5mm Locking Shelf Support Double Pin, Clear

5mm Locking Shelf Support Double Pin For Thick Shelves

5mm locking shelf support double pin, clear is a shelf support from Hardware Concepts, Inc. that uses a unique double lock design to accept, support and lock in 3/4 inch and 1 inch thick shelves, so one support style handles common shelf thicknesses across a project. The clear plastic body keeps the support visually low profile, which helps the shelf and casework remain the focus rather than the hardware. Dual 5 mm and 1/4 inch diameter pins are set 32 mm center to center, tying directly into standard 32 mm system boring for straightforward layout on cabinet sides. The shelf rest area measures 1 inch long by 1/2 inch wide, providing a defined bearing surface under the shelf that helps distribute load along the edge of the panel. This shelf support is ANSI/BHMA tested and certified, so its performance is verified against established industry standards.

Key Shelf Support Details That Aid Layout

• The unique double lock design accepts, supports and locks in 3/4 inch and 1 inch thick shelves, so one part number works for both common panel thicknesses and simplifies planning on cabinet and closet runs.
• Dual 5 mm and 1/4 inch diameter pins set 32 mm center to center match standard system boring, so hole rows in cabinet sides can be drilled in a familiar pattern and still capture this specific support securely.
• The 1 inch long by 1/2 inch wide shelf rest area creates a defined bearing pad under the shelf edge, spreading contact over more surface area and helping the shelf seat consistently along the cabinet side.
• The clear plastic construction keeps the support visually subtle against most case interiors, which helps the hardware blend in while still providing the defined rest area and double locking function.
• ANSI/BHMA tested and certified construction ties the support to a known performance benchmark, which matters where repeatable, documented hardware performance is part of the project requirements.

Mounting Layout And Pin Spacing For Installation

This shelf support uses dual 5 mm and 1/4 inch diameter pins spaced 32 mm center to center, so the mounting interface aligns with the 32 mm system commonly used in cabinet construction. That fixed spacing lets boring machines or drilling jigs set consistent rows that accept this hardware without additional layout steps. With the shelf rest area at 1 inch long and 1/2 inch wide, the installer gains a predictable contact patch under the shelf, which is helpful when marking shelf positions or checking that the shelf edge engages fully on all supports. Because the support is designed to accept, support and lock in 3/4 inch and 1 inch thick shelves, installers can standardize on this layout for both thicknesses during fabrication.

Using This Shelf Support In Cabinet And Closet Runs

Where This Double Pin Shelf Support Fits Best

This shelf support is identified as a shelf, closet and garage organization part within the shelf supports product class, so it is intended for shelf applications across cabinets, closets and similar storage runs. The dual 5 mm and 1/4 inch pins set at 32 mm center to center match typical cabinet side hole patterns, which suits projects built around the 32 mm system. Because the unique double lock design accepts, supports and locks in 3/4 inch and 1 inch thick shelves, it works in applications using either common panel thickness without changing the support type between sections. The 1 inch by 1/2 inch shelf rest area also provides a defined landing point under the shelf edge, which is useful in storage runs where repeatable shelf alignment matters from bay to bay.

Details That Support Repeatable Shelf Alignment

The unique double lock design is described as allowing the shelf support to accept, support and lock in 3/4 inch and 1 inch thick shelves, which means the geometry is built around positive engagement with those two thicknesses for consistent seating. That function reduces variation when setting shelves at multiple elevations because the same support behavior is present for both panel sizes. Dual 5 mm and 1/4 inch pins at 32 mm center to center provide two contact points into the cabinet side, which helps maintain alignment of the support itself against the hole row. The 1 inch long by 1/2 inch wide shelf rest area creates a controlled bearing platform, so each shelf edge lands on a repeatable footprint instead of a small point. As an ANSI/BHMA tested and certified part, this support is tied to a documented hardware standard, which is relevant where project specifications call for certified shelf supports in cabinet or closet installations.

Common Questions About This Double Pin Shelf Support

Selecting This Shelf Support For Your Project

The 5mm locking shelf support double pin, clear from Hardware Concepts, Inc. combines a unique double lock design for 3/4 inch and 1 inch thick shelves with dual 5 mm and 1/4 inch pins at 32 mm center to center. That geometry works with standard 32 mm system boring while providing a 1 inch by 1/2 inch shelf rest area for stable support. With ANSI/BHMA tested and certified performance, it suits projects where documented shelf support details, defined bearing surfaces and compatibility with common shelf thicknesses are part of the hardware selection criteria.