors, supporting repeated opening and closing in typical kitchen, bath, or casework applications. Nickel-plated steel helps the plate blend with other interior hardware while withstanding normal contact during installation and service work.

Pre-mounted Euro screw versions of the Nexis base plates are designed for use with Euro-style system borings, so once the cabinet is drilled to the pattern the plate seats directly into the prepared holes. Using Euro screws in this way ties the plate solidly into the panel thickness, which is valuable on frameless cabinets built around European construction methods. When cabinets are set up for #6 x 5/8 inch flat head screws, the same Nexis plate design accepts this fastening method, allowing it to serve in more traditional screw-based layouts. In both cases, the clip-on hinge interface lets installers handle door fitting and removal without disrupting the mounted plate.

How Nexis Height And Clip-On Design Help Alignment

The plus or minus 2 mm height adjustment built into all Nexis base plates gives installers room to correct small variations in drilling or case construction after doors are hung. By shifting the plate within this adjustment range, the door edge can be nudged up or down to meet adjacent doors or trim. This fine-tuning at the plate helps reduce rework, because adjustments occur at the hardware rather than at the cabinet or door.

The clip-on design between the Grass Nexis base plate and the hinge arm means the plate stays fixed while the door hardware is serviced. Doors can be removed for finishing, transport, or hinge work, and then reattached to the same plate position, helping preserve the carefully dialed-in alignment. The 4mm plate height works within the Nexis hinge geometry to keep overlays predictable from cabinet to cabinet, so once an installation pattern is established, it can be repeated efficiently on additional units.

Common Nexis Wing Mounting Plate Questions

Selecting This Nexis Plate For Your Cabinet Run

The Nexis adjustable wing mounting plate with 4mm height, stamped steel construction, and nickel-plated finish gives installers a defined hardware choice within the Grass Nexis system. With 2-point cabinet fixing, plus or minus 2 mm height adjustment, and a clip-on hinge interface, it supports consistent door alignment across cabinets. Options to fasten with pre-mounted Euro screws or #6 x 5/8 inch flat head screws let the same base plate design serve both Euro-style and traditional screw-based cabinet constructions on the job.