Nexis Cam Adjustable Wing Mounting Plate, 3-Point Fixing, Nickel-Plated, Screw-On, 2mm

Nexis Cam Adjustable Wing Mounting Plate Use

Nexis cam adjustable wing mounting plate defines this Grass America hinge mounting plate as a Nexis series wing-style base plate designed for mounting Nexis hinges to the cabinet. The 2mm mounting plate height sets the hinge position relative to the cabinet, which helps maintain consistent door reveals across a run of cabinets. Grass Nexis two cam adjustment base plates provide plus or minus 2 mm of cam height adjustment, so the installed door can be shifted vertically without relocating the plate. The same base plates offer plus 3 mm and minus 1 mm of cam depth adjustment, allowing the hinge-to-plate engagement depth to be tuned for door-to-cabinet overlay and gap control. The nickel-plated finish on the mounting plate offers a clean metallic surface that complements typical cabinet hardware environments.

Key Details That Support Cabinet Hinge Work

• The Nexis cam adjustable wing mounting plate is part of the Grass Nexis hinge system, so it serves as the base interface between the hinge and cabinet side, which keeps hinge positioning repeatable across multiple installations.
• The 2mm mounting plate height positions the hinge cup relative to the cabinet side, giving a known reference that supports planning overlay and reveal when working from Grass Nexis drilling charts.
• Plus or minus 2 mm of cam height adjustment in the plate lets the installer move the door position vertically, which helps correct small drilling offsets or material variations without redrilling the cabinet.
• Plus 3 mm and minus 1 mm of cam depth adjustment allow the hinge-to-plate interface to be shifted in and out, which helps fine-tune the front gap between door and cabinet face for a consistent look.
• The cabinet side affixing method using pre-mounted Euro screws creates a positive location for the plate on system 32 style holes, which speeds layout and keeps plates aligned on multi-hinge doors.
• The three point fixing version of the mounting plate adds a third anchoring location, which supports stable hinge loading on heavier or taller doors where hinge stress is higher.

Installation And Adjustment Of Nexis Mounting Plate

The Nexis cam adjustable wing mounting plate is a screw-on style hinge mounting plate, so it fastens to the cabinet side using its pre-mounted Euro screws. This cabinet side affixing method fits Euro screw hole drilling, which lets the installer position each plate directly into the prepared system holes. Once installed, the hinge affixes to the plate via a clip-on design, so the hinge arm can be attached to or removed from the base plate without disturbing the plate position. The built-in plus or minus 2 mm cam height adjustment allows vertical tuning of the mounted door while the hardware stays fixed to the cabinet. The plus 3 mm and minus 1 mm cam depth adjustment provides another adjustment axis that supports precise door-to-cabinet alignment after the hinges are clipped on.

How This Grass Nexis Plate Performs In Use

Where The Nexis Cam Mounting Plate Fits Best

The Nexis cam adjustable wing mounting plate is a hinge mounting plate from Grass America designed for Nexis hinges in cabinet applications that use Euro screw system drilling. As a wing mounting plate, it spreads its footprint along the cabinet side, giving a stable base for hinges on frameless cabinetry or similar layouts using 32 mm system holes. The three point fixing version uses three fixing points, so the plate anchors solidly into the cabinet side when fastened with its pre-mounted Euro screws. In a cabinet run where multiple doors share a common reveal line, the defined 2mm mounting plate height sets a consistent starting plane for each hinge location. That consistent plane helps doors align visually from cabinet to cabinet when the same drilling pattern and plate height are used throughout the installation.

Why Nexis Cam Adjustments Support Precise Results

The Grass Nexis two cam adjustment base plates integrate both height and depth adjustment into the mounting plate body, so fine-tuning happens at the plate instead of at the cabinet drilling stage. The plus or minus 2 mm cam height adjustment lets the installer compensate for small layout variations or panel tolerances by moving the door leaf up or down with the cam, instead of relocating screw holes. The plus 3 mm and minus 1 mm cam depth adjustment provides front-to-back tuning at the hinge-to-plate joint, which helps dial in overlay and maintain even gaps between the door edge and adjacent fronts. Because the hinge affixes to the plate via clip-on design, doors can be temporarily removed and reattached during fitting without altering the cam settings that establish the final alignment. Using a three point fixing version also helps the plate stay put under repeated adjustments and door cycles, supporting long-term alignment on cabinets that see frequent use.

Common Questions About The Nexis Hinge Plate

Selecting This Nexis Plate For Your Hinges

The Nexis cam adjustable wing mounting plate from Grass America is a hinge mounting plate designed around Nexis hinges, three point fixing, and Euro screw cabinet side installation. Its 2mm mounting plate height, plus or minus 2 mm cam height adjustment, and plus 3 mm minus 1 mm cam depth adjustment give a defined, adjustable interface for door alignment on system-drilled cabinets. When a project calls for a Nexis hinge base plate with clip-on hinge connection and integrated adjustment, this Nexis cam adjustable wing mounting plate provides those functions in one nickel-plated mounting plate.