Nexis 2-D Cam Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro-Screws, 6mm

Nexis 2-D Cam Adjustable Wing Mounting Plate Use

Nexis 2-D cam adjustable wing mounting plate from Grass America is a hinge mounting plate designed to work with Nexis clip-on hinges, so a hinge body locks onto the plate for a secure cabinet door connection. This plate provides +/-2 mm of cam height adjustment and +3 mm/-1 mm of cam depth adjustment, which lets you fine-tune door overlay and reveal directly at the plate for cleaner alignment on site. The 6 mm plate height establishes a specific hinge-to-cabinet spacing, helping keep multiple doors on a run consistent when using matching heights across the job. The nickel-plated finish on the plate provides a hard metallic surface, which stands up well inside cabinet interiors where hardware is regularly operated. As part of the Grass Nexis base plate family, this model fits into a system that offers 0 mm through 8 mm heights, giving flexibility to select the height needed across different cabinet constructions while keeping the same adjustment style.

Key Nexis Mounting Plate Details For Installers

• This Nexis 2-D cam adjustable wing mounting plate is part of the Grass Nexis base plate line, so it keeps adjustment style consistent across doors, simplifying setup and reducing time spent learning different hardware types.
• The 6 mm plate height sets a defined offset between hinge and cabinet, which supports repeatable layouts when multiple doors share the same construction and need matching reveals along a bank of cabinets.
• Cabinet side affixing using pre-mounted Euro screws gives a direct connection to Euro-bored cabinet sides, which speeds installation on system-built cabinets and keeps the plate registered in the hole pattern.
• The two point fixing version uses two fastening points at the cabinet side, providing a stable mounting platform that helps the hinge hold alignment when doors are opened and closed repeatedly.
• Nexis two cam adjustment base plates offer +/-2 mm cam height and +3 mm/-1 mm cam depth adjustment, allowing fine-tuning of door position without moving the cabinet, which helps correct small construction variances.
• The hinge affixes to the plate via a clip-on design, so the hinge body can be attached or removed without driving screws at the joint, which supports faster hanging, removal, and adjustment of doors on the job.

Mounting And Adjustment Details For Nexis Plate

This Grass Nexis 6 mm cam adjustment base plate is designed for cabinet side affixing using pre-mounted Euro screws, so the plate anchors directly into Euro-style bore patterns and stays accurately positioned. The two point fixing layout secures the plate with two fasteners, providing a solid base for the hinge arm to operate without unwanted shifting. The integrated cam system delivers +/-2 mm of height adjustment, which lets you move the door up or down at the plate to line up door tops and bottoms. It also offers +3 mm/-1 mm of depth adjustment, giving control over how tightly the door sits to the cabinet front, so you can dial in overlay and minimize door-to-face-frame or cabinet-side gaps.

Using The Grass Nexis 6mm Plate In Cabinet Runs

Where This Nexis Hinge Mounting Plate Fits Best

This Nexis 2-D cam adjustable wing mounting plate is a hinge mounting plate in the Grass Nexis system, so it is suited for cabinet projects using Nexis clip-on hinges where consistent adjustment behavior is important across multiple doors. The 6 mm plate height works as a defined spacing element between the cabinet side and the hinge arm, which is useful when a particular overlay or reveal has been engineered around that height in a cabinet line. Because cabinet side affixing is done with pre-mounted Euro screws, this plate fits Euro-style cabinet construction where system holes are used to locate hardware, supporting efficient production or repeat retrofit work. The two point fixing arrangement gives a firm connection at the cabinet side, which helps maintain alignment on taller or heavier doors that put more leverage on the hinge arm.

How Nexis Cam Adjustments Support Clean Results

The Nexis two cam adjustment design built into this base plate provides +/-2 mm of cam height movement, which directly affects how door top and bottom edges line up along a run of cabinets. That range allows you to correct small variances in cabinet construction or drilling locations without reworking the case, saving time during final fitting. The +3 mm/-1 mm cam depth adjustment gives front-to-back control over door position at the cabinet, so you can ease a door out to clear adjacent faces or pull it in to tighten the overlay. With the hinge affixing to the plate via a clip-on design, doors can be hung after plates are aligned, making it practical to set base plates first and then adjust doors while they are in place. As part of a group of Nexis two cam adjustment base plates available in 0 mm through 8 mm heights, this 6 mm version fits into layouts where varying plate heights are used to achieve different overlays while preserving the same adjustment behavior for installers.

Common Nexis 2-D Cam Mounting Plate Questions

Selecting This Nexis Mounting Plate For Your Job

The Grass Nexis 2-D cam adjustable wing mounting plate with 6 mm height, nickel-plated finish, and cabinet side affixing via pre-mounted Euro screws gives a defined, adjustable base for Nexis clip-on hinges. When a layout calls for a 6 mm offset and relies on Nexis cam height and depth adjustment, this plate provides the matching hardware to support clean door alignment and efficient installation in Euro-style cabinet construction.