Nexis Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro-Screws, 0mm

Nexis Adjustable Wing Mounting Plate For Hinges

Nexis adjustable wing mounting plate is a stamped steel hinge mounting plate from Grass America that supports Nexis clip-on hinge installation on the cabinet side. The 0mm plate height positions the hinge cup close to the cabinet surface, which helps maintain the intended overlay or reveal in frameless layouts. The economy stamped steel construction provides a solid base for the hinge while helping control project cost on multi-door runs. The plate design works with the Nexis clip-on connection, so the hinge arm attaches to the plate without tools, which helps during hanging, adjustment, and later door removal. This plate is part of the Grass Nexis base plate family, so it follows the same interface the Nexis hinge arm expects, which simplifies layout across multiple cabinet sections.

Key Nexis Base Plate Details For Installers

• Nexis base plate identity ties directly to Grass Nexis hinges, so the hinge arm and plate are designed to work together, which supports consistent door alignment from cabinet to cabinet.
• Two point cabinet side fixing gives the mounting plate a stable hold on the cabinet surface, which helps the hinge resist movement when doors are opened repeatedly.
• The 0mm mounting plate height sets the hinge reference plane at cabinet surface level, which is useful when you are targeting standard frameless overlays or matching existing 0mm hardware.
• The clip-on hinge interface lets the Nexis hinge arm snap to the base plate, which speeds installation and lets you remove doors quickly for finishing or interior work.
• Pre-mounted Euro screw models are available for this Nexis base plate line, which helps when working with system holes designed for Euro screw engagement.

Mounting And Height Adjustment In Daily Work

Grass Nexis base plates provide plus or minus 2 mm of height adjustment built into the plate, which allows you to shift the door position vertically after the hinge is clipped on. This adjustment range lets you fine-tune reveals across a run of cabinets without moving the hinge cup in the door. Cabinet side fixing on this version uses two point attachment, so the plate is secured with two fasteners into the cabinet side. The product information specifies attaching with #6 x 5/8 inch flat head screws, which means the hole pattern and plate thickness are arranged to work with that screw size during mounting.

Using The Nexis Hinge Mounting Plate On Jobs

Where This Nexis Adjustable Wing Mounting Plate Fits

This Nexis adjustable wing mounting plate functions as the cabinet side component for Grass Nexis hinges in cabinet applications. The plate serves as the connection point for the Nexis clip-on hinge arm, so it lives on the cabinet side while the hinge cup is bored into the door. Because the mounting plate height is 0mm, it is suited to configurations where the designer or manufacturer has planned hinge geometry around a zero-height plate. In runs where multiple Nexis hinges are used, placing identical Nexis 0mm plates at each position keeps the hinge reference plane consistent, which supports even gaps between doors and coordinated alignment with adjacent cabinetry.

Why Nexis 0mm Plate Details Support Consistency

The plus or minus 2 mm height adjustment built into the Grass Nexis base plates lets you compensate for small drilling variations or material tolerances by moving the door up or down along the cabinet side. This means that during installation you can align the tops and bottoms of doors along a bank without reboring hinge cups, because the plate adjustment handles fine-tuning. The two point fixing style anchors the plate with two fastening points into the cabinet, which spreads the load from the door through the plate into the cabinet side and supports repeatable positioning when hinges are tightened. When you use the same Nexis 0mm plate along with the Nexis clip-on hinge design, the interface between hinge arm and plate stays the same from cabinet to cabinet, which helps repeat hinge placement patterns across a project.

Common Questions About This Nexis Hinge Mounting Plate

Selecting This Nexis Plate For Your Hinge Runs

The Nexis adjustable wing mounting plate from Grass America gives you a 0mm, two point fixing base that matches the Nexis clip-on hinge system. With plus or minus 2 mm height adjustment and #6 x 5/8 inch screw attachment, it supports accurate, repeatable hinge alignment on cabinet jobs.