Nexis Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro-Screws, 2mm

Nexis Adjustable Wing Mounting Plate For Hinges

Nexis adjustable wing mounting plate gives you a 2 mm plate height that establishes a consistent starting reveal on cabinets using compatible Grass Nexis hinges, which helps keep door lines uniform across a run. The Grass Nexis base plate is a hinge mounting plate in the Grass America Nexis family, so it works as the cabinet-side interface where the hinge arm clips on during assembly. Construction in economy stamped steel provides a solid, predictable base in typical cabinet environments where a stable hinge connection is critical. A nickel-plated finish on the mounting plate creates a clean metallic surface that resists handling wear during installation, which supports a neater look on exposed cabinet interiors. The base plate offers plus or minus 2 mm of height adjustment, so you can dial in minor door position changes after mounting, which helps correct small drilling or layout variations without rebuilding a cabinet.

Key Nexis Hinge Plate Details For Projects

• Grass Nexis base plates are part of the Grass America Nexis hinge system, so they serve as the cabinet-side partner to compatible Nexis clip-on hinge arms, which streamlines hardware choices on a job.
• Economy stamped steel construction gives the hinge base plate a rigid mounting surface, which helps the hinge arm hold door alignment under normal cabinet use without extra reinforcement steps.
• The mounting plate affixes to the hinge by a clip-on design, allowing the hinge arm to snap onto the plate, which speeds door hanging and simplifies removal during finishing or adjustment work.
• Cabinet side fixing with two-point style provides a defined mounting pattern, which lets you repeat drilling layouts across multiple cabinets for faster production and reliable alignment.
• All base plates have plus or minus 2 mm of height adjustment, so you can shift the door position slightly up or down, which is useful for fine-tuning reveals after the cabinet is installed.
• Pre-mounted Euro screws on some models give a ready-to-drive fixing option into compatible system holes, which can reduce setup time on European-style cabinet construction.

Mounting And Adjustment Details That Matter

The hinge mounting plate uses two-point cabinet side fixing, so each plate anchors at two locations on the cabinet panel, which provides a predictable footprint for drilling jigs and CNC programs. A 2 mm plate height establishes a known offset between the mounting surface and hinge arm, so hinge layouts can be standardized in design software and shop drawings. Plus or minus 2 mm height adjustment in the base plate lets you slide the hinge interface slightly, which helps align doors with uneven floors or walls by adjusting hardware instead of altering casework. The clip-on connection between the hinge arm and the Grass Nexis base plate allows you to mount plates first, then hang doors later in the workflow, which supports staged installation on site or in the shop. When used with #6 x 5/8 inch flat head screws on the cabinet side, the plate gains a flush-bearing connection at the countersunk holes, which reinforces stable seating against the panel.

Using This Grass Nexis Plate In Real Work

Where This Hinge Mounting Plate Fits Best

This hinge mounting plate is designed as part of the Grass Nexis base plates line, which places it in cabinet hinge applications using Nexis clip-on hinges from Grass America. The 2 mm plate thickness defines the hinge arm position at the cabinet, which suits installations where a standard offset is desired for consistent reveals and overlay calculations. Two-point cabinet side fixing means the plate seats on flat cabinet panel surfaces, making it suited to frameless or panel-based constructions that accept this pattern. Pre-mounted Euro screw models align with system holes common in European cabinet construction, so they support production where drilling patterns are already based on Euro-system dimensions. The nickel-plated finish on the economy stamped steel surface suits interior cabinet environments where a metallic appearance is appropriate and components need to tolerate repeated handling during fitting work.

Why Nexis Adjustment And Clip-On Design Help

All base plates in this Nexis range provide plus or minus 2 mm of height adjustment, giving you a built-in method to compensate for small layout discrepancies or door sag over time by shifting the hinge interface rather than altering the door. This adjustment is particularly useful when aligning multiple doors in a bank, because you can refine each door position on the cabinet side to maintain straight sight lines. The clip-on design between the hinge arm and the Grass Nexis base plate allows doors to be attached or removed without disturbing the cabinet side fixing, which supports finishing, transport, or service work where doors may need to come off temporarily. When the mounting plate is attached using #6 x 5/8 inch flat head screws on the cabinet side, the countersunk connection helps lock the plate into a repeatable position, which supports consistent reattachment of doors after removal. Economy stamped steel construction provides a firm substrate under these adjustments, so the plus or minus 2 mm movement remains controlled within the intended range.

Common Nexis Hinge Mounting Plate Questions

Selecting This Nexis Plate For Cabinet Runs

This Nexis adjustable wing mounting plate from Grass America combines a 2 mm plate height, two-point cabinet side fixing, and plus or minus 2 mm height adjustment, giving you a controlled hinge interface for Nexis clip-on hinges. Using the Grass Nexis base plate on a cabinet run supports standardized drilling, predictable door reveals, and efficient clip-on installation. For cabinet projects built around Grass Nexis hinges, this hinge mounting plate offers a focused way to establish consistent door alignment and straightforward adjustment across multiple openings.