Amerock Manor Knob For Classic Cabinet Projects

Amerock Manor knob in oil-rubbed bronze is a decorative cabinet knob designed for projects that call for a genuine, distinctive and classic look. The Manor Collection celebrates the Jeffersonian spirit of American architecture, so the styling supports traditional and transitional cabinet designs where architectural detail matters. This knob is part of the Amerock Manor Collection, helping installers coordinate hardware across a room for a consistent visual line. The knob measures 1-1/2 in (38 mm) in length and 1 in (25 mm) in width, giving a substantial grip area that suits cabinet doors and drawers used every day. A projection of 1-3/16 in keeps fingers clear of the cabinet face, which helps reduce knuckle impact and scuffing on finished surfaces during regular use. The oil-rubbed bronze finish provides a dark, warm tone that works well on painted or stained wood in kitchens, baths or built-ins.

Key Manor Collection Details That Help On The Job

• The Manor Collection design is described as genuine, distinctive and classic, so it supports projects where a Jeffersonian architectural feel is part of the specification and consistent styling across multiple openings is important.
• The 1-1/2 in (38 mm) length paired with a 1 in (25 mm) width creates a balanced knob footprint, which helps installers center the pull visually on rails and stiles while giving users a comfortable gripping surface.
• The 1-3/16 in projection keeps the hand away from the door or drawer face, which helps protect finished cabinet surfaces from fingerprints and contact wear during frequent operation in busy environments.
• The oil-rubbed bronze finish provides a dark, traditional appearance, which lets builders match common oil-rubbed bronze hinges and latches so that the entire decorative hardware set reads as one coordinated system.
• The base diameter of 9/16 in creates a defined transition point at the cabinet face, which helps cover the drilled hole cleanly and gives the installation a finished, architectural look that aligns with the Manor Collection theme.
• The zinc die-cast material provides a rigid knob body, which supports precise machining of the mounting interface and helps the knob sit flush against the cabinet surface when tightened.

Cabinet Knob Fit, Dimensions, And Mounting Feel

This Amerock Corporation knob measures 1-1/2 in in length and 1 in in width, so layout on face frames, slab fronts, or narrow rails stays proportionate without overwhelming smaller doors. A 9/16 in base diameter focuses contact at a compact footprint, which lets fabricators position the knob close to stile edges while still covering the drilled hole cleanly. With a projection of 1-3/16 in, the knob provides enough clearance for a solid three-finger pull, helpful on heavier drawers or tall pantry doors. The knob is made from zinc die-cast material, so the body is formed in a controlled mold, supporting consistent sizing from piece to piece across a job. The oil-rubbed bronze finish gives cabinets a dark, classic tone that ties into other bronze hardware elements in the same space.

Using The Amerock Manor Knob In Real Projects

Where This Amerock Manor Knob Works Best

The Amerock Manor Series oil-rubbed bronze knob is suited to decorative hardware and moldings projects where a classic, Jeffersonian-inspired profile is desired. As a knob in the Amerock Manor Collection, it coordinates with other pieces from the same line, which matters when outfitting an entire kitchen, bath, or built-in system with matching hardware. The 1-1/2 in length and 1 in width make this knob practical on both doors and drawers, so installers can specify one part number across different cabinet types and maintain a consistent grip feel. A projection of 1-3/16 in gives hands room to pull without dragging against the cabinet surface, which is valuable on finished wood and painted fronts that need to retain a clean appearance over time. The oil-rubbed bronze finish supports designs calling for warm, traditional metal tones.

Details That Support Repeatable Cabinet Installations

The zinc die-cast construction of this knob provides a stable casting, which helps each piece share the same length, width and base diameter from unit to unit for reliable layout. The base diameter of 9/16 in defines a clear seating area on the cabinet face, so drilling jigs can be set to place the hole precisely under the center of that footprint. With a projection of 1-3/16 in, this Amerock cabinet knob BP26127ORB offers enough stand-off to clear typical door and drawer front thicknesses, which supports smooth operation when users grab the knob from different angles. The oil-rubbed bronze finish on this oil rubbed bronze cabinet hardware coordinates with other oil-rubbed bronze components in a project, helping hardware lines from Wurth Baer Supply present a unified look. The Manor Collection identity ties these details together so specifiers can document a single style across multiple rooms.

Common Questions About Amerock Manor Cabinet Knob

Select This Manor Knob For Coordinated Cabinet Work

The Amerock Manor Series BP26127ORB knob from Wurth Baer Supply combines a 1-1/2 in length, 1 in width and 1-3/16 in projection to deliver a practical grip for everyday cabinet doors and drawers. Its zinc die-cast construction and 9/16 in base diameter support consistent, flush seating across multiple openings. The oil-rubbed bronze finish ties into traditional metal tones, aligning with projects that call for the genuine, distinctive and classic character of the Manor Collection. For cabinet, vanity or built-in runs needing a unified hardware style, this Manor Collection cabinet knob offers dimensions and detailing suited to professional woodworking installations.